Moxa EDS-208 8-Port Unmanaged Ethernet Switch

1. ບົດແນະນຳ

This manual provides instructions for the installation, operation, and maintenance of the Moxa EDS-208 8-Port Unmanaged Ethernet Switch. The EDS-208 is designed for industrial networking applications, offering reliable 10/100BaseT(X) Ethernet connectivity in a compact, unmanaged form factor.

2. ຂໍ້ມູນຄວາມປອດໄພ

• ອ່ານຄໍາແນະນໍາທັງຫມົດຢ່າງລະອຽດກ່ອນທີ່ຈະດໍາເນີນການອຸປະກອນ.
• ຮັບປະກັນການສະຫນອງພະລັງງານ voltage is within the specified range for the device. A power supply is not included and must be purchased separately.
• ຢ່າເຮັດໃຫ້ອຸປະກອນມີຄວາມຊຸ່ມຊື່ນ ຫຼືອຸນຫະພູມສູງສຸດ.
• ພຽງແຕ່ບຸກຄະລາກອນທີ່ມີຄຸນວຸດທິຄວນປະຕິບັດການຕິດຕັ້ງແລະການບໍາລຸງຮັກສາ.
• ຕັດການເຊື່ອມຕໍ່ໄຟກ່ອນທຳຄວາມສະອາດ ຫຼື ບໍລິການອຸປະກອນ.

3. ເນື້ອໃນຊຸດ

Before installation, verify that the package contains the following items:

• Moxa EDS-208 Unmanaged Ethernet Switch
• ຄູ່ມືການຕິດຕັ້ງແບບໄວ (ຖ້າມີ)
• ບັດຮັບປະກັນ (ຖ້າລວມ)

ຖ້າມີລາຍການໃດນຶ່ງຫາຍສາບສູນ ຫຼື ເສຍຫາຍ, ກະລຸນາຕິດຕໍ່ຕົວແທນຝ່າຍຂາຍຂອງທ່ານເພື່ອຂໍຄວາມຊ່ວຍເຫຼືອ.

4. ຜະລິດຕະພັນເກີນview

ຮູບທີ 1: Moxa EDS-208 Unmanaged Ethernet Switch. This image displays the Moxa EDS-208 unmanaged Ethernet switch. The front panel features eight 10/100BaseT(X) RJ45 ports, numbered 1 through 8. Above the ports, the Moxa logo is visible, along with a 'P' indicator and a power LED. At the top, a green removable terminal block is present for power input. The device has a dark grey plastic housing with ribbed sides for heat dissipation.

4.1. ຮູບ​ແບບ​ກະ​ດານ​ຫນ້າ​

• Power Input Terminal Block: Located at the top, a green removable terminal block for connecting the DC power supply.
• Power LED (P): ຊີ້ບອກສະຖານະພະລັງງານຂອງອຸປະກອນ.
• 10/100BaseT(X) Ports (1-8): Eight RJ45 ports for connecting Ethernet devices. Each port supports 10 Mbps or 100 Mbps operation.
• ການເຊື່ອມຕໍ່ / ກິດຈະກໍາ LEDs: Integrated into each RJ45 port, these LEDs indicate network link status and data activity.

5. ຕັ້ງຄ່າ

5.1. ການຕິດຕັ້ງ Switch

The EDS-208 supports DIN-rail mounting. To mount the switch:

1. Attach the DIN-rail mounting kit (if not pre-installed) to the rear of the switch.
2. Hook the top of the DIN-rail clip over the top edge of the DIN rail.
3. Press the switch firmly against the DIN rail until the clip snaps into place.

5.2. ການເຊື່ອມຕໍ່ພະລັງງານ

Important: A power supply is NOT included with the EDS-208 and must be purchased separately. Ensure the power supply meets the device's voltage ແລະຄວາມຕ້ອງການໃນປະຈຸບັນ.

1. ໃຫ້ແນ່ໃຈວ່າແຫຼ່ງພະລັງງານຖືກປິດ.
2. Connect the positive and negative wires from your DC power supply to the corresponding terminals on the green removable terminal block at the top of the switch. Refer to the terminal block markings for correct polarity.
3. Insert the terminal block firmly into its receptacle on the switch.
4. Turn on the power source. The 'P' LED on the front panel should illuminate, indicating power is supplied.

5.3. ການເຊື່ອມຕໍ່ອຸປະກອນເຄືອຂ່າຍ

Connect standard Ethernet cables (Cat5e or better) from your network devices (e.g., computers, servers, other switches) to any of the eight RJ45 ports on the front panel of the EDS-208. The switch automatically detects the speed (10 Mbps or 100 Mbps) and duplex mode of the connected devices.

6. ການດໍາເນີນງານຂອງ Switch

6.1. ຕົວຊີ້ວັດ LED

The EDS-208 features several LED indicators to provide status information:

• Power LED (P):
  • ເປີດ: ຕົວປ່ຽນແມ່ນ ກຳ ລັງຮັບພະລັງງານ.
  • ປິດ: ສະຫວິດບໍ່ໄດ້ຮັບພະລັງງານ.
• Link/Activity LEDs (per RJ45 port):
  • ເປີດ: A valid network link is established.
  • ກະພິບ: ຂໍ້ມູນກຳລັງຖືກສົ່ງຕໍ່ ຫຼື ຮັບຜ່ານພອດ.
  • ປິດ: ບໍ່ມີການເຊື່ອມໂຍງເຄືອຂ່າຍຖືກສ້າງຕັ້ງຂຶ້ນ.

6.2. ການທໍາງານພື້ນຖານ

The EDS-208 is an unmanaged switch, meaning it operates automatically without requiring any configuration. It provides basic Ethernet switching functions, including:

• Store-and-Forward Switching: Ensures data integrity by checking for errors before forwarding frames.
• ການເຈລະຈາອັດຕະໂນມັດ: Automatically determines the best speed and duplex mode for each connected device.
• ອັດຕະໂນມັດ MDI/MDI-X: Automatically detects and adjusts for straight-through or crossover Ethernet cables.
• Broadcast Storm Protection: Helps prevent network congestion caused by excessive broadcast traffic.

7. ບໍາລຸງຮັກສາ

7.1. ທໍາຄວາມສະອາດ

To clean the switch:

1. Disconnect power to the device.
2. ໃຊ້ຜ້າອ່ອນແລະແຫ້ງເຊັດດ້ານນອກຂອງສະວິດ.
3. ຢ່າໃຊ້ນໍ້າຢາລ້າງຂອງແຫຼວ ຫຼື ນໍ້າຢາສີດ, ເພາະມັນອາດຈະເຮັດໃຫ້ອຸປະກອນເສຍຫາຍໄດ້.

7.2. ການພິຈາລະນາດ້ານສິ່ງແວດລ້ອມ

Ensure the switch operates within its specified temperature and humidity ranges. Avoid placing the switch in areas with excessive dust, vibration, or direct sunlight. Proper ventilation is crucial for optimal performance and longevity.

8. ການແກ້ໄຂບັນຫາ

9. ຂໍ້ມູນຈໍາເພາະ

10. ການຮັບປະກັນແລະການສະ ໜັບ ສະ ໜູນ

10.1. ຂໍ້ມູນການຮັບປະກັນ

Moxa products are covered by a limited warranty. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official Moxa webເວັບໄຊ. ຮັກສາຫຼັກຖານການຊື້ຂອງທ່ານສໍາລັບການຮ້ອງຂໍການຮັບປະກັນ.

10.2. ສະຫນັບສະຫນູນດ້ານວິຊາການ

If you encounter any issues that cannot be resolved using this manual, please contact Moxa technical support. You can find contact information on the official Moxa webເວັບໄຊ (www.moxa.com) ຫຼືຜ່ານຕົວແທນຈໍາຫນ່າຍທ້ອງຖິ່ນຂອງທ່ານ.