1. ບົດແນະນຳ
This manual provides essential information for the safe and efficient operation of your Behringer NX1000 Ultra-Lightweight 1000W Class-D Power Amplifier. Please read this manual thoroughly before using the product to ensure proper setup, usage, and maintenance.
ດ້ານໜ້າ view of the Behringer NX1000 amplifier, showcasinການອອກແບບທີ່ກະທັດຮັດ ແລະ ການຄວບຄຸມແຜງດ້ານໜ້າ.
2. ສິ່ງທີ່ຢູ່ໃນກ່ອງ
ກວດສອບວ່າອົງປະກອບທັງຫມົດແມ່ນມີຢູ່ໃນການຍົກເລີກການຫຸ້ມຫໍ່:
- Behringer NX1000 Ultra-Lightweight 1000-Watt Class-D Power Ampມີຊີວິດຊີວາ
- ສາຍໄຟ
- ຄູ່ມືແນະ ນຳ (ເອກະສານນີ້)
3. ຄຸນນະສົມບັດທີ່ສໍາຄັນ
- Delivers 2 x 500 watts into 2 ohms; 2 x 300 watts into 4 ohms; 1000 watts into 4 ohms (Bridge mode) and weighs less than 7.3 lbs/ 3.3 kg.
- Ultimate reliability through revolutionary cool-running high-density Class-D technology with "near-zero" Thermal buildup.
- ການສະໜອງພະລັງງານໂໝດສະວິດທີ່ມີປະສິດທິພາບສູງ ສຳລັບສຽງທີ່ບໍ່ມີສຽງລົບກວນ, ການຕອບສະໜອງຊົ່ວຄາວທີ່ດີກວ່າ ແລະ ການໃຊ້ພະລັງງານຕໍ່າ.
- Built-in stereo crossover with low-cut, high-cut and full range Mode.
- SmartSense loudspeaker Impedance compensation features fully Linear frequency response at any speaker load Impedance.
An efficiency graph illustrating the superior performance of Class-D technology compared to Class-AB, showing higher efficiency across various output power levels.
A frequency response graph demonstrating the linear output achieved by SmartSense loudspeaker impedance compensation, ensuring consistent sound quality regardless of speaker load.
4. ຕັ້ງຄ່າ
Proper setup is crucial for optimal performance and safety. Follow these guidelines for connecting your ampມີຊີວິດຊີວາ:
4.1. ການຕິດຕັ້ງ Rack
The NX1000 is designed for standard 19-inch rack mounting. Secure the amplifier using appropriate rack screws through the rack ears on both sides of the unit.
ດ້ານຂ້າງfile of the Behringer NX1000 amplifier, highlighting its rack-mountable chassis.
4.2. ການເຊື່ອມຕໍ່ສຽງ
ເຊື່ອມຕໍ່ແຫຼ່ງສຽງຂອງທ່ານ (ເຄື່ອງປະສົມສຽງ, ເຄື່ອງປະສົມສຽງກ່ອນ)amplifier, ແລະອື່ນໆ) ກັບ amplifier's input jacks. The NX1000 supports both XLR and 1/4-inch TRS connectors for balanced input signals.
Connect your passive loudspeakers to the amplifier's output terminals. The NX1000 provides both speakON and binding post outputs for flexible speaker connectivity.
ລະອຽດ view of the rear panel, showing input and output connectors for audio signals and speakers.
4.3. ການເຊື່ອມຕໍ່ພະລັງງານ
Connect the supplied power cable to the AC inlet on the rear panel of the ampເຄື່ອງເປີດໄຟ ແລະ ຈາກນັ້ນໄປຫາປລັກໄຟຟ້າທີ່ເໝາະສົມ.
4.4. ວິດີໂອຄູ່ມືການຕັ້ງຄ່າ
A step-by-step guide on how to set up D Series amplifiers, covering speaker connections, input sources, and mode selection for various audio configurations.
5. ປະຕິບັດການ Ampມີຊີວິດຊີວາ
5.1. ເປີດ / ປິດພະລັງງານ
ກົດ ພະລັງງານ switch on the front panel to turn the amplifier on or off. The ພະລັງງານ LED will illuminate when the unit is active.
Close-up of the power button, indicating its location on the front panel.
5.2. ການຄວບຄຸມປະລິມານ
ປັບ ຊ່ອງ A ແລະ ຊ່ອງ B gain knobs on the front panel to set the desired output volume for each channel. The LCD display will show the decibel levels for precise adjustment.
5.3. ການເລືອກແບບ
On the rear panel, use the ໂໝດ switch to select between STEREO, ຫ້າມ, ຫຼື ຂະໜານ operation, depending on your speaker configuration requirements.
- STEREO: Each channel operates independently, providing separate left and right audio signals.
- BRIDGED: Combines the power of both channels into a single, high-power output, ideal for driving a single subwoofer.
- ຫມວດຫມູ່: Sends the same mono signal to both channels, useful for driving multiple speakers with identical audio.
5.4. ການຕັ້ງຄ່າຄຣອສໂອເວີ
Utilize the built-in stereo crossover with low-cut, high-cut, and full-range modes to optimize the frequency response for your specific speakers or subwoofers.
5.5. ຕົວຊີ້ວັດ LED
The front panel features several LED indicators:
- PRO (Protect): illuminates ຖ້າຫາກວ່າ amplifier enters protection mode due to overload, overheating, or short-circuit.
- ຈຳກັດ: Indicates that the output signal is approaching clipping. Reduce the input level to prevent distortion.
- ສັນຍານ: Lights up when an audio signal is present on the respective channel.
- ພະລັງງານ: ຊີ້ໃຫ້ເຫັນວ່າ amplifier ເປີດຢູ່.
5.6. ຜະລິດຕະພັນເກີນview ວິດີໂອ
ຫຼາຍກວ່າview video demonstrating the features and connectivity options of the D Series power amplifiers, including front panel controls, input/output configurations, and operational modes.
6. ບໍາລຸງຮັກສາ
ເພື່ອຮັບປະກັນອາຍຸຍືນແລະປະສິດທິພາບທີ່ດີທີ່ສຸດຂອງທ່ານ amplifier, follow these maintenance tips:
- ຮັກສາເຄື່ອງໃຫ້ສະອາດໂດຍການເຊັດດ້ວຍຜ້າອ່ອນ, ແຫ້ງ. ຫຼີກເວັ້ນການນໍາໃຊ້ເຄື່ອງເຮັດຄວາມສະອາດຂັດຫຼືສານລະລາຍ.
- ຮັບປະກັນການລະບາຍອາກາດທີ່ພຽງພໍອ້ອມຮອບ amplifier to prevent overheating. Do not block the ventilation grilles.
- ກວດເບິ່ງການເຊື່ອມຕໍ່ສາຍເຄເບີນທັງໝົດເປັນປະຈຳເພື່ອຄວາມສອດຄ່ອງທີ່ປອດໄພ ແລະ ອາການສວມໃສ່.
7. ການແກ້ໄຂບັນຫາ
If you encounter issues with your Behringer NX1000 amplifier, ອ້າງເຖິງບັນຫາທົ່ວໄປຕໍ່ໄປນີ້ແລະວິທີແກ້ໄຂ:
- ບໍ່ມີສຽງອອກ:
- Check all audio input and output connections.
- ຮັບປະກັນ amplifier is powered on and the POWER LED is illuminated.
- Verify that input sources are active and sending a signal.
- Adjust channel gain knobs and master volume on your mixer/preamp.
- ສຽງບິດເບືອນ:
- Check if the LIMIT LED is illuminated; reduce input level if it is.
- ໃຫ້ແນ່ໃຈວ່າ impedance ລໍາໂພງກົງກັບ ampຄວາມສາມາດຂອງ lifier.
- Inspect speaker cables for damage or incorrect wiring.
- Amplifier Enters Protect Mode (PRO LED illuminated):
- ປິດ amplifier ແລະຕັດການເຊື່ອມຕໍ່ລໍາໂພງທັງຫມົດ.
- Check for short circuits in speaker cables or faulty speakers.
- Ensure proper ventilation to prevent overheating. Allow the unit to cool down.
- Verify that the speaker load impedance is within the amplifier's specified range (e.g., not below 2 ohms per channel).
- ສຽງພັດລົມຫຼາຍເກີນໄປ:
- ຮັບປະກັນ amplifier has sufficient airflow and is not in an enclosed space.
- Clean any dust buildup from the fan and ventilation grilles.
8. ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ລາຍລະອຽດ |
|---|---|
| ຊື່ຕົວແບບ | NX1000 |
| ການສົ່ງອອກພະລັງງານ (2 Ohms) | ຂະ ໜາດ 2 x 500 ວັດ |
| ການສົ່ງອອກພະລັງງານ (4 Ohms) | ຂະ ໜາດ 2 x 300 ວັດ |
| Power Output (4 Ohms Bridged) | 1000 ວັດ |
| ນ້ຳໜັກ | 7.3 lbs / 3.3 kg |
| Ampຊັ້ນຊີວິດ | ຫ້ອງຮຽນ -D |
| Loudspeaker Impedance Compensation | SmartSense |
| ຂ້າມ | Built-in stereo (low-cut, high-cut, full range) |
| ການສະຫນອງພະລັງງານ | Ultra-efficient switch-mode |
| ຂະໜາດສິນຄ້າ | 19.02 x 9.09 x 3.7 ນິ້ວ |
| ເຕັກໂນໂລຊີການເຊື່ອມຕໍ່ | ມີສາຍ |
| ຮູບແບບການອອກສຽງ | ສະເຕຣິໂອ |
| ຈໍານວນວົງຈອນ | 2 |
9. ການຮັບປະກັນແລະການສະ ໜັບ ສະ ໜູນ
The Behringer NX1000 amplifier ມາພ້ອມກັບ a ການຮັບປະກັນຈໍາກັດ. For detailed warranty information, product support, or service inquiries, please visit the official Behringer website ຫຼືຕິດຕໍ່ສະຫນັບສະຫນູນລູກຄ້າຂອງເຂົາເຈົ້າໂດຍກົງ.
ໃຫ້ອ້າງອີງເຖິງຊັບພະຍາກອນທາງການຂອງຜູ້ຜະລິດສະເໝີ ສຳລັບຂໍ້ມູນທີ່ຖືກຕ້ອງ ແລະ ທັນສະໄໝທີ່ສຸດກ່ຽວກັບຜະລິດຕະພັນຂອງທ່ານ.
