1. ເກີນview
This manual provides instructions for the Feit Electric A19 LED Light Bulbs, model A800/830/10KLED/10/RP. These bulbs are designed to offer energy-efficient lighting for various residential and commercial applications. They provide 800 lumens of 2700K Soft White light, equivalent to a standard 60-watt incandescent bulb, while consuming only 10 watts of power.
ຄຸນນະສົມບັດທີ່ສໍາຄັນ:
- ການປະຫຍັດພະລັງງານ: Replaces 60W incandescent bulbs with 10W LED, offering up to 83% energy savings.
- ທົນທານ: Designed for an average life of 11,000 hours (approximately 10 years), reducing the frequency of bulb replacements.
- ແສງສີຂາວອ່ອນ: Produces a 2700K color temperature, ideal for creating a warm and inviting atmosphere.
- ໃນທັນທີ: Provides full brightness immediately upon activation, with no warm-up time.
- ຄຸນນະພາບແລະຄວາມປອດໄພ: UL ລະບຸໄວ້ແລະປະຕິບັດຕາມ FCC, ຮັບປະກັນມາດຕະຖານສູງສໍາລັບການປະຕິບັດແລະຄວາມປອດໄພ.
Figure 1: Feit Electric A19 LED Light Bulbs (10-pack packaging).
2. ຂໍ້ມູນຄວາມປອດໄພ
ກະລຸນາອ່ານແລະເຂົ້າໃຈຄໍາແນະນໍາດ້ານຄວາມປອດໄພທັງຫມົດກ່ອນທີ່ຈະຕິດຕັ້ງຫຼືນໍາໃຊ້ຫລອດໄຟ LED ເຫຼົ່ານີ້. ການບໍ່ປະຕິບັດຕາມຄໍາແນະນໍາເຫຼົ່ານີ້ອາດຈະເຮັດໃຫ້ໄຟຟ້າຊ໊ອກ, ໄຟໄຫມ້, ຫຼືອັນຕະລາຍອື່ນໆ.
- ຄວາມສ່ຽງຂອງການຊ໊ອກໄຟຟ້າ: Always turn off the power to the fixture before inspecting, installing, or removing the bulb.
- ບໍ່ສາມາດ Dimmable: ຫລອດໄຟເຫຼົ່ານີ້ແມ່ນ ບໍ່ແມ່ນ designed for use with dimmers. Using them with a dimmer switch may cause flickering, damage to the bulb, or premature failure.
- ເຫມາະສໍາລັບ Damp ສະຖານທີ່: These bulbs are suitable for use in damp ສະຖານທີ່, ແຕ່ບໍ່ແມ່ນສໍາລັບການສໍາຜັດໂດຍກົງກັບນ້ໍາ.
- ອຸນຫະພູມປະຕິບັດການ: Do not use in totally enclosed luminaires unless the fixture is specifically designed for LED bulbs. Excessive heat can shorten bulb life.
- ບໍ່ມີສານ Mercury: These bulbs are 100% mercury-free.
- UL ລາຍຊື່: This product is UL listed, indicating compliance with safety standards.
3. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ
Installation of the Feit Electric A19 LED Light Bulb is straightforward. Ensure the power is off before proceeding.
- ປິດໄຟ: ຊອກຫາສະວິດໄຟ ຫຼື ເບຣກເກີທີ່ຄວບຄຸມອຸປະກອນ ແລະ ປິດໄຟ.
- ເອົາດອກໄຟເກົ່າອອກ: ຄ່ອຍໆຖອດຫລອດໄຟອອກຈາກໂຄມໄຟ. ປະໄວ້ໃຫ້ມັນເຢັນລົງຖ້າມັນຫາກໍ່ໃຊ້ງານມາໄດ້ບໍ່ດົນ.
- ຕິດຕັ້ງດອກໄຟໃໝ່: Screw the Feit Electric A19 LED bulb into the standard E26 medium base socket. Turn clockwise until it is finger-tight. Do not overtighten.
- ຟື້ນຟູພະລັງງານ: ເປີດໄຟຄືນຢູ່ທີ່ສະວິດ ຫຼືຕົວຕັດວົງຈອນ.
- ການທົດສອບ: ເປີດສະວິດໄຟເພື່ອຮັບປະກັນວ່າຫລອດໄຟເຮັດວຽກຢ່າງຖືກຕ້ອງ.
Figure 2: A19 LED Bulb dimensions and base type (E26 Medium).
4. ການດໍາເນີນງານ
The Feit Electric A19 LED Light Bulb operates like a standard light bulb. Once installed and power is restored, simply use the wall switch or fixture switch to turn the light on or off.
- ຄວາມສະຫວ່າງທັນທີ: The bulb will illuminate to full brightness immediately without any delay.
- ແສງອອກ: Provides 800 lumens of light, suitable for general room illumination.
- ອຸນຫະພູມສີ: Emits a 2700K Soft White light, creating a warm and comfortable ambiance.
- ບໍ່ສາມາດ Dimmable: This bulb is not compatible with dimmer switches. Ensure it is used in a non-dimmable circuit.
Figure 3: Illustration of the bulb's light output in a room setting.
5. ບໍາລຸງຮັກສາ
Feit Electric A19 LED Light Bulbs require minimal maintenance due to their long lifespan and durable design.
- ທໍາຄວາມສະອາດ: ເພື່ອເຮັດຄວາມສະອາດຫລອດໄຟ, ໃຫ້ແນ່ໃຈວ່າໄຟປິດຢູ່ ແລະ ຫລອດໄຟເຢັນລົງ. ເຊັດດ້ວຍຜ້າອ່ອນໆແຫ້ງ. ຢ່າໃຊ້ນໍ້າຢາເຮັດຄວາມສະອາດ ຫຼື ວັດສະດຸຂັດ.
- ບໍ່ມີສ່ວນທີ່ຜູ້ໃຊ້ບໍລິການ: ຫລອດໄຟບໍ່ມີຊິ້ນສ່ວນໃດໆທີ່ຜູ້ໃຊ້ສາມາດສ້ອມແປງໄດ້. ຢ່າພະຍາຍາມເປີດ ຫຼື ສ້ອມແປງຫລອດໄຟ.
- ການຖິ້ມຂີ້ເຫຍື້ອ: Dispose of old bulbs according to local regulations for electronic waste.
6. ການແກ້ໄຂບັນຫາ
If you encounter issues with your Feit Electric A19 LED Light Bulb, refer to the following common problems and solutions:
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| Bulb ບໍ່ສະຫວ່າງ. | ບໍ່ມີໄຟຕໍ່ກັບອຸປະກອນ, ການເຊື່ອມຕໍ່ວ່າງ, ຫຼື bulb ຜິດພາດ. | Check if the light switch is on. Ensure the bulb is securely screwed into the socket. Check the circuit breaker. If issues persist, replace the bulb. |
| ດອກໄຟ flickers. | ສະວິດດິມເມີບໍ່ເຂົ້າກັນ ຫຼື ການສະໜອງພະລັງງານທີ່ບໍ່ໝັ້ນຄົງ. | Ensure the bulb is not connected to a dimmer switch, as it is non-dimmable. Check for loose wiring in the fixture. |
| ດອກໄຟອ່ອນເກີນໄປ. | Incorrect bulb for desired brightness. | Verify the bulb's lumen output (800 lumens for this model) meets your lighting needs. |
Figure 4: Feit Electric LED bulbs are designed for flicker-free operation in compatible fixtures.
7. ຂໍ້ມູນຈໍາເພາະ
Detailed technical specifications for the Feit Electric A19 LED Light Bulb (Model: A800/830/10KLED/10/RP):
| ຂໍ້ມູນຈໍາເພາະ | ມູນຄ່າ |
|---|---|
| ໝາຍເລກຕົວແບບ | A800/830/10KLED/10/RP |
| ຂະໜາດຮູບຮ່າງຂອງດອກໄຟ | A19 |
| Bulb Base | E26 ຂະຫນາດກາງ |
| ປະເພດແສງສະຫວ່າງ | LED |
| ວັດtage | 10 ວັດ |
| Incandescent ທຽບເທົ່າ | 60 ວັດ |
| ຄວາມສະຫວ່າງ | 800 Lumens |
| ສີອ່ອນ | ສີຂາວອ່ອນ 2700K |
| ດັດຊະນີການສະແດງສີ (CRI) | 80 |
| ສະບັບtage | 110-120 ໂວນ |
| ຊີວິດສະເລ່ຍ | 11,000 ຊົ່ວໂມງ / 10 ປີ |
| ຄຸນນະສົມບັດພິເສດ | Non Dimmable, Mercury Free, Instant On, UL Listed, FCC Compliant |
| ການນຳໃຊ້ພາຍໃນ/ນອກ | Indoor, Outdoor (Suitable for Damp ສະຖານທີ່) |
| ວັດສະດຸ | ພາດສະຕິກ |
| ຂະໜາດສິນຄ້າ | 2.35"W x 4.4"H |
Figure 5: Feit Electric A19 LED Light Bulb.
8. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
ຂໍ້ມູນການຮັບປະກັນ:
This product is covered by the warranty as labelled on the product packaging. Please refer to the packaging for specific warranty terms and conditions.
ການຊ່ວຍເຫຼືອລູກຄ້າ:
For 24/7 customer support, frequently asked questions, and additional resources, please visit the Feit Electric help center:
ໄປຢ້ຽມຢາມສູນຊ່ວຍເຫຼືອ Feit Electric
Figure 6: Feit Electric customer support information.
