AUTOOL BT360 12V Battery Load Tester Instruction Manual

1. ບົດແນະນຳ

The AUTOOL BT360 is a 12V battery load tester designed to analyze the health status of automotive batteries. It performs battery tests, cranking tests, and charging system tests, providing accurate results for various battery types including regular flooded, AGM flat plate, AGM spiral, and Gel batteries. This manual provides detailed instructions for the proper use and maintenance of your BT360 tester.

2. ຂໍ້ມູນຄວາມປອດໄພ

Always observe the following safety precautions when using the AUTOOL BT360 battery tester:

• Wear appropriate eye protection and protective clothing when working near batteries.
• ໃຫ້ແນ່ໃຈວ່າລົດຢູ່ໃນພື້ນທີ່ລະບາຍອາກາດໄດ້ດີ.
• Avoid sparks, flames, and smoking near the battery, as batteries can produce explosive gases.
• Do not touch hot engine parts or moving components.
• Keep the tester and cables away from water, oil, and grease.
• ຮັບປະກັນ cl ຂອງແບັດເຕີຣີamps are securely connected to the correct terminals (red to positive, black to negative).
• If battery acid comes into contact with skin or eyes, flush immediately with plenty of water and seek medical attention.

3. ຜະລິດຕະພັນເກີນview

3.1 ອົງປະກອບ

The AUTOOL BT360 package typically includes:

• AUTOOL BT360 Main Unit
• Integrated Testing Cables with Alligator Clamps (ສີແດງສໍາລັບທາງບວກ, ສີດໍາສໍາລັບການລົບ)
• ຄູ່ມືຜູ້ໃຊ້ (ເອກະສານນີ້)

Image 3.1: AUTOOL BT360 Battery Tester and its included accessories.

3.2 Tester Unit

ຮູບພາບ 3.2: ດ້ານຫນ້າ view of the AUTOOL BT360 Battery Tester, showing the display and control buttons.

The main unit features an LCD display and four control buttons:

• ESC: Escape/Back button.
• ENT: Enter/Confirm button.
• ລູກສອນຂຶ້ນ/ລົງ: Navigation buttons for menu selection.

3.3 ລັກສະນະທີ່ສໍາຄັນ

• Performs Battery Test, Cranking Test, and Charging Test.
• Supports multiple battery types: Regular Flooded, AGM Flat Plate, AGM Spiral, and Gel.
• Wide CCA testing range: 100-2400 CCA.
• Multi-language support for user interface.

Image 3.3: The AUTOOL BT360 supports multiple languages for its user interface.

4. ຂໍ້ມູນຈໍາເພາະ

Image 4.1: Physical dimensions of the AUTOOL BT360 Battery Tester.

4.1 Supported Starting Power Supply Standards

Image 4.2: Table showing various starting power supply standards supported by the BT360.

5. ຕັ້ງຄ່າ

5.1 ການຫຸ້ມຫໍ່

Carefully remove the AUTOOL BT360 tester and all accessories from the packaging. Inspect for any signs of damage. If any components are missing or damaged, contact customer support.

5.2 ການເຊື່ອມຕໍ່ຕົວທົດສອບ

The BT360 is powered directly by the vehicle's 12V battery. Follow these steps to connect the tester:

1. ກວດໃຫ້ແນ່ໃຈວ່າການຕິດໄຟຂອງລົດຖືກປິດ ແລະອຸປະກອນເສີມທັງໝົດຖືກປິດໄວ້.
2. ເຊື່ອມ​ຕໍ່ ສີແດງ ບວກ (+) clamp to the positive (+) terminal of the 12V battery.
3. ເຊື່ອມ​ຕໍ່ ສີດໍາ ລົບ (-) clamp ໄປຫາຂົ້ວລົບ (-) ຂອງແບັດເຕີຣີ 12V.
4. Once connected, the tester will power on automatically.

Image 5.1: The AUTOOL BT360 tester with its integrated testing cables and clamps.

Image 5.2: The BT360 tester connected to a vehicle battery for testing.

6. ຄໍາແນະນໍາການດໍາເນີນງານ

After connecting the tester, the main menu will appear. Use the Up/Down arrow buttons to navigate through options and the ENT button to confirm selections. Use the ESC button to go back to the previous screen.

Image 6.1: Various display screens of the AUTOOL BT360, illustrating menu navigation and test result displays.

6.1 ການທົດສອບຫມໍ້ໄຟ

This function evaluates the overall health of the battery.

1. ຈາກເມນູຫລັກ, ເລືອກ ການທົດສອບຫມໍ້ໄຟ and press ENT.
2. ເລືອກ ສະຖານທີ່ຫມໍ້ໄຟ: Choose 'In-Vehicle' if the battery is installed in the car, or 'Out-of-Vehicle' if it's removed. Press ENT.
3. ເລືອກ ປະເພດຫມໍ້ໄຟ: Choose the type that matches your battery (e.g., Regular Flooded, AGM Flat Plate, AGM Spiral, Gel). Press ENT.
4. ເລືອກ ມາດຕະຖານການທົດສອບ: Choose the standard specified on your battery (e.g., CCA, JIS, DIN). Press ENT.
5. ຕັ້ງ ການໃຫ້ຄະແນນແບັດເຕີຣີ: Input the CCA value (or equivalent rating) as indicated on your battery label. Use arrow buttons to adjust the value and ENT to confirm.
6. The tester will perform the analysis and display results such as State of Health (SOH), State of Charge (SOC), voltage, internal resistance, and a recommendation (e.g., 'Good Battery', 'Charge', 'Replace').

6.2 ການທົດສອບ Cranking

This test analyzes the vehicle's starting system, including the starter motor.

1. ຈາກເມນູຫລັກ, ເລືອກ ການທົດສອບ Cranking and press ENT.
2. Follow the on-screen prompts to start the vehicle. The tester will monitor the battery voltage ໃນລະຫວ່າງການ cranking.
3. Once the test is complete, the display will show cranking voltage, cranking time, and a diagnosis of the starting system's performance.

6.3 Charging Test

This test evaluates the vehicle's charging system, including the alternator and regulator.

1. ຈາກເມນູຫລັກ, ເລືອກ ການທົດສອບການສາກໄຟ and press ENT.
2. Follow the on-screen prompts to rev the engine to a specified RPM (e.g., 2500 RPM for 5 seconds).
3. The tester will measure the charging voltage under load and no-load conditions.
4. The results will indicate the charging system's output, ripple voltage, and overall health (e.g., 'Good', 'Low Output', 'High Output').

7. ບໍາລຸງຮັກສາ

To ensure the longevity and accuracy of your AUTOOL BT360 tester:

• Clean the tester with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• ຮັກສາຫມໍ້ໄຟ clamps ສະອາດແລະບໍ່ມີ corrosion.
• Store the tester in a dry, cool place, away from direct sunlight and extreme temperatures.
• ຫຼີກລ້ຽງການວາງອຸປະກອນລົງ ຫຼືຖືກຜົນກະທົບທີ່ຮຸນແຮງ.

8. ການແກ້ໄຂບັນຫາ

If you encounter issues with your AUTOOL BT360, refer to the following common problems and solutions:

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official AUTOOL webເວັບໄຊ. ຮັກສາໃບຮັບເງິນການຊື້ຂອງທ່ານໄວ້ເປັນຫຼັກຖານການຊື້ສໍາລັບການຮ້ອງຂໍການຮັບປະກັນ.

ຜູ້ຜະລິດ: ອັດຕະໂນມັດ

ວັນທີທໍາອິດທີ່ມີ: ວັນທີ 27 ຕຸລາ 2017