ຄູ່ມື+

ພາກສະ 185218

Partsam 2Pcs Red Amber LED Trailer Fender Lights Instruction Manual

ແບບ: 185218

ຍີ່ຫໍ້: Partsam

1. ບົດແນະນຳ

This manual provides instructions for the installation, operation, and maintenance of your Partsam 2-piece Red and Amber LED Trailer Fender Lights. These lights are designed to enhance visibility and safety for trailers over 80 inches wide, serving as both front amber clearance lights and rear red clearance lights. They feature a pre-wired assembly with sealed, waterproof lenses for durability.

2. ຄຸນລັກສະນະຂອງຜະລິດຕະພັນ

3. ຂໍ້ມູນຄວາມປອດໄພ

Always prioritize safety during installation and operation. Failure to follow these guidelines may result in property damage or personal injury.

4. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

These fender lights are designed for straightforward installation on most trailers. No screws are included in the package.

4.1 ອົງປະກອບຫຼາຍກວ່າview

Two Partsam LED trailer fender lights, one showing amber light and the other red light, with illuminated versions above.
ຮູບ 1: ເກີນview of the Partsam LED Trailer Fender Lights. The image displays two fender lights, each with an amber and a red LED. Above them are close-ups of the lights illuminated, showing the distinct amber and red beams.

4.2 ຂະໜາດ

Refer to the diagram below for detailed product dimensions to ensure proper fitment on your trailer fender.

Dimensional drawing of the Partsam LED trailer fender light, showing length, width, and height measurements.
Figure 2: Product Dimensions. This diagram provides precise measurements for the fender light, including its length (6.5 inches), width (2.13 inches), and thickness (0.87 inches), aiding in installation planning.

4.3 ຄໍາແນະນໍາການຕິດຕັ້ງ

  1. ເລືອກສະຖານທີ່ຕິດຕັ້ງ: Choose a suitable location on the top or side of your trailer fender. The lights are designed to mark the widest point of your trailer.
  2. ຕຳແໜ່ງ: Ensure the amber LED faces towards the front of the trailer and the red LED faces towards the rear.
  3. ຮັບປະກັນຄວາມສະຫວ່າງ: Use appropriate self-tapping screws (not included) to secure the light assembly to the fender through the designated mounting holes.
  4. ການກຳນົດເສັ້ນທາງສາຍ: The light assembly includes a channel to hide the wiring, guiding it down into the fender for a clean installation.

4.4 ແຜນວາດສາຍ

The Partsam fender lights feature a 2-wire design for power and ground connections.

Connect these wires to your trailer's existing wiring system, ensuring proper polarity. It is recommended to use heat-shrink butt splices for secure and weather-resistant connections.

ໃກ້ຊິດ view of the back of a Partsam LED trailer fender light, showing the black and white wiring for power and ground.
Figure 3: Wiring Connections. This image shows the pre-wired black and white leads extending from the back of the fender light, ready for connection to the trailer's electrical system.
ລຸ່ມ view of a Partsam LED trailer fender light, highlighting the mounting holes and the integrated wiring channel.
ຮູບທີ 4: ຂ້າງລຸ່ມ View with Wiring Channel. This view illustrates the design of the light's base, including the two mounting screw holes and the integrated channel for routing the electrical wires discreetly along the fender.

For a visual guide on the product, consider watching the official product video:

Video 1: Partsam One Pair Trailer Fender Marker Lights. This video provides a general overview of the Partsam trailer fender marker lights, demonstrating their appearance and potential application.

5. ການດໍາເນີນງານ

Once properly installed and wired, the Partsam LED Trailer Fender Lights will operate in conjunction with your trailer's running lights. The amber LED will illuminate towards the front, and the red LED will illuminate towards the rear, providing continuous clearance marking.

Close-up of a Partsam LED trailer fender light illuminated, showing the amber light facing left and the red light facing right.
Figure 5: Illuminated Fender Light (Amber Left, Red Right). This image shows one of the fender lights with its amber LED shining to the left and its red LED shining to the right, demonstrating its dual-color functionality.
Close-up of a Partsam LED trailer fender light illuminated, showing the red light facing left and the amber light facing right.
Figure 6: Illuminated Fender Light (Red Left, Amber Right). This image shows the other fender light with its red LED shining to the left and its amber LED shining to the right, illustrating the complementary orientation for a pair.

6. ບໍາລຸງຮັກສາ

These LED fender lights are designed for minimal maintenance. To ensure optimal performance and longevity:

7. ການແກ້ໄຂບັນຫາ

ບັນຫາສາເຫດທີ່ເປັນໄປໄດ້ການແກ້ໄຂ
ແສງບໍ່ສະຫວ່າງNo power supply, incorrect wiring, loose connection, faulty light.Check power source and fuses. Verify wiring polarity (black to positive, white to ground). Secure all connections. Test with a known good power source. Replace if faulty.
ແສງສະຫຼຽງລະດັບສຽງຕ່ ຳtage, poor ground connection, dirty lens.ຮັບປະກັນ voltage supply. Check ground connection for corrosion or looseness. Clean the light lenses.
ຄວາມຊຸ່ມຊື່ນພາຍໃນເລນSeal compromise.While lights are sealed, extreme conditions or damage can compromise. Inspect for cracks. If persistent, replacement may be necessary.

8. ຂໍ້ມູນຈໍາເພາະ

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information or technical support regarding your Partsam LED Trailer Fender Lights, please refer to the official Partsam webເວັບໄຊ ຫຼືຕິດຕໍ່ບໍລິການລູກຄ້າຂອງເຂົາເຈົ້າໂດຍກົງ. ຮັກສາໃບຮັບເງິນການຊື້ຂອງທ່ານສໍາລັບການຮຽກຮ້ອງການຮັບປະກັນໃດໆ.

You can visit the Partsam Store for more products and information: Partsam Store

ເອກະສານທີ່ກ່ຽວຂ້ອງ - 185218

ກ່ອນview Twin Size High Loft Bed with Bookcase + Desk Assembly Instructions
Comprehensive assembly instructions for the Maxwood Furniture Twin Size High Loft Bed with Bookcase and Desk (Model 185218), including safety guidelines and parts lists.