ຄູ່ມືຜູ້ໃຊ້ ZKTeco WL10 Wireless Fingerprint Time Attendance System

1. ບົດແນະນຳ

The ZKTeco WL10 is a wireless fingerprint time and attendance terminal designed for efficient employee management. It integrates a fingerprint sensor, a 2.8-inch TFT display, and Wi-Fi connectivity to provide a reliable solution for recording attendance data. This manual provides detailed instructions for the setup, operation, and maintenance of your WL10 device.

2. ຂໍ້ມູນຄວາມປອດໄພ

• Ensure the device is installed in a dry environment, away from direct sunlight and extreme temperatures.
• ໃຊ້ພຽງແຕ່ອະແດບເຕີພະລັງງານທີ່ໃຫ້ມາກັບອຸປະກອນ.
• ຢ່າພະຍາຍາມຖອດປະກອບ ຫຼືສ້ອມແປງອຸປະກອນດ້ວຍຕົນເອງ. ອ້າງອີງເຖິງພະນັກງານບໍລິການທີ່ມີຄຸນວຸດທິ.
• Keep the fingerprint sensor clean and free from dust or liquids.

3. ເນື້ອໃນຊຸດ

ກະລຸນາກວດເບິ່ງຊຸດສຳລັບລາຍການຕໍ່ໄປນີ້:

• ZKTeco WL10 Time Attendance Terminal
• Power Adapter
• ອຸປະກອນເສີມ (ສະກູ, ສຽບຝາ)
• ຄູ່ມືເລີ່ມຕົ້ນດ່ວນ (ຖ້າລວມ)

4. ອຸປະກອນເກີນview

Familiarize yourself with the components of the ZKTeco WL10 device.

Figure 4.1: ZKTeco WL10 Front View
This image displays the front of the ZKTeco WL10 device, featuring a 2.8-inch TFT display showing the date, time, and a "Check-in" prompt. Below the screen is a numeric keypad with function buttons (ESC, M/OK) and navigation arrows. To the right, a green-lit fingerprint sensor is visible, along with the ZKTeco logo at the bottom right.

4.1. ກະດານດ້ານຫນ້າ

• ຈໍສະແດງຜົນ TFT ຂະໜາດ 2.8 ນິ້ວ: Shows date, time, attendance status, menu options, and user information.
• ປຸ່ມກົດ: Numeric keys (0-9) for ID input and menu navigation, along with function keys like ESC (Escape) and M/OK (Menu/OK).
• ເຊັນເຊີນີ້ວມື: Used for fingerprint registration and verification for time attendance.
• ZKTeco Logo: ການລະບຸຍີ່ຫໍ້.

4.2. Side/Rear Panel (General)

• ພອດພະລັງງານ: ສໍາລັບການເຊື່ອມຕໍ່ອະແດບເຕີພະລັງງານ.
• ພອດ USB Host: For data transfer to/from a USB flash drive.
• USB Client Port: ສໍາລັບການເຊື່ອມຕໍ່ກັບຄອມພິວເຕີ.

5. ຕັ້ງຄ່າ

5.1. ການຕິດຕັ້ງອຸປະກອນ

1. Choose a suitable location for installation, ensuring it is easily accessible for users and away from direct sunlight or heat sources.
2. Use the provided mounting template (if available) to mark the drilling positions on the wall.
3. ເຈາະຮູແລະສຽບໃສ່ຝາ.
4. ຍຶດອຸປະກອນໄວ້ກັບຝາໂດຍໃຊ້ສະກູທີ່ໃຫ້ມາ.

5.2. ການເຊື່ອມຕໍ່ພະລັງງານ

Connect the supplied power adapter to the device's power port and then plug it into a power outlet. The device will power on automatically.

5.3. Initial Configuration and Wi-Fi Setup

1. Upon first power-on, the device may prompt for initial settings like date, time, and language. Follow the on-screen instructions.
2. ເພື່ອຕັ້ງຄ່າ Wi-Fi:
   • ກົດ M/OK ປຸ່ມເພື່ອເຂົ້າໄປໃນເມນູຕົ້ນຕໍ.
   • ທ່ອງໄປຫາ ຄອມ. or ເຄືອຂ່າຍ ການຕັ້ງຄ່າ.
   • ເລືອກ Wi-Fi and enable it.
   • Scan for available networks and select your desired Wi-Fi network.
   • Enter the Wi-Fi password using the keypad and confirm.
   • ເມື່ອເຊື່ອມຕໍ່ແລ້ວ, ໄອຄອນ Wi-Fi ຈະປາກົດຢູ່ເທິງຈໍສະແດງຜົນ.

6. ຄໍາແນະນໍາການດໍາເນີນງານ

6.1. ການລົງທະບຽນຜູ້ໃຊ້

Before users can record attendance, they must be registered in the system.

1. ກົດ M/OK ເພື່ອເຂົ້າໄປໃນເມນູຫຼັກ.
2. ທ່ອງໄປຫາ ການຄຸ້ມຄອງຜູ້ໃຊ້ > ຜູ້ໃຊ້ໃໝ່.
3. Enter a unique User ID (e.g., 1 to 1000).
4. ເລືອກ ລົງທະບຽນນິ້ວມື. Place the user's finger on the sensor three times, lifting it slightly between each placement. Ensure full contact.
5. Optionally, enroll a password or card (if supported).
6. ບັນທຶກຂໍ້ມູນຜູ້ໃຊ້.

6.2. Recording Attendance (Check-in/Check-out)

ຈາກ ໜ້າ ຈໍຫຼັກ:

• ວາງນິ້ວມືທີ່ລົງທະບຽນໄວ້ເທິງເຊັນເຊີລາຍນິ້ວມື.
• The device will verify the fingerprint and display a success message, recording the attendance event (e.g., "Check-in Success").
• The device automatically determines "Check-in" or "Check-out" based on the last recorded event and configured time settings.

6.3. ການຄຸ້ມຄອງຂໍ້ມູນ

The WL10 supports various methods for data management.

6.3.1. Self-Service Recorder (SSR) Report

The SSR function allows users to download attendance reports directly to a USB flash drive without needing software.

1. Insert a formatted USB flash drive into the device's USB Host port.
2. ກົດ M/OK ເພື່ອເຂົ້າໄປໃນເມນູຫຼັກ.
3. ທ່ອງໄປຫາ ລາຍງານ or ແຜ່ນ USB > ດາວໂຫລດບົດລາຍງານ.
4. Select the desired report type (e.g., Attendance Log, User Info) and confirm.
5. The report will be saved to the USB drive in a readable format (e.g., Excel).

6.3.2. USB Host/Client Data Transfer

• ໂຮສ USB: For direct data download/upload using a USB flash drive (as described for SSR).
• ລູກຄ້າ USB: Connect the device to a computer using a USB cable. Use ZKTeco attendance management software (sold separately or available for download) to manage users, download logs, and configure advanced settings.

6.4. ການຕັ້ງຄ່າລະບົບ

Access the main menu (M/OK) to configure various system parameters:

• ວັນທີ ແລະເວລາ: ກຳນົດວັນທີ ແລະ ເວລາທີ່ຖືກຕ້ອງສຳລັບບັນທຶກການເຂົ້າຮ່ວມທີ່ຖືກຕ້ອງ.
• Scheduled Bell: Configure specific times for the device to ring a bell (e.g., start/end of shifts).
• DST (Daylight Saving Time): Enable or disable DST as per local requirements.
• Access Control (if applicable): Configure basic access control features if the device is connected to a door lock.
• ຂໍ້ມູນຂອງລະບົບ: View device details, firmware version, etc.

7. ບໍາລຸງຮັກສາ

• ທໍາຄວາມສະອາດ: Use a soft, dry cloth to clean the device's exterior. For the fingerprint sensor, use a lint-free cloth. Do not use abrasive cleaners or solvents.
• ການ​ສໍາ​ຮອງ​ຂໍ້​ມູນ​: Regularly back up attendance data to a USB flash drive or computer to prevent data loss.
• ການອັບເດດເຟີມແວ: ກວດເບິ່ງເຈົ້າຫນ້າທີ່ ZKTeco website for any available firmware updates. Follow the instructions provided with the update package carefully.

8. ການແກ້ໄຂບັນຫາ

9. ຂໍ້ມູນຈໍາເພາະ

10. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

ສໍາລັບຂໍ້ມູນການຮັບປະກັນແລະການສະຫນັບສະຫນູນດ້ານວິຊາການ, ກະລຸນາເບິ່ງເອກະສານທີ່ສະຫນອງໃຫ້ກັບການຊື້ຂອງທ່ານຫຼືໄປຢ້ຽມຢາມ ZKTeco ຢ່າງເປັນທາງການ webເວັບໄຊ. ຮັກສາໃບຮັບເງິນການຊື້ຂອງທ່ານໄວ້ເປັນຫຼັກຖານການຊື້ສໍາລັບການຮ້ອງຂໍການຮັບປະກັນ.

Manufacturer: Vicom Security Pvt Ltd