1. ບົດແນະນຳ
This manual provides detailed instructions for the installation, operation, and maintenance of your AMX 42" Under Cabinet Fluorescent Light Fixture, Model UC-42-WT. Please read this manual thoroughly before installation and retain it for future reference.
The AMX UC-42-WT is an energy-efficient fluorescent light fixture designed for under-cabinet applications, providing 4000K white light. It features a durable metal body, a polycarbonate lens, and convenient side and rear knockouts for wiring.
ຮູບພາບ 1.1: ດ້ານຫນ້າ view of the AMX 42" Under Cabinet Fluorescent Light Fixture.
2. ຂໍ້ມູນຄວາມປອດໄພ
WARNING: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installing or servicing.
- ອ່ານຄໍາແນະນໍາທັງຫມົດຢ່າງລະອຽດກ່ອນທີ່ຈະເລີ່ມຕົ້ນການຕິດຕັ້ງ.
- Ensure the electrical supply is disconnected before handling the fixture.
- All wiring connections must be made in accordance with local and national electrical codes. If you are unsure about wiring, consult a qualified electrician.
- Do not install this fixture near any heat source or in areas with excessive moisture.
- fixture ນີ້ຖືກອອກແບບມາສໍາລັບການນໍາໃຊ້ພາຍໃນເຮືອນເທົ່ານັ້ນ.
- ບໍ່ໃຫ້ເກີນ watt ທີ່ກໍານົດໄວ້tage ສໍາລັບການທົດແທນຫລອດໄຟ.
3. ເນື້ອໃນຊຸດ
ກວດສອບວ່າອົງປະກອບທັງຫມົດແມ່ນມີຢູ່ກ່ອນທີ່ຈະເລີ່ມຕົ້ນການຕິດຕັ້ງ:
- AMX 42" Under Cabinet Fluorescent Light Fixture (UC-42-WT)
- Diffuser (Shade)
- Remote Control (if included with specific model variant)
- ຮາດແວຕິດຕັ້ງ (ສະກູ, ສະມໍ)
- ຄູ່ມືການສອນ
4. ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ຂໍ້ມູນຈໍາເພາະ |
|---|---|
| ຕົວແບບ | UC-42-WT (also LED-UCW-42-WT) |
| ຂະໜາດ (L x W x H) | 42" x 5" x 1" |
| ວັດtage | 26 Watts (Maximum Compatible Wattage) |
| ອຸນຫະພູມສີ | 4000 Kelvin |
| ປະເພດແຫຼ່ງແສງ | ທໍ່ຫລອດໄຟ |
| Bulb Base | G13 |
| ສະບັບtage | 120 ໂວນ |
| ວັດສະດຸ | Metal body, Polycarbonate lens |
| ສີ | ສີຂາວ |
| ປະເພດການຕິດຕັ້ງ | ພາຍໃຕ້ Cabinet |
| ການຢັ້ງຢືນ | ລາຍຊື່ ETL |
| ຄຸນນະສົມບັດພິເສດ | ພະລັງງານປະສິດທິພາບ |
Image 4.1: Product dimensions showing length, width, and height.
5. ການຕິດຕັ້ງ
5.1 ເຄື່ອງມືທີ່ຕ້ອງການ
- Screwdriver (Phillips ແລະ/ຫຼື Flathead)
- ເຈາະດ້ວຍເຄື່ອງເຈາະທີ່ເຫມາະສົມ
- ສາຍລວດ
- ສໍ
- ເທບວັດແທກ
- ແວ່ນຕາຄວາມປອດໄພ
5.2 ຄໍາແນະນໍາການຕິດຕັ້ງ
- ຕັດການເຊື່ອມຕໍ່ພະລັງງານ: Before starting, ensure the power supply to the installation area is turned off at the circuit breaker or fuse box.
- ກໍານົດສະຖານທີ່ຕິດຕັ້ງ: Choose a suitable location under the cabinet. Mark the desired mounting points for the fixture. Ensure the location allows for proper wiring access.
- Prepare Wiring Access: The fixture features side and rear knockouts for wiring. Select the most appropriate knockout for your installation and carefully remove it.
Image 5.1: Detail of side and rear knockouts for electrical wiring.
- Secure Fixture: Using the provided mounting hardware, attach the fixture securely to the underside of the cabinet. Ensure it is level and firmly in place.
- ການເຊື່ອມຕໍ່ສາຍ:
- ເຊື່ອມຕໍ່ ສີດໍາ ສາຍຈາກ fixture ກັບ ຮ້ອນ (usually black) wire from the electrical supply.
- ເຊື່ອມຕໍ່ ສີຂາວ ສາຍຈາກ fixture ກັບ ເປັນກາງ (usually white) wire from the electrical supply.
- ເຊື່ອມຕໍ່ ສີຂຽວ or bare copper wire from the fixture to the ດິນ (usually green or bare copper) wire from the electrical supply.
- Use appropriate wire connectors to secure all connections.
- ຕິດຕັ້ງຕົວກະຈາຍ: Snap the polycarbonate diffuser securely into place over the fluorescent tubes. No tools are required for this step.
- ຟື້ນຟູພະລັງງານ: Once all connections are secure and the fixture is assembled, restore power at the circuit breaker.
6. ການດໍາເນີນງານ
The AMX UC-42-WT fluorescent light fixture is designed for straightforward operation.
6.1 ເປີດ/ປິດ
This fixture is typically controlled by a wall switch connected to the electrical circuit. Flip the wall switch to the "ON" position to illuminate the fixture and to the "OFF" position to turn it off.
If your model includes a remote control, refer to the remote control's specific instructions for pairing and operation. The remote control typically allows for power on/off and potentially dimming functions, depending on the model variant.
7. ບໍາລຸງຮັກສາ
ການບຳລຸງຮັກສາເປັນປະຈຳຮັບປະກັນປະສິດທິພາບທີ່ດີທີ່ສຸດ ແລະ ອາຍຸການໃຊ້ງານທີ່ຍາວນານຂອງໂຄມໄຟຂອງທ່ານ.
7.1 ການທໍາຄວາມສະອາດ
- ຕັດການເຊື່ອມຕໍ່ພະລັງງານ: ໃຫ້ປິດແຫຼ່ງຈ່າຍໄຟໃຫ້ກັບອຸປະກອນກ່ອນທຳຄວາມສະອາດສະເໝີ.
- ພາຍນອກ: ເຊັດພາຍນອກຂອງ fixture ອ່ອນໆ, damp cloth. Avoid using abrasive cleaners, solvents, or polishes, as these can damage the finish.
- Diffuser: The polycarbonate diffuser can be removed by gently unsnapping it. Clean it with mild soap and water, then rinse thoroughly and dry completely before reattaching.
7.2 Fluorescent Tube Replacement
When a fluorescent tube reaches the end of its life or fails, it will need to be replaced.
- ຕັດການເຊື່ອມຕໍ່ພະລັງງານ: ປິດການສະໜອງພະລັງງານໃຫ້ກັບອຸປະກອນຢູ່ທີ່ເບຣກເກີ.
- Remove Diffuser: Gently unsnap and remove the polycarbonate diffuser.
- ເອົາທໍ່ເກົ່າອອກ: Carefully twist the fluorescent tube 90 degrees and pull it out of its sockets.
- ຕິດຕັ້ງທໍ່ໃໝ່: Insert the pins of the new G13 base fluorescent tube into the sockets and twist 90 degrees until it locks into place. Ensure the tube is rated for 26 Watts and 4000K color temperature for optimal performance.
- ຕິດຕົວກະຈາຍຄືນໃໝ່: Snap the diffuser back onto the fixture.
- ຟື້ນຟູພະລັງງານ: Turn the power back on at the circuit breaker and test the new tube.
Note: Dispose of old fluorescent tubes according to local regulations, as they may contain mercury.
8. ການແກ້ໄຂບັນຫາ
If you encounter issues with your AMX light fixture, refer to the following common problems and solutions:
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| Fixture ບໍ່ໄດ້ເປີດ. | ບໍ່ມີການສະຫນອງພະລັງງານ. ການເຊື່ອມຕໍ່ສາຍໄຟວ່າງ. Faulty fluorescent tube. | ກວດເບິ່ງເຄື່ອງຕັດວົງຈອນ/ຟິວ. ກວດສອບການເຊື່ອມຕໍ່ສາຍໄຟທັງຫມົດແມ່ນປອດໄພ (ໂດຍການປິດໄຟ). Replace fluorescent tube. |
| ແສງສະຫວ່າງ flickers ຫຼື hums. | ການເຊື່ອມຕໍ່ທໍ່ວ່າງ. Old or failing fluorescent tube. ສະວິດ dimmer ບໍ່ເຂົ້າກັນໄດ້ (ຖ້າມີ). | Ensure tube is firmly seated in sockets. Replace fluorescent tube. Ensure any dimmer switch used is compatible with fluorescent fixtures. |
| ແສງສະຫວ່າງອ່ອນໆ. | Aging fluorescent tube. Dust/dirt on diffuser or tubes. | Replace fluorescent tube. Clean diffuser and tubes. |
If the problem persists after attempting these solutions, consult a qualified electrician or contact AMX customer support.
9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
AMX products are manufactured to high-quality standards. For specific warranty information, please refer to the warranty card included with your purchase or visit the official AMX webເວັບໄຊ. ຮັກສາໃບຮັບເງິນການຊື້ຂອງທ່ານໄວ້ເປັນຫຼັກຖານການຊື້ສໍາລັບການຮ້ອງຂໍການຮັບປະກັນ.
For technical support, replacement parts, or further assistance, please contact AMX customer service through their official channels. Contact information can typically be found on the product packaging or the manufacturer's webເວັບໄຊ.
