Adler AD 1186 LED Clock with Thermometer User Manual

ແນະນຳ

This manual provides comprehensive instructions for the setup, operation, and maintenance of your Adler AD 1186 LED Clock with Thermometer. Please read this manual thoroughly before using the device to ensure proper function and longevity.

ຄໍາແນະນໍາຄວາມປອດໄພ

• ໃຫ້ແນ່ໃຈວ່າອຸປະກອນຖືກວາງຢູ່ເທິງພື້ນຜິວທີ່ຮາບພຽງ.
• ຢ່າເຮັດໃຫ້ອຸປະກອນຢູ່ໃນອຸນຫະພູມທີ່ຮຸນແຮງ, ແສງແດດໂດຍກົງ, ຫຼືຄວາມຊຸ່ມຊື່ນສູງ.
• ຮັກສາອຸປະກອນໃຫ້ຫ່າງຈາກນ້ໍາຫຼືຂອງແຫຼວອື່ນໆ.
• ໃຊ້ພຽງແຕ່ອະແດັບເຕີພະລັງງານທີ່ລະບຸໄວ້.
• ຢ່າພະຍາຍາມຖອດປະກອບ ຫຼືສ້ອມແປງອຸປະກອນດ້ວຍຕົນເອງ. ຕິດຕໍ່ພະນັກງານບໍລິການທີ່ມີຄຸນວຸດທິສໍາລັບການຊ່ວຍເຫຼືອ.
• ຮັກສາໃຫ້ໄກຈາກເດັກນ້ອຍ.

ເນື້ອໃນຊຸດ

ກະລຸນາກວດເບິ່ງຊຸດສຳລັບລາຍການຕໍ່ໄປນີ້:

• Adler AD 1186 LED Clock with Thermometer
• Power Adapter
• ຄູ່ມືຜູ້ໃຊ້ (ເອກະສານນີ້)

ສິນຄ້າເກີນview

Familiarize yourself with the components of your Adler AD 1186 LED Clock.

ຮູບ 1: ດ້ານຫນ້າ View. This image shows the front of the Adler AD 1186 LED Clock. The large LED display clearly shows the time (e.g., 20:18), humidity percentage (e.g., 30% RH), and temperature in Celsius (e.g., 21°C). The Adler logo is visible below the time display.

ຮູບທີ 2: ແຜງຄວບຄຸມເທິງສຸດ. This image provides a top-down angled view of the clock, highlighting the control buttons. From left to right, buttons include "SETTING", "TIME", "DATE", "ALARM", "SNOOZE" (large central button), "UP", "DOWN", and "DATE". These buttons are used for configuring the clock's various functions.

ຮູບທີ 3: ແຜງດ້ານຫຼັງ. This image displays the back of the Adler AD 1186 LED Clock. It shows the power input port for the adapter and a compartment for battery backup, ensuring timekeeping during power outages.

ອົງ​ປະ​ກອບ​ທີ່​ສໍາ​ຄັນ​:

• ຈໍສະແດງຜົນ LED: Shows time, temperature, and humidity.
• ປຸ່ມຄວບຄຸມ: Located on the top panel for setting time, date, alarm, and adjusting settings.
• ການປ້ອນຂໍ້ມູນພະລັງງານ: ສໍາລັບການເຊື່ອມຕໍ່ອະແດບເຕີ AC.
• ຊ່ອງໃສ່ຫມໍ້ໄຟ: For backup batteries (type not specified, typically AAA or button cell).

ຕັ້ງຄ່າ

1. ແກະກ່ອງ: Carefully remove the clock and all accessories from the packaging.
2. ການເຊື່ອມຕໍ່ພະລັງງານ: Connect the provided power adapter to the DC input port on the back of the clock (refer to Figure 3). Plug the adapter into a standard electrical outlet. The LED display should illuminate.
3. ແບັດເຕີຣີສຳຮອງ (ບໍ່ຈຳເປັນແຕ່ແນະນຳ): Open the battery compartment on the rear of the clock. Insert the required backup batteries (e.g., 2x AAA, not included) according to the polarity markings. This will maintain time settings during power interruptions.

ຄໍາແນະນໍາການດໍາເນີນງານ

1. ກໍານົດເວລາແລະວັນທີ

1. ກົດ TIME button (refer to Figure 2). The hour digits will start flashing.
2. ໃຊ້ UP ແລະ ລົງ ປຸ່ມເພື່ອປັບຊົ່ວໂມງ.
3. ກົດ TIME again to confirm the hour and move to minute adjustment. The minute digits will flash.
4. ໃຊ້ UP ແລະ ລົງ ປຸ່ມເພື່ອປັບນາທີ.
5. ກົດ TIME ອີກເທື່ອຫນຶ່ງເພື່ອຢືນຢັນນາທີ.
6. To set the date, press the DATE button. The year will flash.
7. ໃຊ້ UP ແລະ ລົງ to set the year, then press DATE to move to month, and then day.
8. ກົດ DATE again to exit date setting mode.

2. ຕັ້ງຄ່າປຸກ

1. ກົດ ປຸກ button (refer to Figure 2). The alarm hour digits will flash.
2. ໃຊ້ UP ແລະ ລົງ ປຸ່ມເພື່ອຕັ້ງໂມງປຸກທີ່ຕ້ອງການ.
3. ກົດ ປຸກ again to confirm the hour and move to minute adjustment. The alarm minute digits will flash.
4. ໃຊ້ UP ແລະ ລົງ ປຸ່ມເພື່ອກໍານົດນາທີປຸກທີ່ຕ້ອງການ.
5. ກົດ ປຸກ ອີກຄັ້ງເພື່ອເປີດໃຊ້ງານໂມງປຸກ. ໄອຄອນໂມງປຸກຈະປາກົດຢູ່ເທິງຈໍສະແດງຜົນ.
6. ເພື່ອປິດການໃຊ້ງານໂມງປຸກ, ກົດປຸ່ມ ປຸກ ກົດປຸ່ມຈົນກ່ວາໄອຄອນປຸກຈະຫາຍໄປ.

3. ຟັງຊັນ Snooze

ເມື່ອສຽງປຸກດັງຂຶ້ນ, ກົດປຸ່ມໃຫຍ່ ງອກ button (refer to Figure 2) to temporarily silence the alarm. The alarm will sound again after a few minutes (default snooze time is typically 5-9 minutes, refer to specific product details if available).

4. ການປັບຄວາມສະຫວ່າງ

The clock features 2 brightness levels. Press the ການຕັ້ງຄ່າ button (or a dedicated brightness button if present, otherwise cycle through settings) to cycle between the brightness levels. Adjust to your preferred visibility.

5. ການສະແດງອຸນຫະພູມ ແລະ ຄວາມຊຸ່ມຊື່ນ

The clock automatically displays the current room temperature and humidity. No special setting is required for this function. The temperature is displayed in Celsius (°C) and humidity as a percentage (% RH).

ບໍາລຸງຮັກສາ

• ທໍາຄວາມສະອາດ: ໃຊ້ຜ້າອ່ອນໆແຫ້ງເພື່ອທຳຄວາມສະອາດພື້ນຜິວຂອງໂມງ. ຢ່າໃຊ້ນໍ້າຢາທຳຄວາມສະອາດທີ່ມີສານຂັດ ຫຼື ສານລະລາຍ.
• ຂີ້ຝຸ່ນ: Regularly dust the device to prevent accumulation, especially around vents if any.
• ການປ່ຽນແບັດເຕີຣີ: If using battery backup, replace batteries annually or when the display shows signs of dimming during power outages.

ການແກ້ໄຂບັນຫາ

ຂໍ້ມູນຈໍາເພາະ

ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

Adler products are designed for reliability and performance. For warranty information, please refer to the warranty card included with your purchase or visit the official Adler website. For technical support or service inquiries, please contact Adler customer service through their official channels.

ກະລຸນາຮັກສາຫຼັກຖານການຊື້ຂອງທ່ານສໍາລັບການຮຽກຮ້ອງການຮັບປະກັນ.