1. ບົດແນະນຳ
This manual provides comprehensive instructions for the Blackstar HT Club 40 Mark II 40-Watt 1x12 Tube Combo Amp. It covers essential information for setup, operation, maintenance, and troubleshooting, ensuring optimal performance and longevity of your amplifier. The HT Club 40 Mark II features revoiced clean and overdrive channels, Blackstar's Infinite Shape Feature (ISF), two reverb textures, and a speaker-emulated output.
Please read this manual thoroughly before operating your amplifier to ensure safe and correct usage.
2. ຄໍາແນະນໍາຄວາມປອດໄພທີ່ສໍາຄັນ
- ອ່ານຄໍາແນະນໍາ: ຮັກສາຄູ່ມືນີ້ໄວ້ສໍາລັບການອ້າງອີງໃນອະນາຄົດ.
- ຄຳເຕືອນໃຫ້ລະວັງ: Follow all warnings on the amplifier and in this manual.
- ນ້ຳ ແລະ ຄວາມຊຸ່ມ: ຫ້າມໃຊ້ອຸປະກອນນີ້ໃກ້ກັບນໍ້າ ຫຼື ປ່ອຍໃຫ້ມັນຕົກ ຫຼື ກະແຈກກະຈາຍ.
- ຄວາມຮ້ອນ: ຫ້າມຕິດຕັ້ງໃກ້ກັບແຫຼ່ງຄວາມຮ້ອນເຊັ່ນລັງສີ, ເຄື່ອງບັນທຶກຄວາມຮ້ອນ, ເຕົາຫຼືອຸປະກອນອື່ນໆ (ລວມທັງ. amplifiers) ທີ່ຜະລິດຄວາມຮ້ອນ.
- ສາຍໄຟ: ປົກປ້ອງສາຍໄຟຈາກການຖືກເປີດ ຫຼື ສຽບ.
- ການບໍລິການ: ອ້າງອີງການບໍລິການທັງໝົດໃຫ້ກັບພະນັກງານບໍລິການທີ່ມີຄຸນວຸດທິ. ການບໍລິການແມ່ນຕ້ອງການເມື່ອອຸປະກອນໄດ້ຮັບຄວາມເສຍຫາຍໃນທາງໃດກໍ່ຕາມເຊັ່ນ: ສາຍໄຟຫຼືປລັກສຽບຖືກເສຍຫາຍ, ແຫຼວຮົ່ວໄຫຼຫຼືສິ່ງຂອງຕົກເຂົ້າໄປໃນອຸປະກອນ, ອຸປະກອນຖືກຝົນຫຼືຄວາມຊຸ່ມຊື່ນ, ບໍ່ເຮັດວຽກຕາມປົກກະຕິ. , ຫຼືໄດ້ຖືກຫຼຸດລົງ.
- ການລະບາຍອາກາດ: Do not block any ventilation openings. Ensure proper airflow around the ampມີຊີວິດຊີວາ.
- ການຕໍ່ດິນ: ນີ້ amplifier must be grounded. Do not defeat the safety purpose of the polarized or grounding-type plug.
- ທໍ່: ທໍ່ amplifiers operate at high voltages and generate significant heat. Do not attempt to replace tubes or service the internal components unless you are a qualified technician.
3. ຜະລິດຕະພັນເກີນview
3.1 ແຜງຄວບຄຸມດ້ານໜ້າ
The front panel provides access to all primary controls for shaping your amplifier's tone.
ຮູບພາບ: ທາງຫນ້າ view of the Blackstar HT Club 40 Mark II ampຮູບພາບນີ້ສະແດງໃຫ້ເຫັນ amplifier's front face, including the Blackstar logo, speaker grille, and the entire control panel at the top. The control panel features input jacks, various knobs for Clean and Overdrive channels, EQ settings, Reverb, Master Volume, and Power/Standby switches.
- ປ້ອນຂໍ້ມູນ: ຊ່ອງສຽບຂະໜາດ 1/4" ສຳລັບເຊື່ອມຕໍ່ກີຕ້າຂອງທ່ານ.
- ຊ່ອງທີ່ສະອາດ:
- ປະລິມານ: Controls the overall output level of the clean channel.
- ເບດ, ສຽງດັງ: Tone controls for the clean channel.
- ສະຫຼັບສຽງ: Alters the clean channel's voicing for different tonal characteristics.
- Overdrive Channel:
- ໄດ້ຮັບ: Controls the amount of overdrive/distortion.
- ປະລິມານ: Controls the overall output level of the overdrive channel.
- Bass, ກາງ, ສຽງດັງ: Tone controls for the overdrive channel.
- ISF (ຄຸນສົມບັດຮູບຮ່າງທີ່ບໍ່ມີຂອບເຂດ): Sweeps between a 'British' and 'American' amplifier tone.
- ສະຫຼັບສຽງ: Alters the overdrive channel's voicing.
- ຄຳກິລິຍາ: ຄວບຄຸມລະດັບຂອງຜົນກະທົບ reverb ດິຈິຕອນໃນຕົວ.
- ປະລິມານໂທ: ຄວບຄຸມປະລິມານຜົນຜະລິດໂດຍລວມຂອງ ampມີຊີວິດຊີວາ.
- ສະຫຼັບສະແຕນບາຍ: Places the amplifier in standby mode, allowing tubes to warm up or cool down without signal passing through.
- ສັບປ່ຽນພະລັງງານ: ຫັນ ampຊີວິດເປີດຫຼືປິດ.
3.2 ການເຊື່ອມຕໍ່ແຜງດ້ານຫລັງ
The rear panel provides various input and output connections for external devices and speaker configurations.
ຮູບພາບ: ດ້ານຫລັງ view of the Blackstar HT Club 40 Mark II amplifier. This image shows the back of the amplifier, detailing the mains input, fuse holder, speaker outputs, emulated output, effects loop (send/return), footswitch input, and USB audio port.
- ການປ້ອນຂໍ້ມູນເຂົ້າ: ສຳລັບເຊື່ອມຕໍ່ສາຍໄຟທີ່ສະໜອງໃຫ້.
- HT Fuse: Main power fuse. Ensure correct rating is used for replacement.
- ລຳ ໂພງອອກ: Connections for external speaker cabinets. Ensure correct impedance matching (1x16 Ohm, 1x8 Ohm, 2x16 Ohm).
- Emulated Output: Provides a speaker-emulated signal for direct recording or connection to a PA system.
- Effects Loop (Send/Return): For connecting external effects pedals or processors.
- ສະຫຼັບຕີນ: Input for the supplied 2-way footswitch to switch channels and reverb.
- ສຽງ USB: For direct recording to a computer.
4. ຕັ້ງຄ່າ
4.1 ການຫຸ້ມຫໍ່ແລະການຈັດວາງ
ລະມັດລະວັງເອົາ ampລ້າງອອກຈາກການຫຸ້ມຫໍ່ຂອງມັນ. ວາງ amplifier on a stable, level surface, ensuring adequate ventilation around the unit. Avoid placing it near heat sources or in direct sunlight.
4.2 ການເຊື່ອມຕໍ່ພະລັງງານ
- ຮັບປະກັນ amplifier's power switch is in the 'OFF' position and the standby switch is in 'STANDBY'.
- Connect the supplied mains power cable to the 'Mains Input' on the rear panel and then to a suitable grounded power outlet.
4.3 Connecting Your Instrument and Speakers
- Connect your guitar to the 'Input' jack on the front panel using a high-quality instrument cable.
- If using an external speaker cabinet, connect it to the appropriate 'Speaker Outputs' on the rear panel, ensuring correct impedance matching. The internal speaker is 16 Ohm.
- For silent practice or recording, connect to the 'Emulated Output' or 'USB Audio' as needed.
5. ຄໍາແນະນໍາການດໍາເນີນງານ
5.1 ເປີດ ແລະ ປິດ
- ເປີດ: With the standby switch in 'STANDBY', turn the 'Power' switch to 'ON'. Allow approximately 2-3 minutes for the tubes to warm up.
- After the warm-up period, switch the 'Standby' switch to 'ON' to activate the ampມີຊີວິດຊີວາ.
- ປິດພະລັງງານ: Switch the 'Standby' switch to 'STANDBY'.
- Turn the 'Power' switch to 'OFF'.
5.2 ການເຮັດວຽກຂອງຊ່ອງທາງ
- ຊ່ອງທີ່ສະອາດ: Use the 'Volume', 'Bass', and 'Treble' controls to dial in your desired clean tone. The 'Voice' switch provides additional tonal options.
- Overdrive Channel: Engage the overdrive channel using the footswitch or the front panel switch. Adjust 'Gain' for distortion level, 'Volume' for channel output, and 'Bass', 'Middle', 'Treble' for EQ. The 'ISF' control allows continuous blending between British and American amplifier characteristics. The 'Voice' switch offers further tonal variations.
5.3 Reverb and Master Volume
- ຄຳກິລິຍາ: Adjust the 'Reverb' knob to control the amount of digital reverb applied to your sound.
- ປະລິມານໂທ: This control sets the overall output level of the amplifier, affecting both channels.
5.4 Emulated Output and USB Audio
- Emulated Output: Connect to a mixing console or recording interface for a speaker-emulated signal. This is useful for direct recording or live sound reinforcement without miking the speaker.
- ສຽງ USB: Connect to your computer via a USB cable for direct digital recording. Refer to Blackstar's website for driver installation and software compatibility.
5.5 ການຫຼຸດຜ່ອນພະລັງງານ
The HT Club 40 Mark II features a power reduction option, allowing you to switch between 40 Watts and 4 Watts output. This is ideal for achieving saturated tube tones at lower volumes for home practice or smaller venues. Consult the amplifier's specific controls for engaging this feature, typically found on the rear panel or via a dedicated switch.
6. ບໍາລຸງຮັກສາ
6.1 ການທໍາຄວາມສະອາດ
ອະນາໄມ amplifier's exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the ampເຄື່ອງດູດອາກາດຖືກຖອດປລັກອອກກ່ອນທຳຄວາມສະອາດ.
6.2 ການປ່ຽນທໍ່
Vacuum tubes have a finite lifespan and will eventually need replacement. Symptoms of worn tubes include reduced output, loss of tone, or excessive noise. Due to high internal voltages and the need for proper biasing, tube replacement and biasing should only be performed by a qualified service technician. Incorrect biasing can lead to premature tube failure and damage to the ampມີຊີວິດຊີວາ.
6.3 ການເບິ່ງແຍງທົ່ວໄປ
- ຫຼີກເວັ້ນການເປີດເຜີຍ amplifier ກັບອຸນຫະພູມສູງສຸດຫຼືຄວາມຊຸ່ມຊື່ນ.
- ຂົນສົ່ງ amplifier carefully to prevent physical damage.
- Always use appropriate speaker cables for connections; never use instrument cables for speakers.
7. ການແກ້ໄຂບັນຫາ
If you experience issues with your Blackstar HT Club 40 Mark II, consult the following table. For problems not listed or if issues persist, contact qualified service personnel.
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ບໍ່ມີສຽງ | Power not on, standby engaged, faulty cable, speaker disconnected, faulty tube. | Ensure power is on and standby is disengaged. Check all cables. Verify speaker connection. Consult technician for tube issues. |
| ສຽງອ່ອນ ຫຼືບິດເບືອນ | Worn tubes, incorrect settings, faulty instrument/cable. | Check gain and volume settings. Test with a different instrument/cable. Consult technician for tube inspection/replacement. |
| Excessive hum or noise | Ground loop, faulty power supply, proximity to interference, worn tubes. | Ensure proper grounding. Try a different power outlet. Move away from other electronic devices. Consult technician for tube or internal component issues. |
| Scratchy knobs/pots | Dust or wear in potentiometers. | This can sometimes be resolved with specialized contact cleaner, but often indicates wear. If persistent, professional servicing may be required. |
| Overdrive gain jumpy/unresponsive | Faulty potentiometer or circuit issue. | This indicates a component fault. Professional servicing is required. |
8. ຂໍ້ມູນຈໍາເພາະ
Detailed technical specifications for the Blackstar HT Club 40 Mark II ampມີຊີວິດຊີວາ.
Image: Dimensions of the Blackstar HT Club 40 Mark II amplifier. The image shows the amplifier from an angled perspective with arrows and numerical labels indicating its width (29.13"), height (24.8"), and depth (14.96").
| ຄຸນສົມບັດ | ຂໍ້ມູນຈໍາເພາະ |
|---|---|
| ໝາຍເລກຕົວແບບ | 056309 |
| ຜົນຜະລິດວັດtage | 40 Watts (switchable to 4 Watts) |
| ລໍາໂພງ | 1x12 ນິ້ວ |
| ຊ່ອງ | 2 (ສະອາດ, ໂອເວີໄດຣຟ໌) |
| ການຄວບຄຸມ | Volume, Bass, Treble (Clean); Gain, Volume, Bass, Middle, Treble, ISF (Overdrive); Reverb Level, Master Volume |
| ຜົນກະທົບ | Digital Reverb, Effects Loop |
| ການເຊື່ອມຕໍ່ | Guitar Input, Speaker Outputs (1x16 Ohm, 1x8 Ohm, 2x16 Ohm), Emulated Output, Footswitch, USB Audio |
| ຂະໜາດສິນຄ້າ (L x W x H) | 14.96 x 29.13 x 24.8 ນິ້ວ |
| ນ້ໍາຫນັກລາຍການ | 62.5 ປອນ |
| ອຸປະກອນທີ່ເຂົ້າກັນໄດ້ | ກີຕ້າ |
| ວັດສະດຸ | Lead (Note: This refers to internal components, not external casing) |
| ຜູ້ຜະລິດ | Blackstar |
| ວັນທີທໍາອິດທີ່ມີ | ວັນທີ 1 ພະຈິກ 2017 |
9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
Blackstar products are manufactured to the highest standards. For information regarding warranty coverage, terms, and conditions, please refer to the warranty card included with your product or visit the official Blackstar Ampການຈົດທະບຽນ webເວັບໄຊ.
For technical support, service inquiries, or to locate an authorized service center, please visit the Blackstar Amplification official website or contact their customer support directly. Always provide your product model number (056309) and serial number when seeking support.
Blackstar Amplification Official Webເວັບໄຊ: www.blackstaramps.com
