ຄູ່ມືການໃຊ້ເຄື່ອງສະແກນເອກະສານ Fujitsu FS-6160ZLA

ແນະນຳ

This manual provides essential instructions for the safe and efficient operation of your Fujitsu FS-6160ZLA Document Scanner. Please read this manual thoroughly before using the scanner and retain it for future reference. Following these guidelines will ensure optimal performance and longevity of your device.

ສິນຄ້າເກີນview

The Fujitsu FS-6160ZLA is a high-performance document scanner designed for efficient paper handling and digital conversion. It features an Automatic Document Feeder (ADF) for batch scanning and a user-friendly control panel.

ຮູບທີ 1: ດ້ານໜ້າ view of the Fujitsu fi-6130 document scanner, showing the automatic document feeder (ADF) input tray at the top, the control panel on the right, and the output tray at the bottom. The scanner is white and black.

ອົງ​ປະ​ກອບ​ທີ່​ສໍາ​ຄັນ​:

• ຕົວປ້ອນເອກະສານອັດຕະໂນມັດ (ADF): For loading multiple documents for continuous scanning.
• ກະດານຄວບຄຸມ: Buttons for various functions including power, scan, and job selection.
• ຖາດປ້ອນຂໍ້ມູນ: ເກັບກຳເອກະສານທີ່ສະແກນແລ້ວ.
• USB/Power Ports: Located at the rear for connectivity and power supply.

ຕັ້ງຄ່າ

1. ການຫຸ້ມຫໍ່: Carefully remove the scanner and all accessories from the packaging. Ensure all components are present: scanner unit, AC adapter, USB cable, and software CD/DVD (if included).
2. ການຈັດວາງ: Place the scanner on a stable, flat surface with adequate space for document feeding and output. Ensure proper ventilation.
3. ເຊື່ອມຕໍ່ພະລັງງານ: Connect the AC adapter to the scanner's power input and then plug it into a wall outlet.
4. ເຊື່ອມ​ຕໍ່​ກັບ​ຄອມ​ພິວ​ເຕີ​:
   • ການເຊື່ອມຕໍ່ USB: Connect one end of the USB cable to the scanner's USB port and the other end to an available USB port on your computer.
   • ການເຊື່ອມຕໍ່ Wi-Fi: Refer to the separate network setup guide or the scanner's display (if applicable) for instructions on connecting to your wireless network.
5. ການຕິດຕັ້ງຊອບແວ: Insert the provided software CD/DVD into your computer's drive, or download the latest drivers and scanning software from the official Fujitsu support webເວັບໄຊ. ປະຕິບັດຕາມຄໍາແນະນໍາໃນຫນ້າຈໍເພື່ອສໍາເລັດການຕິດຕັ້ງ.

ຄໍາແນະນໍາການດໍາເນີນງານ

1. ເປີດ: ກົດ ພະລັງງານ button on the control panel to turn on the scanner. Wait for the scanner to initialize.
2. ໂຫຼດເອກະສານ:
   • Fan the stack of documents to separate pages and align edges.
   • Place documents face-down in the Automatic Document Feeder (ADF) input tray. Adjust the side guides to fit the width of your documents.
   • Ensure documents are within supported sizes (e.g., A4, A5, B5, Letter, Legal).
3. ເລືອກການຕັ້ງຄ່າການສະແກນ: Open your scanning software on the computer. Select the desired scan profile, resolution, color mode (e.g., color, grayscale, black & white), and destination folder.
4. ເລີ່ມການສະແກນ:
   • ກົດ ສະແກນ/ຢຸດ button on the scanner's control panel, or initiate the scan from your computer software.
   • The scanner will feed and scan the documents.
5. Review ແລະ ບັນທຶກ: ຫຼັງຈາກສະແກນແລ້ວ, ໃຫ້ເປີດຄືນໃໝ່view the digitized images on your computer. Save them to your preferred location and format.
6. ຟັງຊັນແຜງຄວບຄຸມ:
   • ກວດສອບ: Verifies scanner status or settings.
   • ຟັງຊັນ: Cycles through predefined scan jobs or settings.
   • ສົ່ງໄປທີ່: Directs scanned documents to a specific application or destination.
   • Scan/Stop: Starts or stops the scanning process.
   • ພະລັງງານ: ເປີດ ຫຼືປິດເຄື່ອງສະແກນ.

ບໍາລຸງຮັກສາ

Regular maintenance ensures consistent scan quality and extends the life of your scanner.

• ການເຮັດຄວາມສະອາດລູກກິ້ງ:
  • ປິດ ແລະຖອດເຄື່ອງສະແກນອອກ.
  • Open the scanner cover to access the feed rollers.
  • Gently wipe the rollers with a lint-free cloth dampened with isopropyl alcohol or a specialized roller cleaner. Allow to dry completely before closing the cover.
• ທໍາ​ຄວາມ​ສະ​ອາດ​ແກ້ວ:
  • Locate the glass scanning surface inside the scanner.
  • ໃຊ້ຜ້າແພທີ່ອ່ອນນຸ້ມ ງampened with glass cleaner (non-abrasive) to clean the glass. Avoid spraying cleaner directly onto the glass.
• ການອະນາໄມພາຍນອກ: Wipe the exterior of the scanner with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• ເຄື່ອງບໍລິໂພກ: Periodically check the condition of feed rollers and separation pads. Replace them as recommended by Fujitsu to maintain optimal performance. Refer to the Fujitsu support webສະຖານທີ່ສໍາລັບຂໍ້ມູນສ່ວນທົດແທນ.

ການແກ້ໄຂບັນຫາ

This section addresses common issues you might encounter with your Fujitsu FS-6160ZLA scanner.

• ເຄື່ອງສະແກນບໍ່ໄດ້ເປີດ:
  • Ensure the power cable is securely connected to both the scanner and a working power outlet.
  • ກວດ​ສອບ​ວ່າ​ອະ​ແດັບ​ເຕີ​ໄຟ​ເຮັດ​ວຽກ​ຖືກ​ຕ້ອງ​.
• Documents Jamming:
  • Remove all jammed documents carefully, following the scanner's internal guides.
  • Ensure documents are properly fanned and aligned in the ADF.
  • Check for worn-out feed rollers or separation pads and replace if necessary.
  • Avoid loading creased, stapled, or damaged documents.
• Poor Scan Quality (Streaks, Blurs, Dots):
  • Clean the glass scanning surface and feed rollers as described in the Maintenance section.
  • Adjust scan settings (e.g., resolution, brightness) in your scanning software.
  • Ensure documents are clean and free of debris.
• Scanner Not Detected by Computer:
  • Verify the USB or Wi-Fi connection is secure and active.
  • ຣີສະຕາດທັງເຄື່ອງສະແກນ ແລະຄອມພິວເຕີຂອງທ່ານ.
  • Reinstall the scanner drivers and software.
  • ລອງໃຊ້ພອດ USB ຫຼືສາຍອື່ນ.

ຂໍ້ມູນຈໍາເພາະ

ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For detailed warranty information, technical support, or to purchase replacement parts and consumables, please visit the official Fujitsu website or contact your local Fujitsu service provider. Keep your purchase receipt as proof of purchase for warranty claims.

ຊັບພະຍາກອນອອນໄລນ໌:

• Fujitsu Global Support
• Fujitsu Scanners Product Page