ແນະນຳ
This user manual provides comprehensive instructions for the safe and efficient operation, setup, and maintenance of the JBC JTSE-2QA Digital Hot Air Rework Station. Please read this manual thoroughly before using the device to ensure optimal performance and longevity.
ສິນຄ້າເກີນview
Figure 1: The JBC JTSE-2QA Digital Hot Air Rework Station, featuring the main unit with digital display, the hot air tool, and its dedicated stand. This station is designed for precise and controlled hot air applications in electronics rework.
The JBC JTSE-2QA is a high-performance digital hot air rework station designed for professional electronics repair and assembly. It offers precise temperature control and airflow management, making it ideal for desoldering and soldering surface-mount components (SMD).
ຄໍາແນະນໍາຄວາມປອດໄພ
ປະຕິບັດຕາມຄວາມລະມັດລະວັງດ້ານຄວາມປອດໄພຕໍ່ໄປນີ້ສະເໝີເພື່ອປ້ອງກັນການບາດເຈັບ ແລະຄວາມເສຍຫາຍຕໍ່ອຸປະກອນ:
- Ensure the station is connected to a properly grounded power outlet (230V).
- Do not touch the hot air nozzle or heated components directly. Use appropriate tools and allow components to cool.
- Operate the station in a well-ventilated area to dissipate fumes.
- Keep flammable materials away from the hot air stream.
- ຕັດການເຊື່ອມຕໍ່ສາຍໄຟກ່ອນທີ່ຈະດໍາເນີນການບໍາລຸງຮັກສາຫຼືທໍາຄວາມສະອາດ.
- Do not operate the station if the power cord or unit is damaged.
- This device is for professional use only. Keep out of reach of children.
ຕັ້ງຄ່າ
- ການຫຸ້ມຫໍ່: ເອົາສ່ວນປະກອບທັງຫມົດອອກຈາກການຫຸ້ມຫໍ່ຢ່າງລະມັດລະວັງ. ກວດສອບວ່າລາຍການທັງຫມົດທີ່ລະບຸໄວ້ໃນພາກ "ສິ່ງທີ່ຢູ່ໃນປ່ອງ" ແມ່ນມີຢູ່.
- ການຈັດວາງ: Place the main unit on a stable, heat-resistant, and level surface. Ensure adequate clearance around the unit for ventilation.
- Connect Hot Air Tool: Connect the hot air tool's hose and electrical connector to the corresponding ports on the main unit. Ensure a secure connection.
- Connect Stand: Position the hot air tool stand near the main unit and place the hot air tool securely in its holder when not in use. The stand often includes a sensor to detect when the tool is placed, activating standby mode.
- ການເຊື່ອມຕໍ່ພະລັງງານ: Plug the power cord into the main unit's power inlet, then connect it to a grounded 230V AC power outlet.
ຄໍາແນະນໍາການດໍາເນີນງານ
1. ເປີດ / ປິດພະລັງງານ
Press the power button located on the front panel to turn the station on or off. The digital display will illuminate upon startup.
2. Setting Temperature and Airflow
ໃຊ້ປຸ່ມນຳທາງ (+, -, OK) on the front panel to adjust the hot air temperature and airflow settings. The display shows the current and set values. The temperature range is typically 150°C to 450°C.
- ອຸນຫະພູມ: Adjust the desired hot air temperature for your application.
- ກະແສລົມ: Control the air volume output from the nozzle. Start with lower airflow for delicate components and increase as needed.
3. Using the Hot Air Tool
When the hot air tool is removed from its stand, the heating element will activate and the station will begin to reach the set temperature. When returned to the stand, the station will enter standby mode, cooling down the tool to a safe temperature.
- ເລືອກ nozzle ທີ່ເຫມາະສົມສໍາລັບຄໍາຮ້ອງສະຫມັກຂອງທ່ານ.
- Maintain a safe distance between the nozzle and the component to avoid overheating.
- Move the hot air tool in a circular motion to ensure even heating.
ບໍາລຸງຮັກສາ
Regular maintenance ensures the longevity and optimal performance of your JBC JTSE-2QA station.
- ທໍາຄວາມສະອາດ: ຕັດການເຊື່ອມຕໍ່ໄຟກ່ອນທີ່ຈະທໍາຄວາມສະອາດ. ໃຊ້ອ່ອນ, ງamp cloth to wipe down the exterior of the main unit and the hot air tool. Do not use abrasive cleaners or solvents.
- ການດູແລ Nozzle: Periodically inspect the hot air nozzles for blockages or damage. Clean them as needed to ensure proper airflow.
- ການກັ່ນຕອງອາກາດ: Check and clean or replace the air filter (if applicable) according to the manufacturer's recommendations to maintain optimal airflow and prevent dust accumulation.
- ການເກັບຮັກສາ: Store the station in a clean, dry environment when not in use.
ການແກ້ໄຂບັນຫາ
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ສະຖານີບໍ່ເປີດ. | ບໍ່ມີແຫຼ່ງຈ່າຍໄຟ; ສາຍໄຟວ່າງ. | ກວດສອບການເຊື່ອມຕໍ່ພະລັງງານ; ໃຫ້ແນ່ໃຈວ່າການອອກແມ່ນເຮັດວຽກ. |
| Hot air tool not heating. | Tool not properly connected; tool in stand (standby mode); faulty heating element. | Ensure tool is securely connected and removed from stand; contact support if element is faulty. |
| ກະແສລົມບໍ່ພຽງພໍ. | Blocked nozzle; dirty air filter. | Clean or replace nozzle; check and clean/replace air filter. |
| Temperature fluctuations. | Sensor issue; unstable power supply. | Ensure stable power; contact support for sensor issues. |
ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ລາຍລະອຽດ |
|---|---|
| ໝາຍເລກຕົວແບບ | JTSE-2QA |
| ຜູ້ຜະລິດ | JBC |
| ການປ້ອນຂໍ້ມູນ Voltage | 230 វ៉ុល AC |
| ຊ່ວງອຸນຫະພູມ | 150 - 450 °C (302 - 842 °F) |
| ຂະໜາດ (L x W x H) | 474 x 368 x 195 cm |
| ນ້ໍາຫນັກລາຍການ | 4.1 ກິໂລກຣາມ (4104 ກຣາມ) |
| ອົງປະກອບລວມ | ສະຖານີ Rework ອາກາດຮ້ອນ |
| ຈໍານວນຊ່ອງ | 1 |
ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
For warranty information, technical support, or service inquiries regarding your JBC JTSE-2QA Digital Hot Air Rework Station, please contact JBC customer service or visit their official webເວັບໄຊ. ຮັກສາໃບຮັບເງິນການຊື້ຂອງທ່ານໄວ້ເປັນຫຼັກຖານການຊື້ສໍາລັບການຮ້ອງຂໍການຮັບປະກັນ.
JBC Official Webເວັບໄຊ: www.jbctools.com
