Uponor Smatrix Base T-145 Wired Room Thermostat User Manual

1. ຜະລິດຕະພັນເກີນview

The Uponor Smatrix Base T-145 is a wired digital room thermostat designed for precise temperature control in heating and cooling systems, particularly underfloor heating. It directly transmits measured values to the Smatrix Base X-145 control module, ensuring efficient and responsive climate management. This thermostat features a clear digital display for easy temperature adjustment and monitoring.

ຮູບພາບ 1.1: ດ້ານຫນ້າ view of the Uponor Smatrix Base T-145 Wired Room Thermostat, showing its square white casing and central rotary dial for temperature adjustment. The 'Uponor' logo is visible at the bottom left.

2. ຄຸນນະສົມບັດທີ່ສໍາຄັນ

• Digital Temperature Setting: Allows precise adjustment of the desired room temperature.
• ການສະແດງເວີຊັນຊອບແວ: Shows the software version upon startup.
• ໜ້າຈໍ Backlit: The display illuminates for 10 seconds after activation for improved visibility.
• Heating/Cooling Indicator: Clearly displays the current operating mode.
• Setback Function: Enables energy-saving temperature reduction during unoccupied periods.
• Setback Temperature Display: Shows the active setback temperature.
• ການເລືອກຫົວໜ່ວຍອຸນຫະພູມ: ສະຫຼັບລະຫວ່າງ Celsius ແລະ Fahrenheit.
• ການສະແດງສະຖານະຫມໍ້ໄຟ: Indicates the status of any internal backup battery or connected sensor batteries.
• Flexible Sensor Options: Supports room temperature (RT), floor sensor with max/min limits (FT), remote sensor (FS), and outdoor sensor (RO) inputs.
• Individual Room Cooling: Capable of managing cooling functions on a room-by-room basis.

3. ຂໍ້ກໍານົດດ້ານວິຊາການ

4. ຂໍ້ມູນຄວາມປອດໄພ

Please read and understand all safety instructions before installing or operating this device. Failure to follow these instructions may result in electric shock, fire, or property damage.

• ຄວາມປອດໄພທາງໄຟຟ້າ: Installation must be performed by a qualified electrician in accordance with local electrical codes and regulations. Ensure power is disconnected at the main circuit breaker before any wiring work.
• ເງື່ອນໄຂສິ່ງແວດລ້ອມ: Do not expose the thermostat to direct water spray, excessive humidity, or extreme temperatures outside its operating range. The device has an IP30 protection rating, meaning it is protected against solid objects over 2.5mm but not against water.
• ການ​ນໍາ​ໃຊ້​ຈຸດ​ປະ​ສົງ​: This thermostat is designed for controlling heating and cooling systems. Do not use it for purposes other than its intended function.
• ທໍາຄວາມສະອາດ: ໃຊ້ຜ້າອ່ອນໆ, ແຫ້ງເພື່ອທໍາຄວາມສະອາດ. ຢ່າໃຊ້ເຄື່ອງເຮັດຄວາມສະອາດຂັດຫຼືສານລະລາຍ.

5. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

The Uponor Smatrix Base T-145 thermostat is a wired device requiring connection to an Uponor Smatrix Base X-145 control module via a 4-wire bus system. Professional installation is recommended.

5.1 ການຕິດຕັ້ງ

1. ການຕັດການເຊື່ອມຕໍ່ໄຟຟ້າ: Ensure the main power supply to the heating/cooling system is turned off at the circuit breaker before beginning installation.
2. ການເລືອກສະຖານທີ່: Choose an indoor location on an interior wall, away from direct sunlight, drafts, and heat sources (e.g., lamps, appliances) that could affect temperature readings. Mount at a standard thermostat height (approximately 1.5 meters from the floor).
3. ສາຍໄຟ: Connect the 4-wire bus cable from the Smatrix Base X-145 control module to the designated terminals on the T-145 thermostat. Refer to the wiring diagram provided with the Smatrix Base X-145 control module for specific terminal assignments.
4. ການຕິດຕັ້ງທີ່ປອດໄພ: Use the provided mounting hardware to securely attach the thermostat to the wall.

5.2 ການຕິດຕັ້ງເບື້ອງຕົ້ນ

1. ເປີດ: Restore power to the system at the circuit breaker. The thermostat display should illuminate.
2. Software Version Check: Upon initial power-up, the software version will briefly display.
3. ຫົວໜ່ວຍອຸນຫະພູມ: If necessary, adjust the temperature unit between Celsius and Fahrenheit according to the operating instructions in Section 6.
4. ການຕັ້ງຄ່າເຊັນເຊີ: If using optional floor, remote, or outdoor sensors, ensure they are correctly connected and configured within the Smatrix Base X-145 control module. The thermostat can display readings from these sensors.

6. ການດໍາເນີນງານ

The Uponor Smatrix Base T-145 thermostat provides straightforward control over your room's temperature.

6.1 ການຕັ້ງອຸນຫະພູມ

• Rotate the central dial clockwise to increase the desired temperature.
• Rotate the central dial counter-clockwise to decrease the desired temperature.
• The digital display will show the set temperature. The backlight will activate for 10 seconds after adjustment.

6.2 ຂໍ້ມູນການສະແດງ

• ອຸນຫະພູມປະຈຸບັນ: The main display shows the current room temperature.
• ຕັ້ງຄ່າອຸນຫະພູມ: Briefly displayed when adjusting the dial.
• ຮູບແບບການເຮັດວຽກ: An icon or text indicates if the system is currently heating or cooling.
• Setback Indicator: If the setback function is active, an indicator will show, along with the setback temperature.
• ສະຖານະຫມໍ້ໄຟ: Displays the status of any internal backup battery or connected sensor batteries.

6.3 Changing Temperature Units (Celsius/Fahrenheit)

Specific instructions for changing temperature units are typically found in the main Smatrix Base X-145 control module manual or accessed via a combination of button presses on the thermostat. Consult the comprehensive system manual for detailed steps.

7. ບໍາລຸງຮັກສາ

The Uponor Smatrix Base T-145 thermostat requires minimal maintenance to ensure optimal performance.

• ທໍາຄວາມສະອາດ: Periodically wipe the thermostat's exterior with a soft, dry, or slightly damp cloth. Do not use harsh chemicals, abrasive cleaners, or excessive moisture.
• ກວດເຊັກເຊັນເຊີ: If using external sensors (floor, remote, outdoor), ensure they are free from obstructions and debris that could affect their readings.
• ກວດສອບລະບົບ: Regularly check the overall heating/cooling system for proper operation as per the Smatrix Base X-145 control module manual.

8. ການແກ້ໄຂບັນຫາ

If you encounter issues with your Uponor Smatrix Base T-145 thermostat, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, contact Uponor customer support or a qualified HVAC technician.

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information, technical support, or service inquiries regarding your Uponor Smatrix Base T-145 Wired Room Thermostat, please refer to the documentation included with your complete Uponor Smatrix system or visit the official Uponor webເວັບໄຊ. ຮັກສາຫຼັກຖານການຊື້ຂອງທ່ານສໍາລັບການຮ້ອງຂໍການຮັບປະກັນ.

ຜູ້ຜະລິດ: Uponor

ໝາຍເລກຕົວແບບ: 1086974

ASIN: B077CLZPJ8