ໂຄບອລ 4332692973

Kobalt 40-Volt Max 13-inch Cordless String Trimmer Instruction Manual

ແບບ: 4332692973

1. ຂໍ້ມູນຄວາມປອດໄພທີ່ສໍາຄັນ

Always wear safety glasses and other protective gear when using. Keep bystanders at a safe distance to avoid injury from flying debris. Be cautious when starting and operating near people or pets to prevent cut hazards.

  • ອ່ານ ແລະ ເຂົ້າໃຈຄຳແນະນຳທັງໝົດກ່ອນທີ່ຈະນຳໃຊ້ເຄື່ອງມື.
  • ກວດໃຫ້ແນ່ໃຈວ່າໄດ້ສາກແບັດເຕີຣີເຕັມກ່ອນນຳໃຊ້.
  • Inspect the trimmer for any damage before each use.
  • ຮັກສາມືແລະຕີນໃຫ້ຫ່າງຈາກເສັ້ນຕັດ.
  • ຢ່າປະຕິບັດໃນສະພາບທີ່ຊຸ່ມ.

2. ຜະລິດຕະພັນເກີນview

The Kobalt 40-Volt Max 13-inch Cordless String Trimmer is designed for efficient lawn and garden maintenance, particularly for half-acre lawns or less. It features a heavy-duty 0.080-inch dual line with a bump head for easy weed and grass cutting. The trimmer is powered by a 40-volt MAX Li-ion battery, offering up to 40 minutes of runtime with a fully charged 2.5Ah battery. Its variable speed trigger provides two settings for precise control, and it is compatible with other Kobalt 40V MAX products. This model also supports various attachments for increased versatility.

Kobalt 40-Volt Max 13-inch Cordless String Trimmer in use, trimming grass along a concrete edge.
The Kobalt 40-Volt Max 13-inch Cordless String Trimmer effectively cutting grass along a paved edge, demonstrating its precision and power.

3. ຕັ້ງຄ່າ

  1. ການຫຸ້ມຫໍ່: ເອົາສ່ວນປະກອບທັງຫມົດອອກຈາກການຫຸ້ມຫໍ່ຢ່າງລະມັດລະວັງ. ໃຫ້ແນ່ໃຈວ່າທຸກພາກສ່ວນທີ່ລະບຸໄວ້ໃນລາຍການບັນຈຸມີຢູ່.
  2. ການ​ຕິດ​ຕັ້ງ​ຫມໍ້​ໄຟ​: Insert the fully charged 40V MAX Li-ion battery into the battery compartment until it clicks securely into place. To remove, press the release button and slide the battery out.
  3. Adjusting the Auxiliary Handle: Loosen the knob on the auxiliary handle. Adjust the handle to a comfortable position that allows for balanced operation and firm grip. Tighten the knob securely.
  4. Installing the Guard: Attach the debris guard to the trimmer head using the provided fasteners. Ensure it is firmly secured to prevent debris from being thrown towards the operator.

4. ຄໍາແນະນໍາການດໍາເນີນງານ

  1. ການ​ເລີ່ມ​ຕົ້ນ Trimmer ໄດ້​:
    • ໃຫ້ແນ່ໃຈວ່າມີການຕິດຕັ້ງຫມໍ້ໄຟ.
    • ກົດຄ້າງໄວ້ປຸ່ມຄວາມປອດໄພທີ່ຕັ້ງຢູ່ເທິງຈັບ.
    • While holding the safety button, squeeze the variable speed trigger to start the trimmer. Release the safety button once the trimmer is running.
  2. ເຕັກ​ນິກ​ການ​ຕັດ​:
    • ຖື trimmer ແຫນ້ນດ້ວຍມືທັງສອງ.
    • Maintain a comfortable distance from the cutting head.
    • ໃຊ້ການເຄື່ອນໄຫວກວາດ, ຍ້າຍເຄື່ອງຕັດຈາກຂ້າງໄປຂ້າງ, ເພື່ອຕັດຫຍ້າ ແລະ ຫຍ້າ.
    • Avoid hitting hard objects like rocks, fences, or concrete to prevent damage to the line and trimmer.
  3. Advancing Trimmer Line (Bump Head):
    • While the trimmer is running at full speed, gently tap the bump head on a firm, flat surface (e.g., the ground).
    • This action will automatically advance a small amount of cutting line. The line limiter blade on the guard will cut the line to the correct length.
  4. ການ​ຢຸດ Trimmer ໄດ້​: Release the variable speed trigger. The cutting head will stop rotating.

5. ບໍາລຸງຮັກສາ

  • ທໍາຄວາມສະອາດ: After each use, disconnect the battery and clean the trimmer with a damp cloth. Remove any grass, dirt, or debris from the cutting head and air vents. Do not use harsh chemicals.
  • ການປ່ຽນສາຍ: When the trimmer line runs out, refer to the detailed instructions in the full product manual for specific steps on how to reload the bump head with new 0.080-inch trimmer line.
  • ການດູແລຫມໍ້ໄຟ: Store the battery in a cool, dry place away from direct sunlight. Do not store the battery in a discharged state for extended periods.
  • ການເກັບຮັກສາ: Store the trimmer in a dry, secure location, out of reach of children. If storing for an extended period, remove the battery.

6. ການແກ້ໄຂບັນຫາ

ບັນຫາສາເຫດທີ່ເປັນໄປໄດ້ການແກ້ໄຂ
Trimmer ບໍ່ເລີ່ມຕົ້ນBattery not charged or improperly installed; Safety button not pressed; Trigger not squeezed.Ensure battery is charged and correctly inserted. Press safety button before squeezing trigger.
ສາຍ Trimmer ບໍ່ກ້າວໜ້າLine tangled or empty; Bump head not tapped correctly.Check line spool for tangles or replace line. Tap bump head firmly while trimmer is running.
ການຫຼຸດລົງປະສິດທິພາບການຕັດTrimmer line too short or worn; Battery charge low.Advance or replace trimmer line. Recharge battery.
ການສັ່ນສະເທືອນຫຼາຍເກີນໄປDamaged cutting head or unbalanced line.Inspect cutting head for damage. Ensure line is evenly distributed.

7. ຂໍ້ມູນຈໍາເພາະ

ຄຸນສົມບັດລາຍລະອຽດ
ຍີ່ຫໍ້Kobalt
ໝາຍເລກຕົວແບບ4332692973
ແຫຼ່ງພະລັງງານBattery Powered (40-Volt Max)
ຄວາມກວ້າງຂອງການຕັດ13 ນິ້ວ
ເສັ້ນຜ່າສູນກາງເສັ້ນ0.080 inches (dual line)
ປະເພດຫມໍ້ໄຟ1 ຫມໍ້ໄຟ Lithium Ion ຕ້ອງການ (ລວມ)
ເວລາສາກໄຟ75 minutes (with included 2.5Ah battery and charger)
ເວລາແລ່ນສູງສຸດ 40 ນາທີ (ດ້ວຍແບັດເຕີຣີ 2.5Ah)
ນ້ໍາຫນັກລາຍການ14.62 ປອນ
ຂະໜາດສິນຄ້າ38 x 13 x 13 ນິ້ວ
ຕ້ອງການສະພາແຫ່ງແມ່ນແລ້ວ
UPC841821022297

8. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

This Kobalt product comes with a manufacturer's warranty. For detailed information regarding warranty coverage, terms, and conditions, please refer to the warranty card included with your purchase or visit the official Kobalt website. For technical support, replacement parts, or service inquiries, please contact Kobalt customer service through their official channels.

ເອກະສານທີ່ກ່ຽວຂ້ອງ - 4332692973

ກ່ອນview ຄູ່ມືຜູ້ໃຊ້ເຄື່ອງຕັດຫຍ້າໄຮ້ສາຍ Kobalt 80V Lithium-Ion
ຄູ່ມືຜູ້ໃຊ້ສຳລັບເຄື່ອງຕັດຫຍ້າໄຮ້ສາຍ Kobalt 80V Lithium-Ion (ຮຸ່ນ KST 2580-06), ເຊິ່ງມີລາຍລະອຽດກ່ຽວກັບການປະກອບ, ການເຮັດວຽກ, ຄຳແນະນຳດ້ານຄວາມປອດໄພ, ການບຳລຸງຮັກສາ ແລະ ການແກ້ໄຂບັນຫາ. ລວມທັງລາຍລະອຽດສະເພາະຂອງຜະລິດຕະພັນ ແລະ ຂໍ້ມູນການຮັບປະກັນ.
ກ່ອນview ຄູ່ມືຜູ້ໃຊ້ Kobalt KWT 6180-06 Cordless Wheeled String Trimmer
ຄູ່ມືຜູ້ໃຊ້ນີ້ໃຫ້ຄໍາແນະນໍາທີ່ສົມບູນແບບສໍາລັບ Kobalt KWT 6180-06 Cordless Wheeled String Trimmer, ກວມເອົາການລະມັດລະວັງດ້ານຄວາມປອດໄພ, ການປະກອບ, ການດໍາເນີນງານ, ການບໍາລຸງຮັກສາ, ການແກ້ໄຂບັນຫາ, ແລະຂໍ້ມູນການຮັບປະກັນ.
ກ່ອນview ຄູ່ມືຜູ້ໃຊ້ Kobalt 40V String Trimmer ແລະຂໍ້ມູນຈໍາເພາະ
ຄູ່ມືຜູ້ໃຊ້ທີ່ສົມບູນແບບແລະຂໍ້ມູນຈໍາເພາະຂອງຜະລິດຕະພັນສໍາລັບ Kobalt 40V String Trimmer (Model KST 120X-06), ລວມທັງການປະກອບ, ການດໍາເນີນງານ, ຄວາມປອດໄພ, ການບໍາລຸງຮັກສາແລະການຮັບປະກັນ.
ກ່ອນview ເຄື່ອງຕັດຫຍ້າ Kobalt 40 V: ຄູ່ມືການໃຊ້ງານ ແລະ ຄວາມປອດໄພ
ຄູ່ມືທີ່ຄົບຖ້ວນສົມບູນສຳລັບເຄື່ອງຕັດຫຍ້າ Kobalt 40 V (ຮຸ່ນ #KST 130X-06), ເຊິ່ງກວມເອົາຂໍ້ມູນການປະກອບ, ການດໍາເນີນງານ, ການບໍາລຸງຮັກສາ, ການແກ້ໄຂບັນຫາ ແລະ ການຮັບປະກັນ. ຮັບປະກັນການນໍາໃຊ້ເຄື່ອງຕັດຫຍ້າຂອງທ່ານຢ່າງປອດໄພ ແລະ ມີປະສິດທິພາບ.
ກ່ອນview ຄູ່ມື ແລະ ຄູ່ມືການໃຊ້ເຄື່ອງຕັດຫຍ້າ Kobalt KST 1040B-03 ແບບບໍ່ມີແປງ
ຄູ່ມືຜູ້ໃຊ້ທີ່ຄົບຖ້ວນສົມບູນສຳລັບເຄື່ອງຕັດຫຍ້າ Kobalt KST 1040B-03 ແບບບໍ່ມີແປງ, ເຊິ່ງກວມເອົາການປະກອບ, ການດໍາເນີນງານ, ຄວາມປອດໄພ, ການບໍາລຸງຮັກສາ, ແລະ ການແກ້ໄຂບັນຫາ. ຮຽນຮູ້ວິທີການໃຊ້ເຄື່ອງຕັດຫຍ້າ Kobalt ຂອງທ່ານຢ່າງປອດໄພ ແລະ ມີປະສິດທິພາບ.
ກ່ອນview ຄຳແນະນຳໃນການຕິດຕັ້ງຊຸດປຸ່ມກະແທກ Kobalt FPRO10407
ຄຳແນະນຳການຕິດຕັ້ງແບບເທື່ອລະຂັ້ນຕອນສຳລັບຊຸດປຸ່ມກົດ Kobalt FPRO10407 ສຳລັບເຄື່ອງຕັດຫຍ້າ Kobalt. ລວມມີຂໍ້ມູນຄວາມປອດໄພທີ່ຈຳເປັນ ແລະ ລາຍລະອຽດການຕິດຕໍ່ຝ່າຍບໍລິການລູກຄ້າ.