1. ບົດແນະນຳ
This manual provides essential information for the safe and effective operation of the Mark-10 EKM5-200 Myometer Kit. The EKM5-200 Myometer Kit is designed to facilitate a wide range of strength assessments and ergonomics studies. It features a Series 5 force gauge with a 200 lbF (1,000 N) range, a tabletop mount, a strap, and various accessories. This kit is suitable for ergonomists and other professionals requiring precise force measurement.
2. ຂໍ້ມູນຄວາມປອດໄພ
Please read all instructions carefully before using the EKM5-200 Myometer Kit. Failure to follow these instructions may result in injury or damage to the equipment.
- Ensure the device is used within its specified force capacity of 200 lbF (1,000 N). Exceeding this limit can damage the force gauge.
- Only use the provided AC adapter/charger for powering and charging the device.
- ເກັບຮັກສາອຸປະກອນໃຫ້ຫ່າງຈາກຂອງແຫຼວ ແລະ ອຸນຫະພູມສູງ ຫຼື ຕ່ຳ.
- ຢ່າພະຍາຍາມຖອດປະກອບ ຫຼືສ້ອມແປງອຸປະກອນ. ອ້າງອີງການບໍລິການທັງໝົດໃຫ້ກັບບຸກຄະລາກອນທີ່ມີຄຸນວຸດທິ.
- Always secure the force gauge properly when using the tabletop mounting kit to prevent accidental detachment.
- When performing strength assessments, ensure the subject is positioned safely and comfortably.
3. ເນື້ອໃນຊຸດ
The Mark-10 EKM5-200 Myometer Kit includes the following components:
- M5-200 Advanced Force Gauge
- ກະເປົາຖື
- Tabletop Mounting Kit (for vertical or horizontal orientations)
- Adjustable Length Looped Strap
- AC Adapter/Charger (110V)
- MESUR Lite Data Collection Software
- ສາຍ USB
- NIST-traceable Certificate of Calibration with Data
Figure 1: The M5-200 Advanced Force Gauge, a key component of the EKM5-200 kit. It features a digital display and control buttons.
4. ຜະລິດຕະພັນເກີນview ແລະຄຸນສົມບັດ
The EKM5-200 Myometer Kit is designed for precise force measurement in various applications. Its core component, the M5-200 force gauge, offers advanced capabilities.
ຄຸນນະສົມບັດທີ່ສໍາຄັນ:
- Measures real-time, average, and peak pull and push forces.
- Force capacity: 200 lbF (1,000 N).
- Accuracy: ±0.1% of full scale.
- Sampling rate: 7,000 Hz.
- Output options: USB, RS-232, and analog.
- High/low limit indicators for pass/fail and minimum force testing.
- 1,000-point data memory with statistical calculations.
- Data can be bulk downloaded to the included MESUR Lite data collection software.
- Force gauge is compatible with other Mark-10 grips and attachments.
5. ຕັ້ງຄ່າ
5.1 Charging the Force Gauge
- Connect the AC adapter/charger to the force gauge's power input port.
- Plug the AC adapter into a standard 110V electrical outlet.
- Allow the device to charge fully before initial use. The charging indicator on the gauge will provide status.
5.2 Assembling the Tabletop Mounting Kit
- Identify the components of the tabletop mounting kit.
- Attach the force gauge securely to the mounting bracket. Ensure all fasteners are tightened.
- Mount the assembly to a stable tabletop or surface, ensuring it is firm and does not wobble. The kit supports both vertical and horizontal orientations.
- Attach the adjustable length looped strap to the force gauge or an appropriate attachment point on the mounting kit, depending on the test setup.
ຮູບທີ 2: ຕົວຢ່າງample setup of the EKM5-200 Myometer Kit for an ergonomics study, showing the force gauge mounted on a table and connected to a subject via a strap.
6. ຄໍາແນະນໍາການດໍາເນີນງານ
6.1 ການເປີດ/ປິດ
- ເພື່ອເປີດເຄື່ອງ, ກົດປຸ່ມຄ້າງໄວ້ ພະລັງງານ ກົດປຸ່ມຈົນກວ່າຈໍສະແດງຜົນຈະສະຫວ່າງ.
- ເພື່ອປິດໄຟ, ກົດປຸ່ມແລະກົດປຸ່ມ ພະລັງງານ ກົດປຸ່ມຈົນກ່ວາຈໍສະແດງຜົນປິດ.
6.2 ການວັດແທກພື້ນຖານ
- Ensure the force gauge is powered on and properly calibrated (refer to NIST certificate).
- ກົດ ZERO button to tare the current reading before applying any force.
- Apply force to the sensor via the strap or other attachment. The display will show the real-time force.
- The gauge can display peak force, average force, and real-time force. Use the ໂໝດ button to cycle through display modes.
- Observe the high/low limit indicators for pass/fail testing, if configured.
6.3 ການເລືອກຫົວ ໜ່ວຍ
ກົດ ໜ່ວຍ button to cycle through available measurement units (e.g., lbF, N, kgF).
7. ການຄຸ້ມຄອງຂໍ້ມູນ
7.1 Internal Data Memory
The M5-200 force gauge can store up to 1,000 data points internally, along with statistical calculations. Refer to the force gauge's dedicated manual for detailed instructions on saving and reviewing data directly on the device.
7.2 MESUR Lite Data Collection Software
- Install the MESUR Lite data collection software on your computer using the provided media or by downloading it from the Mark-10 webເວັບໄຊ.
- Connect the force gauge to your computer using the supplied USB cable.
- Launch the MESUR Lite software. The software will detect the connected force gauge.
- Follow the on-screen instructions within MESUR Lite to bulk download stored data, perform real-time data acquisition, and analyze measurements.
8. ບໍາລຸງຮັກສາ
8.1 ການທໍາຄວາມສະອາດ
- Wipe the exterior of the force gauge and accessories with a soft, damp ຜ້າ.
- ຢ່າໃຊ້ນໍ້າຢາທໍາຄວາມສະອາດທີ່ມີສີຂັດ ຫຼື ຕົວລະລາຍ, ເພາະວ່າສິ່ງເຫຼົ່ານີ້ອາດຈະທໍາລາຍຊັ້ນເຄືອບ ຫຼື ອົງປະກອບພາຍໃນໄດ້.
- Ensure no moisture enters the device's ports.
8.2 ການເກັບຮັກສາ
- When not in use, store the EKM5-200 Myometer Kit in its provided carrying case to protect it from dust, impacts, and environmental factors.
- ເກັບຮັກສາໄວ້ໃນບ່ອນທີ່ເຢັນ, ແຫ້ງ, ຫ່າງຈາກແສງແດດໂດຍກົງແລະອຸນຫະພູມທີ່ສຸດ.
8.3 ການປັບທຽບ
The force gauge comes with a NIST-traceable certificate of calibration. Regular recalibration is recommended to maintain accuracy, especially for critical applications. Refer to Mark-10's guidelines or contact their support for recalibration services.
9. ການແກ້ໄຂບັນຫາ
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ອຸປະກອນບໍ່ເປີດ. | ບັນຫາແບັດເຕີລີໜ້ອຍ ຫຼືຕົວແປງໄຟ. | Connect the AC adapter and charge the device. Ensure the adapter is properly plugged into a working outlet. |
| ການອ່ານບໍ່ຖືກຕ້ອງ. | Not zeroed before use, or device requires recalibration. | ກົດ ZERO button before measurement. If problem persists, consider recalibration. |
| Cannot connect to MESUR Lite software. | USB cable issue, driver not installed, or software not running. | Ensure USB cable is securely connected. Install necessary drivers. Restart MESUR Lite software and the force gauge. |
| ຈໍສະແດງຜົນສະແດງໃຫ້ເຫັນວ່າ "OVERLOAD". | Applied force exceeds the device's capacity. | Immediately remove the excessive force. Ensure future measurements stay within the 200 lbF (1,000 N) limit. |
If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact Mark-10 technical support.
10. ຂໍ້ມູນຈໍາເພາະ
| ພາລາມິເຕີ | ມູນຄ່າ |
|---|---|
| ຕົວແບບ | EKM5-200 |
| ຄວາມອາດສາມາດບັງຄັບ | 200 lbF (1,000 N) |
| ຄວາມຖືກຕ້ອງ | ±0.1% ຂອງຂະຫນາດເຕັມ |
| Sampອັດຕາການລິງ | 7,000 Hz |
| ຂໍ້ມູນຄວາມ ຈຳ | 1,000 ຈຸດຂໍ້ມູນ |
| ຜົນໄດ້ຮັບ | USB, RS-232, Analog |
| ການປ້ອນຂໍ້ມູນພະລັງງານ | ອະແດບເຕີ AC 110V |
| ຜູ້ຜະລິດ | ມາກ-10 |
| ASIN | B07D8SFSKC |
| UPC | 666758807621 |
11. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
11.1 ຂໍ້ມູນການຮັບປະກັນ
For detailed warranty information regarding your Mark-10 EKM5-200 Myometer Kit, please refer to the documentation included with your purchase or visit the official Mark-10 webເວັບໄຊ. ເງື່ອນໄຂການຮັບປະກັນໂດຍປົກກະຕິກວມເອົາຂໍ້ບົກພ່ອງການຜະລິດສໍາລັບໄລຍະເວລາທີ່ກໍານົດໄວ້ຈາກວັນທີຊື້.
11.2 ສະຫນັບສະຫນູນດ້ານວິຊາການ
Should you require technical assistance, troubleshooting, or service for your EKM5-200 Myometer Kit, please contact Mark-10 customer support.
- ຜູ້ຜະລິດ: ມາກ-10
- Webເວັບໄຊ: www.mark-10.com (ກະລຸນາຢ້ຽມຊົມທາງການ website for contact details and the latest support resources.)
When contacting support, please have your model number (EKM5-200) and serial number (if applicable) ready.
