ແນະນຳ
This manual provides essential instructions for the setup, operation, and troubleshooting of your Ergomotion E6 Adjustable Bed Replacement Remote Control. Please read this manual thoroughly before use to ensure proper functionality and to maximize the lifespan of your remote.
ຮູບທີ 1: Ergomotion E6 Replacement Remote Control. This image displays the black remote control with various buttons for adjusting head and foot positions, zero gravity, flat, and timer functions. The Ergomotion logo is visible at the bottom left.
ຄວາມຕ້ອງການເຂົ້າກັນໄດ້
This replacement remote is specifically designed for the Ergomotion E6 adjustable bed model. To ensure compatibility:
- Verify that the buttons on this replacement remote exactly match those on your original Ergomotion E6 remote.
- Confirm that your existing remote does ບໍ່ have dip switches numbered one through four or one through six. Remotes with dip switches are not compatible with this model.
- Your original remote (the one being replaced) should have a square rubber 'learn' button located above the AAA batteries behind its battery cover. This indicates compatibility with the bed system this replacement remote is designed for.
If your current remote or bed system does not meet these criteria, this replacement remote will not function correctly with your adjustable bed.
ຄໍາແນະນໍາການຕິດຕັ້ງແລະການຈັບຄູ່
Follow these steps to pair your new Ergomotion E6 replacement remote control with your adjustable bed:
- Locate the Control Box: Identify the control box for your adjustable bed. This is typically found underneath the bed frame.
- Power Cycle (Optional but Recommended): Unplug the adjustable bed from the power outlet for approximately 30 seconds, then plug it back in. This can help reset the system.
- Access the Learn Button: On the control box, locate the square rubber "learn" button. This button is usually small and may be recessed.
- ກົດປຸ່ມຮຽນຮູ້: Press and hold the "learn" button on the control box for approximately 2-3 seconds. The indicator light on the control box should begin to flash.
- ຈັບຄູ່ໄລຍະໄກ: Within 10 seconds of the control box light flashing, press and hold any button on your new replacement remote control.
- ການຢືນຢັນ: The indicator light on the control box should stop flashing and remain solid, or the bed may briefly move, indicating successful pairing.
- ການທໍາງານຂອງການທົດສອບ: Test all functions of the remote control (Head Up/Down, Foot Up/Down, Flat, Zero G, Timer) to ensure proper operation.
If the remote does not pair on the first attempt, repeat the steps. Ensure the remote has fresh AAA batteries installed.
ດໍາເນີນການຄວບຄຸມໄລຍະໄກ
The Ergomotion E6 remote control provides intuitive access to various adjustable bed functions. Refer to the button descriptions below for operation:
- HEAD (Up Arrow): Elevates the head section of the bed.
- HEAD (Down Arrow): ຫຼຸດສ່ວນຫົວຂອງຕຽງ.
- FOOT (Up Arrow): Elevates the foot section of the bed.
- FOOT (Down Arrow): ຫຼຸດສ່ວນຕີນຂອງຕຽງ.
- ປຸ່ມແປ: ສົ່ງຄືນໃຫ້ຕຽງນອນຢູ່ໃນທ່າຮາບພຽງ.
- ZERO G Button: Activates the "Zero Gravity" preset position.
- Preset HEAD Button: Activates a pre-programmed head position.
- Preset FOOT Button: Activates a pre-programmed foot position.
- TIMER/ALL OFF Button: Initiates a timer function or turns off all active bed functions.
- 10 MIN, 20 MIN, 30 MIN Buttons: Activates a timer for the specified duration, after which the bed may adjust or turn off.
- Button with Wave Symbol: Controls a massage or wave function.
- Button with Light Bulb Symbol: Controls an integrated light feature.
Note: Specific button functions may vary slightly depending on the exact model of your Ergomotion adjustable bed.
ການດູແລແລະບໍາລຸງຮັກສາ
To ensure the longevity and optimal performance of your remote control, follow these guidelines:
- ການປ່ຽນແບັດເຕີຣີ: Replace AAA batteries when the remote's response becomes sluggish or stops working. Ensure correct polarity when inserting new batteries.
- ທໍາຄວາມສະອາດ: Wipe the remote with a soft, dry cloth. Avoid using liquid cleaners, aerosols, or harsh chemicals, as these can damage the remote's electronics and finish.
- ການເກັບຮັກສາ: ເກັບຮັກສາຣີໂໝດໄວ້ໃນບ່ອນແຫ້ງ, ຫ່າງຈາກອຸນຫະພູມສູງສຸດ ແລະ ແສງແດດໂດຍກົງ.
- ຫຼີກລ້ຽງການຫຼຸດລົງ: ປົກປ້ອງຣີໂໝດຈາກການຕົກ ແລະ ການກະທົບ, ເຊິ່ງສາມາດເຮັດໃຫ້ເກີດຄວາມເສຍຫາຍພາຍໃນໄດ້.
ການແກ້ໄຂບັນຫາ
If you experience issues with your Ergomotion E6 replacement remote, consult the following troubleshooting steps:
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ໄລຍະໄກບໍ່ຕອບສະຫນອງ. | Dead or incorrectly inserted batteries. Remote not paired. | Replace batteries with fresh AAA batteries, ensuring correct polarity. Re-attempt the pairing process as described in the "Setup and Pairing Instructions" section. |
| Bed does not move after pairing. | Incorrect remote model. Interference. | Verify that this remote is the correct model (E6) and that its buttons match your original remote. Ensure no other devices are interfering with the signal. Try unplugging the bed for 30 seconds and re-pairing. |
| ໄລຍະໄກເຮັດວຽກເປັນໄລຍະໆ. | Low batteries. Signal obstruction. | Replace batteries. Ensure a clear line of sight between the remote and the bed's control box. |
| Remote has dip switches. | Incompatible remote model. | This E6 remote is not compatible with beds that use remotes with dip switches (numbered 1-4 or 1-6). You will need a different replacement remote. |
If you continue to experience issues after following these steps, please contact Ergomotion customer support for further assistance.
ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ລາຍລະອຽດ |
|---|---|
| ໝາຍເລກຕົວແບບ | E6 |
| ຍີ່ຫໍ້ | Ergomotion Adjustable Bed Remotes |
| ອຸປະກອນທີ່ເຂົ້າກັນໄດ້ | Ergomotion E6 Adjustable Beds |
| ຈຳນວນສູງສຸດຂອງອຸປະກອນທີ່ຮອງຮັບ | 1 (Single adjustable bed) |
| ສີ | ດຳ |
| ຄຸນນະສົມບັດພິເສດ | ການອອກແບບ Ergonomic |
| ແຫຼ່ງພະລັງງານ | ແບດເຕີຣີ້ AAA (ບໍ່ລວມ) |
| ວັນທີທໍາອິດທີ່ມີ | ວັນທີ 30 ມິຖຸນາ 2018 |
ການຊ່ວຍເຫຼືອລູກຄ້າ
For further assistance, questions, or to report issues not covered in this manual, please contact Ergomotion customer support. Providing your product model (E6) and a detailed description of the issue will help expedite support.
Note: Contacting the seller directly with compatibility questions before purchase can help avoid restocking fees if the remote is incompatible.
