Nitrous Outlet 00-61002

Nitrous Outlet ProMax Dual Channel Progressive Controller Instruction Manual

ແບບ ຈຳ ລອງ: 00-61002

ແນະນຳ

The Nitrous Outlet ProMax Progressive Controller is an advanced system designed to optimize nitrous delivery for performance applications. It integrates system activation and safety functions with extensive tuning and traction aids. This manual provides essential information for the proper installation, operation, and maintenance of your ProMax controller.

ເນື້ອໃນຊຸດ

ກວດ​ສອບ​ວ່າ​ອົງ​ປະ​ກອບ​ທັງ​ຫມົດ​ແມ່ນ​ມີ​ຢູ່​ກ່ອນ​ທີ່​ຈະ​ເລີ່ມ​ຕົ້ນ​ການ​ຕິດ​ຕັ້ງ​:

Nitrous Outlet ProMax Controller and included accessories

ຮູບທີ 1: ProMax Progressive Controller, 20-pin connector, USB flash drive, and USB cable.

ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

Proper installation is crucial for the safe and effective operation of the ProMax controller. It is recommended that installation be performed by a qualified technician.

  1. ຕິດ​ຕັ້ງ​ຕົວ​ຄວບ​ຄຸມ​: Select a secure, dry location away from excessive heat and vibration. Ensure adequate space for wiring connections. The controller can be mounted using the integrated mounting tabs.
  2. Nitrous Outlet ProMax Controller installed in a vehicle's glove compartment

    ຮູບທີ 2: Example installation of the ProMax controller in a vehicle's glove compartment.

  3. ການເຊື່ອມຕໍ່ສາຍໄຟ: Connect the 20-pin wiring harness to the controller. Carefully follow the wiring diagram provided in the separate wiring guide (not included in this manual) for connecting to vehicle power, ground, sensors (Vehicle Speed, Trans Brake, MAP Sensor, Wide Band O2, Nitrous Pressure, Fuel Pressure), and solenoid drivers.
  4. ການເຊື່ອມຕໍ່ PC: Connect the controller to a PC/laptop using the provided USB cable for initial setup and programming.
  5. ການຕິດຕັ້ງຊອບແວ: Install the ProMax tuning software from the provided USB flash drive onto your PC.
  6. Nitrous Outlet ProMax Controller with wiring harness and USB cable

    ຮູບທີ 3: The ProMax controller with its wiring harness and USB cable for connection.

  7. ອັບເດດເຟີມແວ: Ensure the controller has the latest firmware. Firmware updates can be performed via the PC software.

ຄໍາແນະນໍາການດໍາເນີນງານ

The ProMax controller offers extensive tuning capabilities. Refer to the software manual for detailed instructions on each function.

ບໍາລຸງຮັກສາ

The Nitrous Outlet ProMax controller is designed for reliability with minimal maintenance. Adhere to the following guidelines:

ການແກ້ໄຂບັນຫາ

This section provides general troubleshooting steps. For specific issues, consult the detailed software manual or contact technical support.

ບັນຫາສາເຫດທີ່ເປັນໄປໄດ້ການແກ້ໄຂ
ການຄວບຄຸມບໍ່ໄດ້ເປີດIncorrect wiring, blown fuse, loose connectionVerify power and ground connections. Check vehicle fuses. Ensure harness is securely connected.
Nitrous system not activatingIncorrect activation settings, solenoid driver issue, sensor malfunctionCheck activation parameters in software (TPS, WOT, RPM). Test solenoid drivers. Verify sensor inputs.
PC software not connecting to controllerUSB cable issue, driver not installed, controller not poweredEnsure controller is powered. Try a different USB port/cable. Reinstall USB drivers.
Inconsistent nitrous deliveryIncorrect progressive ramp settings, pressure fluctuations, solenoid issuesReview progressive ramp settings. Check nitrous bottle pressure. Inspect solenoids for proper function.

ຂໍ້ມູນຈໍາເພາະ

ຄຸນສົມບັດລາຍລະອຽດ
ໝາຍເລກຕົວແບບ00-61002
ຜູ້ຜະລິດNitrous Outlet
ຂະໜາດສິນຄ້າ6 x 7 x 12 ນິ້ວ
ນ້ໍາຫນັກລາຍການ3 ປອນ
Solenoid Drivers2 independent, 70 Amp
Progressive Frequency10-30 Hz (adjustable by 1 Hz)
Tune StorageUp to 5 internal tune-ups
Ignition Retard Outputs2
ວັດສະດຸປ້ອນVehicle Speed, Trans Brake, MAP Sensor, Two Wide Band O2 sensors, Two Nitrous Pressure Sensors, Fuel Pressure Sensor
ການເຊື່ອມຕໍ່USB, CAN Bus Output
ຄຸນນະສົມບັດພິເສດUpdateable Firmware, Datalogging Capable, Multi-gear lockout, Resume and restart feature

ຂໍ້ມູນການຮັບປະກັນ

Nitrous Outlet products are manufactured to high standards. For specific warranty terms and conditions, please refer to the official warranty statement included with your product or visit the Nitrous Outlet official webເວັບໄຊ. ຮັກສາຫຼັກຖານການຊື້ຂອງທ່ານສໍາລັບການຮ້ອງຂໍການຮັບປະກັນ.

ການປະຕິເສດທາງກົດໝາຍ: Nitrous Outlet is not responsible for parts not being smog-legal in your area. Many parts are not legal for sale or use in California, or on any pollution controlled vehicle. It is your responsibility to be aware of your local emissions laws and checking for legality of any parts purchased.

ສະຫນັບສະຫນູນ

For technical assistance, questions regarding installation, operation, or troubleshooting, please contact Nitrous Outlet customer support:

ເອກະສານທີ່ກ່ຽວຂ້ອງ - 00-61002

ກ່ອນview Nitrous Outlet Purge Kit Installation Guide and Wiring
Detailed installation instructions and wiring diagram for the Nitrous Outlet Purge Kit (Part #'s 00-62000, 00-62001, 00-62008). Learn how to improve nitrous system performance with this in-line purge system.
ກ່ອນview Nitrous Outlet 4500 Flange Carburetor WOT Switch and Bracket Installation Guide
Detailed installation instructions and system wiring diagram for the Nitrous Outlet 4500 Flange Carburetor WOT Switch and Bracket (Part Number: 00-51045). Learn how to properly mount and wire this component for your vehicle's nitrous oxide system.
ກ່ອນview ຄູ່ມືການຕິດຕັ້ງທໍ່ Nitrous Outlet 2010-2015 Camaro Rear Hatch Nitrous Bottle Bracket
ຄໍາແນະນໍາໃນການຕິດຕັ້ງທີ່ສົມບູນແບບສໍາລັບ Nitrous Outlet 2010-2015 Camaro Rear Hatch 10lb & 15lb Nitrous Bottle Bracket (Part Number: 00-33002). ຮຽນ​ຮູ້​ວິ​ທີ​ການ​ຕິດ​ຂວດ nitrous ຂອງ​ທ່ານ​ຢ່າງ​ຖືກ​ຕ້ອງ​ສໍາ​ລັບ Chevrolet Camaro ຂອງ​ທ່ານ​.
ກ່ອນview ຄໍາແນະນໍາການຕິດຕັ້ງລະບົບແຜ່ນ Nitrous Ford Mustang EcoBoost ປີ 2015-2020
ຄູ່ມືການຕິດຕັ້ງທີ່ສົມບູນແບບສໍາລັບລະບົບແຜ່ນ Nitrous 00-10192-XX ທີ່ອອກແບບມາສໍາລັບ Ford Mustang EcoBoost 2015-2020. ປະກອບມີເຄື່ອງມື, ວັດສະດຸ, ຂັ້ນຕອນໂດຍຂັ້ນຕອນ, ແລະການເຕືອນໄພຄວາມປອດໄພ.
ກ່ອນview ຄູ່ມືການຕິດຕັ້ງການແປງ Dodge Hellcat 6.2L Hemi Blower Spacer Plate 2015-2023
ຂັ້ນຕອນໂດຍຂັ້ນຕອນຄໍາແນະນໍາການຕິດຕັ້ງສໍາລັບ Nitrous Outlet 2015-2023 6.2L Hemi Hellcat Challenger/Charger/Red Eye/Demon ແລະ 2018-2019 Trackhawk Blower Spacer Plate Conversion. ປະກອບມີເຄື່ອງມືທີ່ຈໍາເປັນ, disassembly, ການຕິດຕັ້ງແຜ່ນ, ການຕິດຕັ້ງ jet, ການຕິດຕັ້ງສາຍ, ແລະການປະກອບສຸດທ້າຍ.
ກ່ອນview 2007-14 Silverado/Sierra Switch ຄໍາແນະນໍາການຕິດຕັ້ງແຜງ
ຄູ່ມືການຕິດຕັ້ງລາຍລະອຽດສໍາລັບ Nitrous Outlet 2007-14 Silverado/Sierra Switch Panel (Part Number 00-11047), ອອກແບບມາສໍາລັບລົດກະບະຂະໜາດເຕັມຂອງ Chevrolet ແລະ GMC. ປະກອບມີເຄື່ອງມືທີ່ຈໍາເປັນ, ຄໍາແນະນໍາຂັ້ນຕອນໂດຍຂັ້ນຕອນ, ແລະແຜນວາດສາຍ.