1. ບົດແນະນຳ
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your ASTRALPOOL Aster 99 Sand Filter with Valve Ø 600. Please read these instructions thoroughly before attempting to install or operate the filter. Retain this manual for future reference.
1.1. ຂໍ້ມູນຄວາມປອດໄພ
- Always disconnect power to the pump before performing any maintenance or service.
- ຮັບປະກັນວ່າການເຊື່ອມຕໍ່ທັງໝົດແມ່ນປອດໄພ ແລະ ກັນນ້ຳເພື່ອປ້ອງກັນການຮົ່ວໄຫຼ.
- ຢ່າໃຊ້ງານຕົວກອງຖ້າມີຊິ້ນສ່ວນໃດສ່ວນໜຶ່ງເສຍຫາຍ ຫຼື ຂາດຫາຍໄປ.
- Keep children away from the filtration system during operation and maintenance.
- ປຶກສາຜູ້ຊ່ຽວຊານທີ່ມີຄຸນວຸດທິໃນການຕິດຕັ້ງຖ້າທ່ານບໍ່ແນ່ໃຈກ່ຽວກັບຂັ້ນຕອນໃດໆ.
2. ຜະລິດຕະພັນເກີນview ແລະອົງປະກອບ
The ASTRALPOOL Aster 99 Sand Filter is designed for efficient swimming pool water filtration. It consists of a durable filter tank and a multi-port valve that controls the water flow through the system.
ຮູບທີ 1: ASTRALPOOL Aster 99 Sand Filter and Multi-port Valve. The image displays the main filter tank, which is a large, white, spherical unit, alongside a separate black multi-port valve with a handle, used for directing water flow.
2.1. ອົງປະກອບຫຼັກ:
- ຖັງກອງ: The main body where the filter media (sand) is contained.
- Multi-port Valve: Controls the operational modes of the filter (e.g., filter, backwash, rinse).
- ເຄື່ອງວັດແທກຄວາມດັນ: Indicates the internal pressure of the filter, crucial for determining when backwashing is needed.
- ປລັກທໍ່ລະບາຍ: Located at the bottom of the tank for draining water.
3. ຂໍ້ມູນຈໍາເພາະ
Understanding the dimensions and characteristics of your filter is important for proper installation and maintenance.
ຮູບທີ 2: Dimensional diagram of the ASTRALPOOL Aster Sand Filter. This diagram illustrates the filter's height (H), diameter (D), and the positions of the inlet/outlet ports (M, N, K) with a corresponding table showing values for different filter sizes (Ø 500, 600, 750).
3.1. General Specifications for Ø 600 Model:
- ເສັ້ນຜ່າສູນກາງ (D): 600 ມມ
- ຄວາມສູງ (H): 900 ມມ
- Port M (Height from base): 455 ມມ
- Port N (Height from base): 330 ມມ
- Port K (Connection Size): 1 1/2"
3.2. Additional Product Information:
- ASIN: B079L868QJ
- ວັນທີທໍາອິດທີ່ມີ: ວັນທີ 29 ເມສາ 2025
- ຄວາມພ້ອມຂອງອາໄຫຼ່: ຂໍ້ມູນບໍ່ສາມາດໃຊ້ໄດ້.
4. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ
Proper installation is crucial for the filter's performance and longevity. Follow these steps carefully.
4.1. ການເລືອກສະຖານທີ່
- Place the filter on a firm, level surface, preferably concrete, to prevent settling.
- Ensure adequate ventilation and protection from direct sunlight and freezing temperatures.
- Allow sufficient space around the filter for maintenance and service.
4.2. Filling with Filter Media (Sand)
- Ensure the internal standpipe and laterals are properly assembled and secured.
- Place a plastic bag or cover over the standpipe opening to prevent sand from entering.
- Carefully pour the recommended amount and grade of filter sand into the tank.
- Remove the plastic bag/cover and ensure no sand has entered the standpipe.
4.3. Multi-port Valve Installation
- Carefully place the multi-port valve onto the filter tank, aligning the standpipe with the valve's opening.
- Secure the valve to the tank using the provided clamp or bolts, ensuring a tight seal.
- Connect the plumbing from the pump to the "PUMP" port on the valve.
- Connect the plumbing to the pool return lines to the "RETURN" port on the valve.
- Connect a waste line to the "WASTE" port on the valve, directing water to an appropriate drainage area.
- Install the pressure gauge into the designated port on the valve.
5. ຄໍາແນະນໍາການດໍາເນີນງານ
The multi-port valve controls the filter's functions. Always turn off the pump before changing the valve position to prevent damage.
5.1. Multi-port Valve Positions
- ການກັ່ນຕອງ: Normal filtering mode. Water flows through the sand, is cleaned, and returned to the pool.
- BACKWASH: Cleans the filter sand. Water flows in reverse, flushing trapped debris out the waste line.
- ລ້າງອອກ: Used after backwashing to settle the sand and flush any remaining dirty water to waste before returning to FILTER mode.
- ສິ່ງເສດເຫຼືອ/ທໍ່ລະບາຍ: Bypasses the filter, sending water directly from the pool to the waste line. Useful for vacuuming heavy debris or lowering pool water level.
- ໝູນວຽນ: ຂ້າມຕົວກອງ, ໄຫຼວຽນນ້ຳກັບຄືນຫາສະລອຍນ້ຳໂດຍກົງ. ມີປະໂຫຍດສຳລັບການແຈກຢາຍສານເຄມີໂດຍບໍ່ຕ້ອງກັ່ນຕອງ.
- ປິດ: ປິດການໄຫຼທັງໝົດໄປຫາຕົວກອງ. ໃຊ້ສຳລັບການສ້ອມແປງປໍ້າ ຫຼື ຕົວກອງ.
5.2. Initial Startup (First Backwash)
- Ensure the pool is filled to the proper level and all plumbing connections are secure.
- ຕັ້ງວາວຫຼາຍພອດເປັນ ລ້າງຄືນ.
- Turn on the pump. Backwash for 2-3 minutes, or until the water in the sight glass (if present) runs clear.
- ປິດປັ.ມ.
- ຕັ້ງວາວຫຼາຍພອດເປັນ ລ້າງອອກ.
- Turn on the pump. Rinse for 30-60 seconds.
- ປິດປັ.ມ.
- ຕັ້ງວາວຫຼາຍພອດເປັນ ການກັ່ນຕອງ.
- Turn on the pump. Note the initial pressure gauge reading; this is your clean filter pressure.
6. ບໍາລຸງຮັກສາ
Regular maintenance ensures optimal performance and extends the life of your filter.
6.1. Backwashing
Backwash the filter when the pressure gauge reading is 8-10 PSI (0.5-0.7 bar) above the clean filter pressure, or when pool water clarity decreases. Follow the steps outlined in "5.2. Initial Startup (First Backwash)" for each backwash cycle.
6.2. ການປັບປຸງລະດູໜາວ (ຖ້າມີ)
- ປິດປັ໊ມ ແລະ ຕັດການເຊື່ອມຕໍ່ໄຟຟ້າ.
- ຕັ້ງວາວຫຼາຍພອດເປັນ ລະດູໜາວ (if available) or an intermediate position between two settings to relieve pressure on the gasket.
- Remove the drain plug at the bottom of the filter tank to completely drain all water.
- Disconnect all plumbing lines and store them in a dry, frost-free area.
- Remove the pressure gauge and store it indoors.
- Cover the filter to protect it from elements.
7. ການແກ້ໄຂບັນຫາ
ພາກນີ້ແກ້ໄຂບັນຫາທົ່ວໄປທີ່ທ່ານອາດຈະພົບກັບຕົວກອງດິນຊາຍຂອງທ່ານ.
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ການໄຫຼຂອງນ້ໍາຕ່ໍາ / ຄວາມກົດດັນສູງ | Clogged filter sand; pump strainer basket full; closed valve. | Backwash the filter; clean pump strainer basket; check valve position. |
| ນ້ໍາສະນຸກເກີທີ່ມີເມກ | Insufficient filtration time; dirty filter sand; improper chemical balance; damaged laterals. | Increase filtration time; backwash/rinse filter; test and adjust pool chemistry; inspect laterals for damage. |
| ນ້ຳຮົ່ວອອກຈາກວາວ | Worn spider gasket; loose connections. | Replace spider gasket; tighten connections. |
| ຊາຍກັບຄືນສູ່ສະລອຍນໍ້າ | Damaged laterals; too much sand; improper sand grade. | Inspect and replace damaged laterals; ensure correct sand level and grade. |
8. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
Specific warranty details for the ASTRALPOOL Aster 99 Sand Filter with Valve Ø 600 are not provided within this manual. For warranty claims, technical support, or to inquire about spare parts, please contact your authorized ASTRALPOOL dealer or the manufacturer directly. Please have your product model and purchase date available when contacting support.
ໄດ້ ASIN for this product is B079L868QJ.
