ABAC Pole Position 24 Litre

ຄູ່ມືຜູ້ໃຊ້ເຄື່ອງອັດອາກາດ ABAC Pole Position 24 ລິດ

Model: Pole Position 24 Litre | Brand: ABAC

ແນະນຳ

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your ABAC Pole Position 24 Litre Air Compressor. Please read this manual thoroughly before operating the compressor and keep it for future reference.

The ABAC Pole Position 24 Litre Air Compressor is designed for various DIY and light professional tasks, featuring a 24-litre tank, 2 HP (1.5 kW) motor, 220 litres/minute air intake, and a maximum pressure of 10 bar.

ຄໍາແນະນໍາຄວາມປອດໄພ

Always observe the following safety precautions to prevent personal injury or damage to the compressor:

ສ່ວນປະກອບເກີນview

ABAC Pole Position 24 Litre Air Compressor
ຮູບ 1: ເກີນview of the ABAC Pole Position 24 Litre Air Compressor. This image shows the complete compressor unit, including the blue 24-litre tank, the motor and pump assembly on top, pressure gauges, and wheels for portability. A blue handle extends from the back for easy maneuvering.

ຕັ້ງຄ່າ

  1. ການ​ຫຸ້ມ​ຫໍ່​ແລະ​ການ​ກວດ​ກາ​: Carefully remove the compressor from its packaging. Inspect for any visible damage that may have occurred during transit. Report any damage to the supplier immediately.
  2. ສະພາແຫ່ງ (ຖ້າຕ້ອງການ): Attach the wheels and handle using the provided hardware. Ensure all bolts are securely tightened.
  3. Initial Oil Check: Before first use, verify the oil level in the pump. The compressor may be shipped without oil or with a minimal amount. Refer to the oil sight glass or dipstick. If necessary, fill with appropriate compressor oil (typically SAE 30 non-detergent) to the indicated level.
  4. ການຈັດວາງ: Position the compressor on a firm, level surface in a well-ventilated area. Ensure there is adequate space around the unit for air circulation.
  5. ການເຊື່ອມຕໍ່ໄຟຟ້າ: Connect the compressor to a grounded electrical outlet with the correct voltage (230 Volts) and circuit protection. Avoid using extension cords if possible; if necessary, use a heavy-duty, grounded extension cord rated for the compressor's power requirements.

ຄໍາແນະນໍາການດໍາເນີນງານ

  1. ການເລີ່ມຕົ້ນເຄື່ອງອັດອາກາດ:
    • ໃຫ້ແນ່ໃຈວ່າວາວລະບາຍນ້ຳຢູ່ທາງລຸ່ມຂອງຖັງປິດຢູ່.
    • Plug the compressor into the power outlet.
    • Flip the ON/OFF switch to the 'ON' position. The compressor will start to build pressure until it reaches its maximum cut-off pressure (10 bar).
  2. ການປັບຄວາມດັນຜົນຜະລິດ:
    • Turn the pressure regulator knob clockwise to increase pressure and counter-clockwise to decrease pressure.
    • Monitor the regulated pressure gauge to set the desired working pressure for your air tool.
  3. ການເຊື່ອມຕໍ່ເຄື່ອງມືທາງອາກາດ:
    • Attach your air hose to the quick connect coupler.
    • ເຊື່ອມຕໍ່ເຄື່ອງມືອາກາດຂອງທ່ານກັບປາຍອີກດ້ານໜຶ່ງຂອງທໍ່.
  4. ການປິດ:
    • Flip the ON/OFF switch to the 'OFF' position.
    • Unplug the compressor from the power outlet.
    • Depressurize any air remaining in the hose and tool.
  5. Draining Condensation: After each use, or at least daily, open the drain valve at the bottom of the tank to release any accumulated moisture. This prevents rust and extends the tank's lifespan.

ບໍາລຸງຮັກສາ

Regular maintenance ensures optimal performance and longevity of your compressor.

ການແກ້ໄຂບັນຫາ

ບັນຫາສາເຫດທີ່ເປັນໄປໄດ້ການແກ້ໄຂ
Compressor ບໍ່ເລີ່ມຕົ້ນ.ບໍ່ມີກະແສໄຟຟ້າ, ເບກເກີວົງຈອນປິດ, ສະຫຼັບຜິດພາດ.Check power connection, reset breaker, contact service.
Compressor ແລ່ນຢ່າງຕໍ່ເນື່ອງ.ການຮົ່ວໄຫຼຂອງອາກາດ, ສະວິດຄວາມດັນທີ່ຜິດປົກກະຕິ, ຕົວກອງອາກາດອຸດຕັນ.Check for leaks, inspect pressure switch, clean/replace filter.
ຄວາມກົດດັນອາກາດຕໍ່າ.Regulator set too low, air leak, worn pump components.Adjust regulator, check for leaks, contact service.
ສິ່ງລົບກວນຫຼືການສັ່ນສະເທືອນຫຼາຍເກີນໄປ.ອົງປະກອບທີ່ວ່າງ, ແບຣິ່ງທີ່ສວມໃສ່, ນ້ຳມັນເຄື່ອງບໍ່ພຽງພໍ.Tighten fasteners, check oil level, contact service.
ນ້ຳມັນຮົ່ວ.Loose fittings, damaged seals, overfilled oil.Check connections, replace seals, adjust oil level.

If you encounter problems not listed here or if solutions do not resolve the issue, please contact ABAC customer support or a qualified service technician.

ຂໍ້ມູນຈໍາເພາະ

ຍີ່ຫໍ້ABAC
ຊື່ຕົວແບບPole Position 24 Litre
ຄວາມອາດສາມາດຂອງຖັງ24 ລິດ
ພະລັງງານ2 HP (1.5 kW)
ການຮັບອາກາດ220 Litres/minute
ຄວາມກົດດັນສູງສຸດ10 ບາ
ສະບັບtage230 ໂວນ
ລະດັບສຽງ95 dB
ຂະໜາດ (L x W x H)60 x 60 x 26 cm
ນ້ຳໜັກ3 ກິ​ໂລ

ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

ABAC products are manufactured to high quality standards and are guaranteed against manufacturing defects. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official ABAC webເວັບໄຊ.

For technical assistance, spare parts, or service inquiries, please contact your authorized ABAC dealer or customer support. When contacting support, please have your product model and serial number ready.

ທ່ານ​ສາ​ມາດ​ຊອກ​ຫາ​ຂໍ້​ມູນ​ເພີ່ມ​ເຕີມ​ແລະ​ລາຍ​ລະ​ອຽດ​ການ​ຕິດ​ຕໍ່​ກ່ຽວ​ກັບ​ການ​ ABAC Store on Amazon.

ເອກະສານທີ່ກ່ຽວຂ້ອງ - Pole Position 24 Litre

ກ່ອນview ABAC Catalog 2024: ເຄື່ອງອັດອາກາດແບບອຸດສາຫະ ກຳ ແລະຜູ້ໃຊ້ Pro
ສຳຫຼວດ ABAC Catalog 2024 ສຳລັບເຄື່ອງອັດອາກາດ, ເຄື່ອງມື ແລະອຸປະກອນເສີມທີ່ຫຼາກຫຼາຍຂອງອຸດສາຫະກຳ ແລະ ມືອາຊີບ. ຄົ້ນ​ພົບ​ວິ​ທີ​ແກ້​ໄຂ​ສໍາ​ລັບ​ທຸກ​ຄໍາ​ຮ້ອງ​ສະ​ຫມັກ​, ຈາກ piston ແລະ screw compressors ກັບ​ການ​ປິ່ນ​ປົວ​ອາ​ກາດ​ແລະ​ລະ​ບົບ​ການ​ແຈກ​ຢາຍ​.
ກ່ອນview ABAC Spray Gun G-530 ຄູ່ມືຜູ້ໃຊ້ດ່ວນແລະຂໍ້ມູນສະເພາະ
ຄູ່ມືສະຫຼຸບສໍາລັບ ABAC Spray Gun G-530, ກວມເອົາທົ່ວໄປ view, ຂໍ້ກໍານົດດ້ານວິຊາການ, ແລະການປະກາດຄວາມສອດຄ່ອງ. ດາວໂຫລດຄູ່ມືສະບັບເຕັມຈາກ ABAC Air Compressors.
ກ່ອນview ABAC XPN O15 Wall Mounted Air Compressor with Hose Reel - ຄູ່ມືຜູ້ໃຊ້
ຄູ່ມືການນຳໃຊ້ ແລະ ການບຳລຸງຮັກສາແບບຄົບວົງຈອນສຳລັບເຄື່ອງອັດອາກາດຕິດຝາ ABAC XPN O15 ພ້ອມສາຍທໍ່. ຮຽນຮູ້ກ່ຽວກັບການດໍາເນີນງານທີ່ປອດໄພ, ການຕິດຕັ້ງ, ແລະການແກ້ໄຂບັນຫາ.
ກ່ອນview ABAC Greasing Gun G-911 Quick User Guide and Technical Specifications
Concise guide for the ABAC Greasing Gun G-911, including quick usage instructions, detailed technical specifications, and Declaration of Conformity. Features product part identification and operational parameters.
ກ່ອນview ຄູ່ມືຜູ້ໃຊ້ດ່ວນຂອງເຄື່ອງອັດອາກາດ ABAC
ຄູ່ມືຜູ້ໃຊ້ດ່ວນສຳລັບເຄື່ອງອັດອາກາດ ABAC, ໃຫ້ຂໍ້ມູນທີ່ສຳຄັນກ່ຽວກັບທົ່ວໄປ view, ລາຍລະອຽດດ້ານເຕັກນິກ, ແລະ ການປະຕິບັດຕາມຄວາມປອດໄພ. ດາວໂຫຼດຄູ່ມືສະບັບເຕັມສຳລັບຄຳແນະນຳລະອຽດ.
ກ່ອນview Каталог продукции ກຸ່ມ ABAC 2008: Компрессоры, Пневмоинструмент и Системы Воздухоподготовки
Полный каталог продукции ABAC Group за 2008 год, представляющий широкий ассортимент воздушных компрессоротомпрессор воздуха и профессионального пневмоинструмента для различных отраслей.