1. ຜະລິດຕະພັນເກີນview
The Waveshare 7-inch HDMI LCD (H) is a versatile capacitive touch screen monitor featuring a 1024x600 IPS display with a toughened glass cover. Designed for broad compatibility, it supports various single-board computers and systems, offering a responsive and clear visual interface.
ຄຸນນະສົມບັດທີ່ສໍາຄັນ:
- ຈໍສະແດງຜົນ IPS ຂະໜາດ 7 ນິ້ວ: ສະຫນອງກວ້າງ viewing angle and vibrant colors.
- 1024x600 Resolution: Offers clear and crisp visuals.
- Capacitive Touch: Supports 5-point touch (driver-free for most supported systems).
- Toughened Glass Cover: Enhances durability and protection.
- ຄວາມເຂົ້າກັນໄດ້ຢ່າງກວ້າງຂວາງ: Works with Raspberry Pi (all versions), Jetson Nano, PCs (Windows 10/8.1/8/7), and various game consoles (Xbox360, PS4, Switch).
- ການດໍາເນີນງານທີ່ບໍ່ມີຄົນຂັບ: Plug-and-play functionality for many supported operating systems.
2. ເນື້ອໃນຊຸດ
ກວດສອບວ່າລາຍການທັງຫມົດທີ່ລະບຸໄວ້ຂ້າງລຸ່ມນີ້ແມ່ນລວມຢູ່ໃນຊຸດຂອງທ່ານ:
- 1x 7-inch HDMI LCD (H) Monitor
- 2x Brackets (for stand)
- 1x ສາຍ HDMI
- ສາຍ USB-A ຫາ Type-C 1x
- 1x Mini HDMI to HDMI Adapter
- Screws ຍາວ 2x
- 4x Copper Screws
- Screws ສັ້ນ 4x
- 1x screwdriver
- 1x ຄູ່ມືຜູ້ໃຊ້
3. ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ຂໍ້ມູນຈໍາເພາະ |
|---|---|
| ຈໍສະແດງຜົນ | 7 ນິ້ວ |
| ປະເພດແຜງ | IPS |
| ແຕະປະເພດ | ໜ້າຈໍສຳຜັດແບບ Capacitive 5 ຈຸດ |
| ຄວາມລະອຽດ | 1024 x 600 |
| ຄວາມສະຫວ່າງ | 420 cd/m² |
| Viewໃນມຸມ | 170° (H) / 170° (V) |
| ອັດຕາການໂຫຼດຂໍ້ມູນຄືນໃໝ່ | 60Hz |
| ການໂຕ້ຕອບ | HDMI, Type-C, 3.5mm Audio |
| ການປ້ອນຂໍ້ມູນ Voltage | 5V |
| ພະລັງງານທັງໝົດ (ສູງສຸດ) | 2.55W |
| ອຸນຫະພູມປະຕິບັດການ | -20°C ~ 60°C |
| ອຸນຫະພູມການເກັບຮັກສາ | -30°C ~ 70°C |
| ນ້ຳໜັກສິນຄ້າ | 0.9 ປອນ (10.6 ອໍ) |
| Screen Dimensions (L×W×D) | 165x102x15mm (6.5x4.0x0.6 in) |
| Display Area (L×W) | 154x86ມມ |
| ລະບົບທີ່ຮອງຮັບ | Windows 11/10/8.1/8/7, Raspbian, Ubuntu, Kodi |
4. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ
4.1 ການຕິດຕັ້ງ
- Carefully remove the protective film from the included stand brackets.
- Align the brackets with the screw holes on the back of the monitor.
- Secure the brackets using the provided long screws and screwdriver. Do not overtighten.
4.2 Raspberry Pi Connection Setup
To ensure proper functionality with Raspberry Pi, specific configuration changes are required:
- Insert your Raspberry Pi's SD card into a computer.
- ເປີດ
config.txtfile located in the root directory of the SD card. - Add the following lines at the end of the file:
max_usb_current=1
hdmi_force_hotplug=1
config_hdmi_boost=7
hdmi_group=2
hdmi_mode=87
hdmi_drive=1
display_rotate=0
hdmi_cvt 1024 600 60 6 0 0 0If you are using the official Raspberry Pi OS (2021-10-30), change:
dtoverlay=vc4-kms-v3d
to:
#dtoverlay=vc4-kms-v3d- Save the changes and safely eject the SD card.
- Insert the SD card back into your Raspberry Pi.
- Connect the HDMI and TOUCH interfaces of the monitor to the Raspberry Pi's card.
- Power up the Raspberry Pi, and the display and touch functionality should work properly.
4.3 PC Connection Setup
For PC connection, set the resolution according to the instructions in the manual. If using dual monitors, configure the primary and secondary screens, and adjust the resolution for each monitor accordingly.
5. ການດໍາເນີນງານຂອງ Monitor
5.1 ເມນູການສະແດງເທິງໜ້າຈໍ (OSD).
The monitor features tactile buttons on the back for navigating the OSD menu. These buttons allow you to adjust various display settings.
- ເມນູ: Press to open the main menu, then press again to enter a sub-menu.
- Left/Up: Navigate left/up in the menu, or decrease values.
- Right/Down: Navigate right/down in the menu, or increase values.
- ກັບຄືນ: Exit the current menu or return to the previous menu.
- ພະລັງງານ: ເປີດ/ປິດຈໍສະແດງຜົນ.
5.2 ແຕະການຄວບຄຸມ
The capacitive touch screen supports up to 5-points touch, depending on the operating system. This allows for intuitive interaction with compatible devices.
6. ບໍາລຸງຮັກສາ
ເພື່ອຮັບປະກັນອາຍຸຍືນ ແລະປະສິດທິພາບທີ່ດີທີ່ສຸດຂອງຈໍພາບຂອງທ່ານ, ປະຕິບັດຕາມຄໍາແນະນໍາການບໍາລຸງຮັກເຫຼົ່ານີ້:
- ທໍາຄວາມສະອາດ: Use a soft, dry cloth to clean the external housing. For the screen, use a soft cloth slightly dampຫຸ້ມດ້ວຍນ້ໍາຫຼືເຄື່ອງເຮັດຄວາມສະອາດຫນ້າຈໍທີ່ບໍ່ມີການຂັດ. ຫຼີກເວັ້ນການສານເຄມີທີ່ຮຸນແຮງ.
- ການຈັດການ: Avoid dropping the monitor or subjecting it to strong impacts. Do not place heavy objects on the screen.
- ສະພາບແວດລ້ອມ: Keep the monitor in a well-ventilated area, away from direct sunlight, heat sources, and excessive moisture.
7. ການແກ້ໄຂບັນຫາ
- Monitor is not powering on: Ensure the power cable is properly plugged into the Raspberry Pi and the included USB-A to C cable is securely connected between the board and the display.
- Image is reversed: The monitor does not support image flip.
- Touch functionality not working: Make sure the USB-A to C cable is connected between the Raspberry Pi board and the display, directly from the display to the power socket.
- No signal on display: Ensure the HDMI cable is properly connected between the Raspberry Pi board and the display. If using a mini HDMI port, make sure to use the included mini HDMI to HDMI adapter.
- ລະບົບປະຕິບັດການສະຫນັບສະຫນູນ: Windows 11/10/8.1/7, Raspbian, Ubuntu, Kodi.
- Using with PS3/PS4/Xbox One/Xbox 360: Yes, please use the HDMI port.
- Power source shut off, monitor not turning back on: If the monitor will come back on, or do you have to press the button.
- ບໍ່ມີສຽງ: This monitor has no built-in speakers. For sound output, connect external speakers via the 3.5mm audio jack.
8. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
The product comes with a 12-month warranty for quality-related issues. You can return any undamaged product within 12 months for a refund or replacement. Shipping costs and import duties/taxes are not included in the refund/replacement process.
ຂໍ້ມູນຕິດຕໍ່:
- Webເວັບໄຊ: www.eyoyousa.com
- ອີເມວ: support@eyoyomonitor.com
- ໂທ: 909-317-8588 (9:00AM-5:00PM; Monday-Friday)
- USA Office Address: 10700 Jersey Blvd Ste 640, Rancho Cucamonga, CA 91730, USA
9. ຫ້ອງວາງສະແດງສື່
ຮູບພາບຜະລິດຕະພັນ
