HILTI VC 150-6 X Vacuum Cleaner User Manual

1. ຂໍ້ມູນຄວາມປອດໄພ

ອ່ານຄຳເຕືອນ ແລະ ຄຳແນະນຳດ້ານຄວາມປອດໄພທັງໝົດກ່ອນທີ່ຈະໃຊ້ເຄື່ອງດູດຝຸ່ນນີ້. ການບໍ່ປະຕິບັດຕາມຄຳເຕືອນ ແລະ ຄຳແນະນຳອາດຈະເຮັດໃຫ້ເກີດໄຟຟ້າຊັອດ, ໄຟໄໝ້ ແລະ/ຫຼື ການບາດເຈັບສາຫັດ.

ຄວາມປອດໄພທົ່ວໄປ

• Always disconnect the power plug from the outlet before making any adjustments, changing accessories, or storing the appliance.
• Do not use the vacuum cleaner in wet conditions or to pick up flammable or combustible liquids.
• ຮັກສາຜົມ, ເຄື່ອງນຸ່ງວ່າງ, ນິ້ວມື, ແລະທຸກພາກສ່ວນຂອງຮ່າງກາຍໃຫ້ຫ່າງຈາກຊ່ອງເປີດ ແລະພາກສ່ວນທີ່ເຄື່ອນຍ້າຍ.
• ຫ້າມ​ເອົາ​ສິ່ງ​ຂອງ​ທີ່​ເປັນ​ໄຟ​ໄໝ້ ຫຼື​ສູບ​ຢາ​ເຊັ່ນ​ຢາ​ສູບ, ໄມ້​ຂີດ​ໄຟ, ຫຼື​ຂີ້ເຖົ່າ​ຮ້ອນ.
• ໃຊ້ພຽງແຕ່ຕາມທີ່ອະທິບາຍໄວ້ໃນຄູ່ມືນີ້. ໃຊ້ໄຟລ໌ແນບທີ່ແນະນໍາຂອງຜູ້ຜະລິດເທົ່ານັ້ນ.
• ຫ້າມໃຊ້ກັບສາຍໄຟ ຫຼືປລັກສຽບທີ່ເສຍຫາຍ. ຖ້າເຄື່ອງໃຊ້ບໍ່ໄດ້ເຮັດວຽກຕາມທີ່ຄວນ, ຖືກຖິ້ມ, ເສຍຫາຍ, ຖືກປະໄວ້ກາງແຈ້ງ, ຫຼືຕົກຢູ່ໃນນ້ໍາ, ໃຫ້ສົ່ງກັບສູນບໍລິການ.
• ຫ້າມດຶງ ຫຼືເອົາສາຍບື, ໃຊ້ສາຍເຊືອກເປັນມືຈັບ, ປິດປະຕູໃສ່ສາຍໄຟ, ຫຼືດຶງສາຍໄຟອ້ອມຮອບແຫຼມ ຫຼື ມຸມ. ຢ່າແລ່ນເຄື່ອງໃຊ້ສາຍໄຟ. ຮັກສາສາຍຢູ່ຫ່າງຈາກພື້ນຜິວທີ່ມີຄວາມຮ້ອນ.

2. ຜະລິດຕະພັນເກີນview

The HILTI VC 150-6 X is a robust corded electric vacuum cleaner designed for various cleaning tasks on surfaces such as carpet, hard floor, rugs, and bare floors. It features a 6-gallon capacity and is equipped with a push-button controller and touch control for ease of use.

Image 1: HILTI VC 150-6 X Vacuum Cleaner. This image displays the main vacuum unit, including its wheels, dust container, and the attached hose with a nozzle.

ຄຸນ​ນະ​ສົມ​ບັດ​ທີ່​ສໍາ​ຄັນ​:

• ຕົວແບບ: VC 150-6 X
• ຈໍານວນລາຍການ: 2167146
• ຄວາມອາດສາມາດ: 6 ກາລອນ
• ການຄວບຄຸມ: Push Button Controller, Touch Control
• ການເຄື່ອນຍ້າຍ: 4 Wheels for easy maneuverability
• ປະເພດການກັ່ນຕອງ: Cartridge, Disk, Foam, HEPA Filter (depending on configuration/accessories)

3. ຕັ້ງຄ່າ

Follow these steps to prepare your HILTI VC 150-6 X for first use.

ການຫຸ້ມຫໍ່

1. ເອົາສ່ວນປະກອບທັງຫມົດອອກຈາກການຫຸ້ມຫໍ່ຢ່າງລະມັດລະວັງ.
2. Check for any damage during transit. If any damage is found, contact your HILTI service representative.
3. Ensure all listed components are present: main unit, hose, extension wands, floor nozzle, crevice tool, and filters.

ສະພາແຫ່ງ

1. ຕິດລໍ້: If not pre-assembled, securely attach the four wheels to the base of the vacuum cleaner.
2. ຕິດຕັ້ງການກັ່ນຕອງ: Open the vacuum cleaner's lid/housing. Insert the appropriate filter (e.g., HEPA filter, foam filter) into its designated slot. Ensure it is seated correctly to prevent dust leakage.
3. ທໍ່ເຊື່ອມຕໍ່: Securely attach the flexible hose to the suction inlet on the main unit. Ensure a tight connection.
4. ຄັດຕິດອຸປະກອນເສີມ: Connect the desired extension wands and floor nozzle or other attachments to the end of the hose.

ການເຊື່ອມຕໍ່ພະລັງງານ

Connect the power cord to a suitable electrical outlet (120V). Ensure the outlet is properly grounded.

4. ຄໍາແນະນໍາການດໍາເນີນງານ

This section details how to operate your HILTI VC 150-6 X Vacuum Cleaner effectively.

ກຳລັງເລີ່ມເຄື່ອງດູດຝຸ່ນ

1. Ensure the vacuum cleaner is properly assembled and connected to a power source.
2. Press the power button on the control panel. The vacuum cleaner will start.
3. Use the touch control interface to adjust suction power or switch between modes if available.

ເຄັດລັບການດູດຝຸ່ນ

• For optimal cleaning, move the floor nozzle slowly over the surface.
• Use the appropriate attachment for the surface being cleaned (e.g., floor nozzle for large areas, crevice tool for tight spaces).
• Regularly check the dust container and empty it before it becomes full to maintain suction performance.
• Avoid vacuuming large, sharp objects that could damage the hose or internal components.

Stopping the Vacuum Cleaner

Press the power button again to turn off the vacuum cleaner. Disconnect the power cord from the outlet after use.

5. ບໍາລຸງຮັກສາ

Regular maintenance ensures the longevity and optimal performance of your HILTI VC 150-6 X.

ການລ້າງຖັງຂີ້ຝຸ່ນ

1. ໃຫ້ແນ່ໃຈວ່າເຄື່ອງດູດຝຸ່ນປິດ ແລະ ຖອດປລັກອອກແລ້ວ.
2. Release the latches securing the motor head to the dust container.
3. Carefully lift the motor head off.
4. Empty the contents of the dust container into a waste receptacle.
5. Wipe the inside of the container with a damp ຜ້າຖ້າຈໍາເປັນ.
6. Reassemble the unit, ensuring the latches are securely fastened.

ການເຮັດຄວາມສະອາດການກັ່ນຕອງແລະການທົດແທນ

The VC 150-6 X uses various filter types including Cartridge, Disk, Foam, and HEPA filters. Refer to your specific filter type for cleaning instructions.

• HEPA/Cartridge Filters: Tap gently to dislodge dust. Do not wash unless specified by the manufacturer. Replace every 6-12 months or when suction noticeably decreases.
• Foam Filters: Can often be rinsed with water. Allow to air dry completely before reinstallation.
• Always ensure filters are completely dry before reinserting them into the vacuum cleaner.

ທໍາຄວາມສະອາດທົ່ວໄປ

ເຊັດດ້ານນອກຂອງເຄື່ອງດູດຝຸ່ນດ້ວຍຜ້າອ່ອນໆ, ງamp ຜ້າ. ຢ່າໃຊ້ເຄື່ອງເຮັດຄວາມສະອາດຂັດຫຼືສານລະລາຍ.

6. ການແກ້ໄຂບັນຫາ

This section provides solutions to common issues you might encounter with your HILTI VC 150-6 X.

7. ຂໍ້ມູນຈໍາເພາະ

Detailed technical specifications for the HILTI VC 150-6 X Vacuum Cleaner.

8. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information, technical support, or service inquiries regarding your HILTI VC 150-6 X Vacuum Cleaner, please contact HILTI customer service directly.

Refer to your purchase documentation or the official HILTI website for specific warranty terms and contact details in your region.

ເຈົ້າໜ້າທີ່ HILTI Webເວັບໄຊ: www.hilti.com