StarTech.com RKCONS1901

StarTech.com RKCONS1901 1U Rackmount KVM Console User Manual

ຕົວແບບ: RKCONS1901 | ຍີ່ຫໍ້: StarTech.com

1. ບົດແນະນຳ

The StarTech.com RKCONS1901 is a 1U rack-mount KVM console designed to provide complete keyboard, monitor, and mouse control for a single server or multiple servers when connected through a separate KVM switch (sold separately). This space-efficient solution features a built-in 19-inch LCD display, a full keyboard, and a touchpad, all housed within a durable steel drawer that slides into 1U of rack space.

2. ສິ່ງທີ່ຢູ່ໃນກ່ອງ

  • KVM Console
  • 6 ft [1.8 m] KVM cable
  • M5 cage ແກ່ນ
  • ສະກູດ M5

3. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

Follow these steps to properly install your StarTech.com RKCONS1901 KVM Console into a server rack and connect it to your equipment.

3.1 ການຕິດຕັ້ງ Rack

The KVM console is designed to fit into a standard 1U rack space. Ensure your rack has sufficient depth and mounting points.

  1. Slide the KVM console into the desired 1U rack space.
  2. Secure the console to the rack using the provided M5 cage nuts and M5 screws. Ensure both sides are firmly attached to prevent movement.
StarTech.com RKCONS1901 KVM Console in closed position, ready for rack mounting.

Figure 1: KVM Console in closed position, ready for rack mounting.

3.2 ສາຍເຊື່ອມຕໍ່

Connect the necessary cables to the rear of the KVM console and your server or KVM switch.

  1. Connect the provided 6 ft [1.8 m] KVM cable to the single port on the rear of the KVM console.
  2. Connect the other end of the KVM cable to the VGA and USB ports of your server or KVM switch.
  3. Connect the power cable to the KVM console and a power outlet.
ຫລັງ view of the StarTech.com RKCONS1901 KVM Console showing VGA, USB, and power ports.

ຮູບ 2: ດ້ານຫລັງ view of the KVM Console with connection ports.

3.3 Installation Video Reference

For a visual guide on the installation process, refer to the following video:

Video 1: This video demonstrates the installation of a 19-inch Rack Mount VGA KVM Console into a server rack, showing the physical mounting and initial setup steps.

4. ຄໍາແນະນໍາການດໍາເນີນງານ

Once installed and connected, the KVM console is ready for operation.

4.1 Opening and Closing the Console

  1. To open the console, pull the handle to slide the drawer out of the rack.
  2. Lift the LCD panel to an upright position.
  3. To close, fold down the LCD panel and push the drawer back into the rack until it locks securely.
StarTech.com RKCONS1901 KVM Console in open position, showing the 19-inch LCD monitor, keyboard, and touchpad.

Figure 3: KVM Console in open position, ready for use.

4.2 ການໃຊ້ແປ້ນພິມ ແລະ Touchpad

The integrated keyboard features 99 keys, including a numeric keypad, and the touchpad provides intuitive cursor control.

4.3 OSD Menu Navigation

The On-Screen Display (OSD) menu allows you to adjust monitor settings such as brightness, contrast, and color. Use the buttons located below the LCD panel to navigate the OSD menu.

Video 2: This video provides an introduction to a rack mount KVM monitor switch, demonstrating its basic operation, OSD menu navigation, and switching capabilities.

5. ບໍາລຸງຮັກສາ

To ensure the longevity and optimal performance of your KVM console, follow these maintenance guidelines:

  • ທໍາຄວາມສະອາດ: Use a soft, lint-free cloth to clean the LCD screen and exterior surfaces. For stubborn marks, dampen the cloth with a mild, non-abrasive cleaner. Avoid spraying liquids directly onto the console.
  • ການລະບາຍອາກາດ: Ensure proper airflow around the console. Do not block ventilation openings.
  • ການຄຸ້ມຄອງສາຍໄຟ: Keep cables neatly organized to prevent damage and ensure smooth operation of the sliding drawer.
  • ເງື່ອນໄຂສິ່ງແວດລ້ອມ: Operate the console within the specified temperature range of 0 to 40 degrees Celsius.

6. ການແກ້ໄຂບັນຫາ

If you encounter issues with your KVM console, refer to the following common troubleshooting steps:

  • ບໍ່ມີການສະແດງຜົນ: Check all video cable connections. Ensure the server or KVM switch is powered on and outputting a video signal. Verify the console's power adapter is securely connected.
  • ແປ້ນພິມ/ເມົາສ໌ບໍ່ຕອບສະໜອງ: Check all USB cable connections. Ensure the server or KVM switch recognizes the USB devices. Try connecting the KVM cable to a different USB port on the server/switch.
  • Console Not Sliding Smoothly: Inspect the slide rails for any obstructions or damage. Ensure the rack mounting screws are not overtightened, which could impede movement.
  • ຄວາມລະອຽດການສະແດງຜົນບໍ່ຖືກຕ້ອງ: Access the OSD menu to adjust display settings. Ensure your server's video output is configured to a resolution supported by the 19-inch LCD (up to 1280x1024).

7. ຂໍ້ມູນຈໍາເພາະ

ຄຸນສົມບັດຂໍ້ມູນຈໍາເພາະ
ໝາຍເລກຕົວແບບRKCONS1901
ຍີ່ຫໍ້StarTech.com
ຄວາມສູງຂອງ Rack1U
ຂະຫນາດຈໍສະແດງຜົນ19 ນິ້ວ
ປະເພດການສະແດງActive Matrix TFT LCD
ຄວາມລະອຽດສູງສຸດ1280x1024
ແປ້ນພິມ99-key full keyboard with numeric keypad
ອຸປະກອນຊີ້ແຜ່ນສໍາຜັດ
ອິນເຕີເຟດວິດີໂອVGA
ຮອງຮັບ USBແມ່ນແລ້ວ
ອຸນຫະພູມປະຕິບັດການ0 ຫາ 40 ອົງສາເຊນຊຽດ
MTBF50,000 ຊົ່ວໂມງ
ຂະໜາດສິນຄ້າ (LxWxH)21 x 19 x 1.7 ນິ້ວ
ນ້ໍາຫນັກລາຍການ26.8 ປອນ

8. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

The StarTech.com RKCONS1901 is backed by a StarTech.com warranty. For specific warranty details and technical support, please refer to the official StarTech.com webເວັບໄຊ ຫຼືຕິດຕໍ່ບໍລິການລູກຄ້າຂອງເຂົາເຈົ້າໂດຍກົງ. ຮັກສາໃບຮັບເງິນການຊື້ຂອງທ່ານສໍາລັບການຮ້ອງຂໍການຮັບປະກັນ.

ເອກະສານທີ່ກ່ຽວຂ້ອງ - RKCONS1901

ກ່ອນview StarTech.com 4/8/16 Port 1U Rack Mount VGA USB KVM Switch with OSD - User Manual
Detailed user manual for the StarTech.com 4/8/16 Port 1U Rack Mount VGA USB KVM Switch with OSD (models SV431DUSBU, SV831DUSBU, SV1631DUSBU). Learn about installation, operation, OSD features, specifications, and technical support.
ກ່ອນview StarTech.com 8-Port Rackmount KVM Switch - ຄູ່ມືຜູ້ໃຊ້ 4K 60Hz
ຄູ່ມືຜູ້ໃຊ້ສໍາລັບ StarTech.com R8AD122-KVM-SWITCH / R8AH202-KVM-SWITCH 8-Port Rackmount KVM Switch. ໃຫ້ຄໍາແນະນໍາຢ່າງລະອຽດກ່ຽວກັບການຕິດຕັ້ງ, ການເຊື່ອມຕໍ່ consoles ແລະ PCs, ແລະການນໍາໃຊ້ຄໍາສັ່ງ hotkey ສໍາລັບການດໍາເນີນງານ 4K 60Hz.
ກ່ອນview StarTech.com 4/8/16 Port 1U Rack Mount USB VGA KVM Switch with OSD User Manual
This user manual provides detailed information on the StarTech.com 4/8/16 Port 1U Rack Mount USB VGA KVM Switch with OSD, including installation, operation, specifications, and technical support.
ກ່ອນview StarTech.com SV441DUSBI / SV841DUSBI 4/8-Port Enhanced Digital USB KVM Switch Over IP with File ໂອນຄູ່ມືຜູ້ໃຊ້
User manual for the StarTech.com SV441DUSBI and SV841DUSBI 4/8-Port Enhanced Digital USB KVM Switch Over IP with File Transfer. Learn about installation, configuration, operation, remote management, and troubleshooting.
ກ່ອນview StarTech.com SV231DVIUDDM & SV431DVIUDDM: 2 & 4 Port DVI USB KVM Switch User Manual
User manual for StarTech.com SV231DVIUDDM (2-port) and SV431DVIUDDM (4-port) DVI USB KVM Switches with DDM. Covers installation, operation, specifications, hot-key functions, technical support, and warranty information.
ກ່ອນview StarTech.com ADJSHELFHD/ADJSHELFHDV 1U ສາມາດປັບໄດ້ສູງ Load Fixed Rackmount Shelf - ການຕິດຕັ້ງ ແລະຂໍ້ມູນຈໍາເພາະ
ຮຽນຮູ້ວິທີຕິດຕັ້ງ ແລະນໍາໃຊ້ StarTech.com ADJSHELFHD ແລະ ADJSHELFHDV 1U ຊັ້ນວາງວາງວາງ rackmount ຄົງທີ່ທີ່ສາມາດປັບໄດ້ສູງ. ຄູ່​ມື​ນີ້​ກວມ​ເອົາ​ຂັ້ນ​ຕອນ​ການ​ຕິດ​ຕັ້ງ​, ລວມ​ອຸ​ປະ​ກອນ​ເສີມ​, ແລະ​ສະ​ເພາະ​ດ້ານ​ວິ​ຊາ​ການ​ສໍາ​ລັບ​ການ shelves rack ເຄື່ອງ​ແມ່​ຂ່າຍ​ທີ່​ທົນ​ທານ​ເຫຼົ່າ​ນີ້​.