Audibax Orlando 162 Plus PAR Light User Manual

1. ບົດແນະນຳ

The Audibax Orlando 162 Plus is a professional PAR light designed for various lighting applications. It features 54 x 3W RGB 3-in-1 LEDs, offering a wide range of color mixing capabilities. This device supports DMX control, automatic programs, sound-activated modes, and master/slave operation, making it suitable for stage lighting, events, and architectural illumination. This manual provides essential information for safe operation, setup, and maintenance.

2. ຂໍ້ມູນຄວາມປອດໄພ

• ຄວາມປອດໄພທາງໄຟຟ້າ: Always connect the device to a grounded power outlet. Ensure the voltage matches the device's requirements (AC90-240V, 50/60Hz). Disconnect power before cleaning or servicing.
• ການຈັດວາງ: Install the fixture in a well-ventilated area, away from heat sources and flammable materials. Ensure stable mounting to prevent accidental falls.
• ການຈັດການ: Avoid direct eye exposure to the light source. Do not operate the device if the power cord is damaged. Do not attempt to repair the device yourself; refer servicing to qualified personnel.
• ສະພາບແວດລ້ອມ: This device is intended for indoor use only. Protect it from moisture and extreme temperatures.

3. ເນື້ອໃນຊຸດ

ກວດ​ສອບ​ວ່າ​ລາຍ​ການ​ທັງ​ຫມົດ​ແມ່ນ​ມີ​ຢູ່​ໃນ​ການ​ຍົກ​ເລີກ​ການ​ຫຸ້ມ​ຫໍ່​:

• Audibax Orlando 162 Plus PAR Light
• ວົງເລັບຕິດຕັ້ງ
• ສາຍໄຟ
• ຄູ່ມືຜູ້ໃຊ້

4. ຜະລິດຕະພັນເກີນview

The Audibax Orlando 162 Plus features a robust aluminum housing and an adjustable mounting bracket for versatile positioning.

ຮູບ 4.1: ດ້ານຫນ້າ view of the Audibax Orlando 162 Plus PAR light, showcasing the 54 RGB LEDs illuminated in green.

ຮູບ 4.2: ຂ້າງ view of the PAR light, illustrating the adjustable mounting bracket for flexible installation.

ກະດານຄວບຄຸມແລະການເຊື່ອມຕໍ່

The rear panel provides access to the control interface and input/output connections.

ຮູບ 4.3: ດ້ານຫລັງ view of the PAR light, detailing the DMX IN/OUT ports, power input, digital display, and control buttons (MENU, UP, DOWN, ENTER).

• ຈໍດິຈິຕອນ: ສະແດງໂໝດປັດຈຸບັນ ແລະການຕັ້ງຄ່າພາຣາມິເຕີ.
• ປຸ່ມເມນູ: ນຳທາງຜ່ານຕົວເລືອກເມນູຫຼັກ.
• ປຸ່ມຂຶ້ນ/ລົງ: Adjust parameter values or navigate menu items.
• ປຸ່ມ ENTER: ຢືນຢັນການເລືອກ.
• DMX ເຂົ້າ/ອອກ: 3-pin XLR connectors for DMX signal connection.
• ກຳລັງຢູ່ໃນ: IEC power input for connecting the power cable.

5. ຕັ້ງຄ່າ

5.1 ການຕິດຕັ້ງ

1. Attach the mounting bracket securely to the fixture using the provided screws.
2. Mount the fixture to a truss, ceiling, or stand using appropriate clamps and safety cables (not included). Ensure the mounting surface can support the weight of the fixture.
3. Adjust the angle of the fixture using the bracket's locking knobs.

5.2 ການເຊື່ອມຕໍ່ພະລັງງານ

1. Connect the supplied power cable to the POWER IN socket on the rear of the fixture.
2. Plug the other end of the power cable into a suitable grounded power outlet.

5.3 ການເຊື່ອມຕໍ່ DMX (ທາງເລືອກ)

For DMX control, connect a DMX controller to the DMX IN port of the first fixture. Use DMX OUT to connect to the DMX IN of the next fixture in a daisy chain configuration.

• Use standard 3-pin XLR DMX cables.
• Ensure the DMX chain is terminated with a 120-ohm resistor at the last fixture for optimal signal integrity.

6. ຄໍາແນະນໍາການດໍາເນີນງານ

Use the MENU, UP, DOWN, and ENTER buttons on the rear panel to navigate and select operating modes and parameters.

6.1 ການ ນຳ ທາງເມນູ

• ກົດ ເມນູ to cycle through the main menu options (e.g., DMX Address, Auto Mode, Sound Mode, Master/Slave).
• ໃຊ້ UP ແລະ ລົງ ເພື່ອປັບຄ່າ ຫຼືເລືອກຕົວເລືອກຍ່ອຍພາຍໃນເມນູ.
• ກົດ ປ້ອນ to confirm your selection or save changes.

6.2 ຮູບແບບການໃຊ້ງານ

The Orlando 162 Plus offers several operational modes:

• ໂໝດ DMX: Allows external control via a DMX controller. Set the DMX address using the menu. Refer to the DMX channel chart (not provided in this manual, typically found in a separate DMX protocol sheet) for specific control functions.
• ແບບອັດຕະໂນມັດ: The fixture runs through pre-programmed light shows automatically. Various auto programs may be available; use UP/DOWN to select.
• ໂໝດສຽງເປີດ: The light patterns and changes respond to ambient sound detected by the built-in microphone. Adjust sensitivity if available.
• ຮູບແບບແມ່ບົດ/ສໍາລອງ: Connect multiple Orlando 162 Plus fixtures. Set one unit as 'Master' and others as 'Slave'. The slave units will synchronize their operation with the master unit.
• ໂໝດສີຄົງທີ່: Select a fixed color. The 3-in-1 RGB LEDs allow for a wide spectrum of colors.
• ຟັງຊັນ Strobe: Activates a flashing light effect. This can often be adjusted for speed.

6.3 Color Examples

7. ບໍາລຸງຮັກສາ

• ທໍາຄວາມສະອາດ: Regularly clean the lens and housing with a soft, lint-free cloth. Do not use abrasive cleaners or solvents. Ensure the device is powered off and unplugged before cleaning.
• ການກວດກາ: Periodically check power cables, DMX cables, and mounting hardware for any signs of wear or damage. Replace damaged components immediately.
• ການເກັບຮັກສາ: ເມື່ອບໍ່ໄດ້ໃຊ້ງານ, ໃຫ້ເກັບຮັກສາອຸປະກອນໄວ້ໃນສະພາບແວດລ້ອມແຫ້ງ ແລະ ບໍ່ມີຝຸ່ນ.

8. ການແກ້ໄຂບັນຫາ

9. ຂໍ້ມູນຈໍາເພາະ

10. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

Audibax products are manufactured to high-quality standards. For warranty information, please refer to the terms and conditions provided at the point of purchase or contact Audibax customer support. For technical assistance or service inquiries, please visit the official Audibax webເວັບໄຊທ໌ຫຼືຕິດຕໍ່ຕົວແທນຈໍາຫນ່າຍທ້ອງຖິ່ນຂອງທ່ານ.