1. ບົດແນະນຳ
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your TEXAS XC 160-108H Ride-On Mower. Please read this manual thoroughly before operating the machine to ensure proper use and to prevent injury or damage.
ຮູບ 1.1: ເກີນview of the TEXAS XC 160-108H Ride-On Mower. This image shows the complete ride-on mower from a front-left angle, highlighting its compact design, large wheels, and the cutting deck.
2. ຄໍາແນະນໍາຄວາມປອດໄພ
Always prioritize safety when operating the ride-on mower. Failure to follow these instructions can result in serious injury or death.
- ອ່ານແລະເຂົ້າໃຈຄໍາແນະນໍາທັງຫມົດກ່ອນທີ່ຈະດໍາເນີນການເຄື່ອງຈັກ.
- ຮັກສາເດັກນ້ອຍ ແລະສັດລ້ຽງຢູ່ຫ່າງຈາກພື້ນທີ່ປະຕິບັດງານ.
- ໃສ່ອຸປະກອນປ້ອງກັນສ່ວນບຸກຄົນທີ່ເຫມາະສົມ (PPE), ລວມທັງການປ້ອງກັນຕາ, ການປ້ອງກັນການໄດ້ຍິນ, ແລະເກີບເກີບທີ່ທົນທານ.
- ຢ່າໃຊ້ເຄື່ອງຕັດຫຍ້າໃນຂະນະທີ່ມີເຫຼົ້າ ຫຼື ຢາເສບຕິດ.
- ກວດເບິ່ງພື້ນທີ່ສໍາລັບ debis ກ່ອນທີ່ຈະ mowing.
- ຢ່າປະຕິບັດງານຢູ່ເທິງເນີນພູທີ່ຊັນເກີນໄປ.
- Turn off the engine and remove the key before performing any maintenance or clearing blockages.
3. ການຕິດຕັ້ງແລະການປະກອບ
Your TEXAS XC 160-108H Ride-On Mower may require some assembly upon delivery. Follow these steps carefully.
- ການຫຸ້ມຫໍ່: Carefully remove all components from the packaging. Check for any shipping damage.
- ການຕິດຕັ້ງພວງມາໄລ: Attach the steering wheel to the steering column, ensuring it is securely fastened.
- ການຕິດຕັ້ງບ່ອນນັ່ງ: Mount the operator's seat onto the designated frame, securing it with the provided hardware.
- ການເຊື່ອມຕໍ່ຫມໍ້ໄຟ: Connect the battery terminals, ensuring correct polarity (red to positive, black to negative).
- ກວດເຊັກນໍ້າ: Before first use, check engine oil level and fuel level. Refer to the "Specifications" section for recommended fluid types and capacities.
ຮູບ 3.1: ເທິງລົງລຸ່ມ view of the operator's station, showing the steering wheel, seat, and control levers. This image helps in identifying key controls during setup and operation.
4. ຄໍາແນະນໍາການດໍາເນີນງານ
Familiarize yourself with the controls and operating procedures before starting the engine.
4.1. ລາຍການກວດສອບກ່ອນການດຳເນີນງານ
- ກວດເບິ່ງລະດັບນໍ້າມັນເຄື່ອງ.
- Ensure fuel tank is adequately filled with gasoline.
- ກວດສອບຢາງລົດເພື່ອເບິ່ງວ່າລົມຢາງພຽງພໍຫຼືບໍ່.
- Verify cutting deck is clear of debris.
- Adjust seat for comfortable operation.
4.2. ການເລີ່ມຕົ້ນເຄື່ອງຈັກ
- ໃຫ້ແນ່ໃຈວ່າເບກບ່ອນຈອດລົດຕິດຢູ່.
- Place the cutting deck engagement lever in the "disengaged" position.
- ໃສ່ກະແຈເຂົ້າໄປໃນສະວິດໄຟ.
- Turn the key to the "START" position. The 12V electric start system will engage the engine.
- ເມື່ອເຄື່ອງຈັກສະຕາດແລ້ວ, ໃຫ້ປ່ອຍກະແຈ.
4.3. Mowing Operation
- ການປັບຄວາມສູງຂອງການຕັດ: Use the 7-fold central adjustment lever to set the desired cutting height between 30 mm and 90 mm.
- ການຄວບຄຸມຄວາມໄວ: The hydrostatic transmission allows for stepless speed adjustment from 0 to 8.8 km/h using the foot pedal.
- ການໄຫຼອອກຂ້າງຄຽງ: The mower features a side discharge chute for efficient grass dispersal. Ensure the chute is clear during operation.
Figure 4.1: Detail of the side discharge chute. This component directs cut grass away from the mower, preventing clumping and ensuring a clean cut.
5. ບໍາລຸງຮັກສາ
Regular maintenance is crucial for the longevity and optimal performance of your ride-on mower.
5.1. ການບຳລຸງຮັກສາເຄື່ອງຈັກ
- ປ່ຽນນ້ຳມັນ: Change engine oil (SAE 30) after the first 5 hours of operation, then every 25 hours or annually.
- ການກັ່ນຕອງອາກາດ: ທຳຄວາມສະອາດ ຫຼື ປ່ຽນໄສ້ກອງອາກາດເປັນປະຈຳ, ໂດຍສະເພາະໃນສະພາບທີ່ມີຝຸ່ນຫຼາຍ.
- ປລັກສຽບໄຟ: ກວດສອບ ແລະ ທຳຄວາມສະອາດຫົວທຽນທຸກໆປີ. ປ່ຽນໃໝ່ຖ້າມັນເສື່ອມສະພາບ.
5.2. Cutting Deck and Blades
- ການລັບໃບມີດ/ການປ່ຽນແທນ: Sharpen or replace blades as needed to ensure a clean cut. Always wear gloves when handling blades.
- ການເຮັດຄວາມສະອາດລະບຽງ: ທຳຄວາມສະອາດດ້ານລຸ່ມຂອງແຜ່ນຕັດຫຼັງຈາກການນຳໃຊ້ແຕ່ລະຄັ້ງເພື່ອປ້ອງກັນການສະສົມຂອງຫຍ້າ.
5.3. ບໍາລຸງຮັກສາທົ່ວໄປ
- ຄວາມດັນຢາງລົດ: ກວດເບິ່ງຄວາມດັນຢາງລົດເປັນປົກກະຕິ.
- ການລະບາຍສີ: Lubricate all moving parts as indicated in the service diagram (not provided, but a general instruction).
- ການເກັບຮັກສາ: Store the mower in a dry, protected area when not in use.
6. ການແກ້ໄຂບັນຫາ
ພາກນີ້ສະຫນອງການແກ້ໄຂບັນຫາທົ່ວໄປທີ່ທ່ານອາດຈະພົບ.
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ເຄື່ອງຈັກບໍ່ເລີ່ມຕົ້ນ | No fuel; Dead battery; Spark plug issue; Safety switch engaged | Add fuel; Charge/replace battery; Check/replace spark plug; Ensure parking brake is on and deck is disengaged |
| ປະສິດທິພາບການຕັດບໍ່ດີ | Dull blades; Deck clogged; Incorrect cutting height | Sharpen/replace blades; Clean deck; Adjust cutting height |
| ເຄື່ອງຕັດຫຍ້າສັ່ນແຮງຫຼາຍ | Bent blade; Loose components | ກວດກາ / ທົດແທນໃບມີດ; Tighten fasteners ທັງຫມົດ |
7. ຂໍ້ມູນຈໍາເພາະ
Detailed technical specifications for the TEXAS XC 160-108H Ride-On Mower.
| ຄຸນສົມບັດ | ຂໍ້ມູນຈໍາເພາະ |
|---|---|
| ຕົວແບບ | XC 160-108H (90063131) |
| ປະເພດເຄື່ອງຈັກ | Loncin 4-Stroke |
| ການຍົກຍ້າຍ | 452 ຊຕມ |
| ຜົນຜະລິດພະລັງງານ | 9.2 kW / 12.5 PS |
| ປະເພດນໍ້າມັນເຊື້ອໄຟ | ນ້ຳມັນເຊື້ອໄຟ |
| ປະລິມານຖັງນໍ້າມັນ | 7.5 ລິດ |
| ປະເພດນ້ຳມັນເຄື່ອງ | SAE 30 |
| ປະລິມານນໍ້າມັນເຄື່ອງ | 1.2 ລິດ |
| ຄວາມກວ້າງຂອງການຕັດ | 108 ຊຕມ |
| ຕັດຄວາມສູງປັບ | 7-fold, 30 - 90 mm |
| ຜູ້ເລີ່ມຕົ້ນ | 12V Electric Start |
| ການສົ່ງຜ່ານ | Hydrostatic (American Hydro-Gear) |
| ຊ່ວງຄວາມໄວ | 0 - 8.8 ກິໂລແມັດຕໍ່ຊົ່ວໂມງ |
| ວົງວຽນ | 45 ຊຕມ |
| Tire Size (Front/Rear) | Front: 15", Rear: 18" (Pneumatic) |
| ວັດສະດຸທີ່ຢູ່ອາໄສ | ເຫຼັກກ້າ |
| ລະດັບພະລັງງານສຽງ | 100 dB(A) |
| ຂະໜາດ (L x W x H) | 173ຊມ x 132ຊມ x 105ຊມ |
| ນ້ຳໜັກ | 170 ກິໂລ |
8. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
For warranty information and customer support, please refer to the documentation provided with your purchase or contact Texas customer service directly. Warranty terms typically cover manufacturing defects for a specified period from the date of purchase.
For further assistance, visit the official Texas webເວັບໄຊ ຫຼືຕິດຕໍ່ສູນບໍລິການທີ່ໄດ້ຮັບອະນຸຍາດຂອງເຂົາເຈົ້າ.
