1. ບົດແນະນຳ
This manual provides comprehensive instructions for the installation, operation, and maintenance of the Tbest Electric Throttle Control Handlebar Grip with LED Display. This product is designed for electric scooters, bicycles, tricycles, and other electric vehicles operating within a 12V-99V voltage ຊ່ວງ.
ເນື້ອໃນຊຸດ
- 1 x Right Handlebar (Throttle Control with LED Display)
- 1 x Left Handle Grip
- 1 x 2-meter Wiring Harness
ຮູບ 1: ເກີນview of the Tbest Electric Throttle Control Handlebar Grip set, showing the right-hand throttle with integrated LED display and the matching left-hand grip.
2. ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ຂໍ້ມູນຈໍາເພາະ |
|---|---|
| ວັດສະດຸ | Aluminium Alloy + Rubber |
| ສີ | ສີຟ້າ |
| ນ້ໍາຫນັກຊຸດ | Approx. 0.3 Kilograms (285g) |
| ຄວາມຍາວສາຍ | Approx. 2 meters (78.7 inches) |
| ປະເພດການຄວບຄຸມຄວາມໄວ | 3-gear switch (High, Middle, Low speed) |
| Compatibility (Vehicle) | 12V-99V Electric Bicycles, Scooters, Tricycles, and other Electric Vehicles |
| Handlebar Diameter Fitment | 22.2ມມ |
| ການເຮັດວຽກ Voltage (Throttle) | DC 0.8-4.2V |
| ການເຮັດວຽກ Voltage (Battery Indicator) | 12-84V (Automatic identification) |
| ຄວາມເຂົ້າກັນໄດ້ຂອງແບັດເຕີຣີ | Lithium battery, lead-acid battery, etc. |
3. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ
Proper installation is crucial for the safe and correct operation of your electric throttle. Ensure your vehicle's handlebar has a 22.2mm diameter for proper fitment.
ຂັ້ນຕອນການຕິດຕັ້ງ
- Remove existing handlebar grips.
- Slide the new left handle grip onto the left side of the handlebar.
- Slide the right handlebar (throttle control) onto the right side of the handlebar. Secure it firmly.
- Proceed with the wiring connections as detailed below.
ຮູບທີ 2: ລະເບີດ view illustrating the components of the throttle control and grip for installation.
ແຜນວາດສາຍໄຟ ແລະ ການເຊື່ອມຕໍ່
Caution: Incorrect wiring can lead to damage to the Hall sensor or LED display. If you are not a professional, please pay close attention to the wire order.
- ສາຍສີເຫຼືອງ: Power positive. Connect to the battery's positive terminal (e.g., +24V, +36V, +48V).
- ສາຍສີແດງ: Throttle positive (+5V).
- ສາຍສີຂຽວ: Throttle signal wire.
- ສາຍດຳ: Throttle negative.
For 3-gear speed control (if your controller supports it):
- ສາຍສີຂາວ: ຄວາມໄວສູງ.
- ລວດສີຟ້າ: Middle speed (shared line).
- ສາຍສີນ້ຳຕານ: ຄວາມໄວຕໍ່າ.
Note: The 3-gear speed control function will only work if your electric vehicle's controller supports speed regulation.
Figure 3: Detailed wiring diagram showing the connections for power, throttle, and speed control wires.
4. ຄໍາແນະນໍາການດໍາເນີນງານ
ການຄວບຄຸມການກະຕຸ້ນ
The right handlebar functions as the throttle. Twist the grip to control the speed of your electric vehicle. The throttle provides a smooth and responsive acceleration.
LED Display for Battery Level
The integrated LED display shows the real-time voltage value, allowing you to accurately determine the remaining battery charge. The system automatically identifies voltages ລະຫວ່າງ 12V ແລະ 84V.
ຮູບທີ 4: ໄລຍະໃກ້ view of the LED display, which shows the current battery voltage.
Interpreting Battery Voltage
Refer to the following table to understand the battery level based on the displayed voltage. vol ສູງສຸດtage indicates a full charge, while the minimum voltage indicates an exhausted battery.
| ປະລິມານນາມtage | ສູງສຸດ Voltage (Full) | ຫນ້ອຍ Voltage (Empty) |
|---|---|---|
| 12V | 12V | 9V |
| 24V | 29V | 21V |
| 36V | 42V | 29V |
| 48V | 54V | 39V |
| 60V | 72V | 49V |
| 72V | 84V | 60V |
This feature helps prevent unexpected power loss during travel and assists in assessing the health of your lithium battery.
Speed Gear Switch
The throttle includes a 3-gear switch (High, Middle, Low) to adjust the speed of your electric vehicle. This function requires your vehicle's controller to support speed regulation for it to be effective.
5. ບໍາລຸງຮັກສາ
To ensure the longevity and optimal performance of your Tbest Electric Throttle Control Handlebar Grip, follow these general maintenance guidelines:
- Keep the grips clean and free from dirt, dust, and moisture. Use a soft, damp ຜ້າສໍາລັບການທໍາຄວາມສະອາດ.
- Regularly inspect the wiring for any signs of wear, fraying, or damage. Ensure all connections are secure.
- ຫຼີກລ່ຽງການໃຫ້ຜະລິດຕະພັນຖືກອຸນຫະພູມສູງ ຫຼື ແສງແດດໂດຍກົງເປັນເວລາດົນ.
- Do not use harsh chemicals or abrasive cleaners on the grips or LED display.
6. ການແກ້ໄຂບັນຫາ
If you encounter issues with your electric throttle, refer to the following common problems and solutions:
- ບັນຫາ: The 3-gear speed switch has no effect.
ການແກ້ໄຂ: This function requires your electric vehicle's controller to support speed regulation. If your controller does not have this capability, the switch will not function. - ບັນຫາ: The throttle or LED display is not working, or there is a burning smell.
ການແກ້ໄຂ: Immediately disconnect power. This often indicates incorrect wiring. Review the wiring diagram in Section 3 and ensure all connections are made correctly. Incorrect wiring can cause damage to the Hall sensor or LED tube. If unsure, consult a professional. - ບັນຫາ: ລະດັບສຽງແບັດເຕີຣີບໍ່ຖືກຕ້ອງtage ການອ່ານ.
ການແກ້ໄຂ: Ensure the yellow power positive wire is correctly connected to the battery's positive terminal. Verify that the battery itself is functioning correctly and is within the 12V-84V operating range.
7. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
Specific warranty information for the Tbest Electric Throttle Control Handlebar Grip is not provided in this manual. Please refer to your purchase documentation or contact the retailer/manufacturer directly for details regarding warranty coverage and customer support.
