SEBSON Motion Detector and Chime Instruction Manual

1. ບົດແນະນຳ

This manual provides essential information for the proper installation, operation, and maintenance of your SEBSON Motion Detector and Chime. Please read these instructions carefully before using the device to ensure safe and efficient performance. This device is designed to detect movement and provide an audible alert, functioning as both a motion alarm and a passage chime.

2. ຂໍ້ມູນຄວາມປອດໄພ

• Ensure the device is installed in a dry environment, as it has an IP20 protection rating, meaning it is not protected against water.
• ຢ່າເຮັດໃຫ້ອຸປະກອນຖືກອຸນຫະພູມທີ່ຮຸນແຮງ ຫຼືແສງແດດໂດຍກົງ.
• ຮັກສາໃຫ້ໄກຈາກເດັກນ້ອຍ.
• Only use the specified 9V E-Block battery type.
• ຖິ້ມແບດເຕີລີ່ຢ່າງມີຄວາມຮັບຜິດຊອບຕາມກົດລະບຽບທ້ອງຖິ່ນ.

3. ເນື້ອໃນຊຸດ

• 1 x SEBSON Motion Detector and Chime (Model BWM_ALARM_B)
• ວົງເລັບ mounting
• ຮາດແວຕິດຕັ້ງ (ສະກູ, ສຽບຝາ)
• Note: 1x 9V E-Block battery is required and not included.

4. ຜະລິດຕະພັນເກີນview

The SEBSON Motion Detector and Chime is a compact, battery-powered device designed for versatile use. It features a passive infrared (PIR) sensor to detect movement and offers two distinct audible alert modes: a chime for passage detection and an alarm for security purposes.

ຮູບ 1: ດ້ານຫນ້າ view of the SEBSON Motion Detector and Chime.

ຮູບ 2: ດ້ານຫນ້າ view of the device, highlighting the SEBSON brand logo.

ຮູບ 3: ດ້ານຫລັງ view of the motion detector, illustrating the integrated mounting bracket.

5. ຕັ້ງຄ່າ

5.1 ການຕິດຕັ້ງຫມໍ້ໄຟ

1. ເລື່ອນຄ່ອຍໆເປີດຝາປິດຊ່ອງໃສ່ຫມໍ້ໄຟທີ່ຕັ້ງຢູ່ດ້ານຫຼັງຂອງອຸປະກອນ.
2. Insert one 9V E-Block battery, ensuring correct polarity (+/-).
3. ປິດຝາປິດຊ່ອງໃສ່ຫມໍ້ໄຟຢ່າງປອດໄພ.

5.2 ການຕິດຕັ້ງອຸປະກອນ

The device can be mounted on a wall using the provided bracket and hardware.

1. Choose a suitable location for installation. Consider the desired detection area and ensure the sensor has an unobstructed view.
2. Detach the mounting bracket from the main unit if it is not already separate.
3. Mark the positions for drilling holes on the wall using the bracket as a template.
4. ເຈາະຮູແລະສຽບໃສ່ຝາ.
5. ຍຶດເຂັມຍຶດຕິດໃສ່ຝາດ້ວຍສະກູທີ່ໃຫ້ໄວ້.
6. Attach the motion detector unit to the mounted bracket. The sensor housing can pivot 360 degrees within the bracket to adjust the detection angle.

Figure 4: Illustration of battery insertion and how the device attaches to the wall-mounted bracket.

6. ຄໍາແນະນໍາການດໍາເນີນງານ

6.1 ການເລືອກໂໝດ

The device features a three-position switch for selecting the operating mode:

• ສຽງດັງ: In this mode, the device emits a short chime sound when motion is detected. This is suitable for use as a passage detector in shops or offices.
• ປິດ: The device is turned off and will not detect motion or emit any sound.
• ເຕືອນ: In this mode, the device emits a loud alarm sound (approximately 70dB) when motion is detected. This is suitable for security purposes.

ຮູບທີ 5: ລາຍລະອຽດ view of the mode selection switch (1: Chime, 2: Off, 3: Alarm).

6.2 ເຂດກວດຫາ

The motion detector has a detection range of up to 8 meters and a detection angle of 60 degrees. For optimal performance, position the device to cover the desired area without obstructions.

Figure 6: Diagram showing the detection range (8m) and angle (60°), along with the 360° rotational capability of the sensor head.

7. ບໍາລຸງຮັກສາ

7.1 ການທົດແທນຫມໍ້ໄຟ

When the sound becomes weak or the device stops responding, it is time to replace the 9V E-Block battery. Follow the battery installation steps in Section 5.1.

7.2 ການທໍາຄວາມສະອາດ

To clean the device, use a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the surface or internal components. Ensure no moisture enters the device.

8. ການແກ້ໄຂບັນຫາ

• Device not detecting motion:
  • ກວດສອບວ່າແບັດເຕີຣີຖືກຕິດຕັ້ງຢ່າງຖືກຕ້ອງ ແລະ ມີພະລັງງານພຽງພໍຫຼືບໍ່. ປ່ຽນໃໝ່ຖ້າຈຳເປັນ.
  • Ensure the device is not in the "OFF" position.
  • Verify that the detection area is clear of obstructions.
  • Adjust the angle of the sensor to cover the desired area.
• No sound or weak sound:
  • ປ່ຽນແບັດເຕີຣີ 9V.
  • Ensure the device is not in the "OFF" position.
• ສັນຍານເຕືອນທີ່ບໍ່ຖືກຕ້ອງ:
  • Reposition the device to avoid areas with rapid temperature changes (e.g., near heaters, air conditioners) or moving objects (e.g., curtains near a window).
  • Ensure the detection area is free from small animals if not intended to detect them.

9. ຂໍ້ມູນຈໍາເພາະ

10. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official SEBSON webເວັບໄຊ. ຮັກສາຫຼັກຖານການຊື້ຂອງທ່ານສໍາລັບການຮຽກຮ້ອງການຮັບປະກັນໃດໆ.