ແນະນຳ
The TESmart 4x1 HDMI Switch HSW0401A1U allows you to connect up to four HDMI source devices to a single HDMI display. This device supports 4K@60Hz resolution, HDR, HDCP 2.2, and 3D, providing high-quality video and audio. It also features optical S/PDIF and L/R audio outputs for enhanced audio flexibility. Control is available via front panel buttons or an IR remote control, with an optional automatic switching mode for convenience.
ຮູບທີ 1: The TESmart 4x1 HDMI Switch streamlines connections, allowing multiple input devices to share a single display, reducing cable clutter.
ຄຸນນະສົມບັດທີ່ສໍາຄັນ
- 4x1 HDMI Switcher: Connects up to four HDMI source devices to one HDMI display.
- 4K HDMI with Audio Output: Supports 3840x2160@60Hz 4:4:4, HDR, HDCP 2.2, and 1080P 3D. Includes S/PDIF optical and L/R analog audio outputs.
- ວິທີການສະຫຼັບຫຼາຍວິທີ: Easily switch between sources using front panel buttons, IR remote control, or automatic detection.
- ຄວາມເຂົ້າກັນໄດ້ຢ່າງກວ້າງຂວາງ: Compatible with various HDMI sources such as PlayStation, Xbox, Nintendo Switch, Blu-ray players, set-top boxes, Chromecast, Apple TV, and projectors.
- ການກໍ່ສ້າງທົນທານ: Features an aluminum alloy casing ເພື່ອເພີ່ມຄວາມທົນທານ.
ຮູບທີ 2: The switch supports advanced video technologies including 4K@60Hz, HDCP 2.2, HDR 10, and 3D for a high-quality viewປະສົບການ.
ຮູບທີ 3: The switch offers broad compatibility with a range of input and output devices, making it versatile for different setups.
ສິນຄ້າເກີນview
ແຜງດ້ານຫນ້າແລະຫລັງ
ຮູບທີ 4: Front and Rear Panel Layout of the TESmart 4x1 HDMI Switch.
ຄຸນນະສົມບັດຫນ້າຈໍ:
- ຕົວຮັບ IR: Receives signals from the IR remote control.
- Input Selection Status LEDs (1-4): Indicate the currently active HDMI input.
- ປຸ່ມເລືອກການປ້ອນຂໍ້ມູນ: Manually cycles through HDMI input sources.
- Audio Mode Selection Status LEDs (5.1, 2.0, Auto): Show the selected audio output mode.
- Audio Mode Selection Button: Toggles between 5.1 channel, 2.0 channel, and Auto audio output modes.
- ສັບປ່ຽນພະລັງງານ: ເປີດ ຫຼື ປິດອຸປະກອນ.
ຄຸນນະສົມບັດຂອງແຜງດ້ານຫລັງ:
- ການປ້ອນຂໍ້ມູນພະລັງງານ DC 5V: Connects to the provided 5V DC power adapter.
- HDMI Input Ports (1-4): ເຊື່ອມຕໍ່ອຸປະກອນແຫຼ່ງ HDMI ຂອງທ່ານ.
- ພອດອອກ HDMI: ເຊື່ອມຕໍ່ກັບຈໍສະແດງຜົນ HDMI ຂອງທ່ານ.
- S/PDIF Optical Audio Output: Connects to an optical audio receiver or soundbar.
- AUX L/R Audio Output: Connects to an analog audio system via a 3.5mm jack.
ຄໍາແນະນໍາການຕິດຕັ້ງ
- ເຊື່ອມຕໍ່ແຫຼ່ງ HDMI: Connect up to four HDMI source devices (e.g., gaming consoles, Blu-ray players, PCs) to the HDMI Input ports (1-4) on the rear panel of the switch using high-quality HDMI cables.
- ເຊື່ອມຕໍ່ຈໍສະແດງຜົນ HDMI: Connect your HDMI display (TV, monitor, projector) to the HDMI Output port on the rear panel of the switch using a high-quality HDMI cable.
- ເຊື່ອມຕໍ່ສຽງອອກ (ທາງເລືອກ):
- For optical audio, connect an S/PDIF optical cable from the switch's S/PDIF port to your audio receiver or soundbar.
- For analog audio, connect a 3.5mm audio cable from the switch's L/R port to your audio system.
- ເຊື່ອມຕໍ່ພະລັງງານ: Plug the provided 5V DC power adapter into the DC 5V input port on the switch, then plug the adapter into a power outlet.
- ເປີດ: Turn on the HDMI switch using the power switch on the front panel. The LED indicators will illuminate.
ຄໍາແນະນໍາການດໍາເນີນງານ
ການສະຫຼັບອິນພຸດ HDMI
ຮູບທີ 5: Multiple methods for switching between HDMI sources.
- Manual Switching (Front Panel): Press the "Input" button on the front panel to cycle sequentially through the connected HDMI sources (Input 1 → Input 2 → Input 3 → Input 4). The corresponding LED indicator will light up.
- ການຄວບຄຸມໄລຍະໄກ IR: Use the provided IR remote control to directly select the desired input by pressing the corresponding number button (1, 2, 3, or 4). Ensure the remote is pointed towards the IR receiver on the front panel.
- ສະຫຼັບອັດຕະໂນມັດ: The switch supports automatic detection. When a new input device is attached or powered on, the HDMI switch will automatically switch to this newly plugged-in source. If a connected input source is removed, the HDMI switch will switch to the first valid input source automatically. If the HDMI switch is connected to a non-signal input port, it will switch to the next valid port automatically in a few seconds.
ການເລືອກໂໝດສຽງ
- Press the "Audio" button on the front panel or the corresponding button on the IR remote to select the desired audio output mode: 5.1 channel, 2.0 channel, or Auto. This allows you to match the audio output to your sound system's capabilities.
ວິດີໂອ 1: This video demonstrates how to enable or disable the automatic detection switch mode on the TESmart 4x1 HDMI Switch, showing the button presses and LED indicator responses.
ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ຂໍ້ມູນຈໍາເພາະ |
|---|---|
| ໝາຍເລກຕົວແບບ | HSW0401A1U |
| ຂະໜາດສິນຄ້າ | 7.72 x 3.15 x 1.1 ນິ້ວ |
| ນ້ໍາຫນັກລາຍການ | 1.2 ປອນ (500g) |
| ການປະຕິບັດຕາມ HDCP | 2.2 |
| ອັດຕາຂໍ້ມູນ | 18 Gbps |
| ຄວາມລະອຽດສູງສຸດ | 3840x2160@60Hz 4:4:4 |
| ສະຫນັບສະຫນູນສຽງ | Surround sound (up to 7.1ch) or stereo digital audio |
| ການປົກປ້ອງ ESD | Human body model - ±8KV (Air-gap discharge) |
| ປ້ອນຂໍ້ມູນ | 4* HDMI ປະເພດ A |
| ຜົນຜະລິດ | 1* HDMI Type A, 1* AUX (for L/R audio out), 1* S/PDIF audio out |
| Chasing ວັດສະດຸ | ໂລຫະປະສົມອາລູມິນຽມ |
| ການສະຫນອງພະລັງງານ | DC 5V 1A |
| ອຸນຫະພູມປະຕິບັດງານ / ການເກັບຮັກສາ | 0 to 70 degree / -40 to 85 degree Celsius |
| ຄວາມຊຸ່ມຊື່ນປະຕິບັດການ | 10 ຫາ 90% RH |
| ປະເພດຫມໍ້ໄຟໄລຍະໄກ | CR2025 (ບໍ່ລວມ) |
ການແກ້ໄຂບັນຫາ
- No Signal or Flickering Display:
- ໃຫ້ແນ່ໃຈວ່າສາຍ HDMI ທັງໝົດເຊື່ອມຕໍ່ຢ່າງປອດໄພ.
- Use certified high-speed 18Gbps HDMI cables, especially for 4K@60Hz content, to prevent signal loss or flickering.
- Verify the correct input source is selected on the switch and your display.
- Try restarting the switch and connected devices.
- Audio Issues (No Sound or Incorrect Format):
- Check that your audio system is properly connected to the S/PDIF or L/R output ports.
- Ensure the audio mode on the switch (5.1, 2.0, Auto) matches the capabilities of your audio receiver or soundbar.
- Confirm that the audio settings on your source device are correctly configured for the desired output.
- IR Remote Control Not Responding:
- Ensure a CR2025 battery is correctly installed in the remote (battery not included).
- Point the remote directly at the IR receiver on the front panel of the switch.
- Remove any obstructions between the remote and the switch.
- ອຸປະກອນຮ້ອນເກີນໄປ:
- Ensure the switch is placed in a well-ventilated area and not covered, allowing for proper heat dissipation.
ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
The TESmart 4x1 HDMI Switch HSW0401A1U comes with a 1-year warranty from the date of order. Free technical support is available for any issues or questions you may have. For assistance, please contact TESmart support through the vendor's official channels.
