MOOER UK Gold 900 Micro Preamp ຄູ່ມືການໃຊ້ງານ (M002)

ຄຸນນະສົມບັດທີ່ສໍາຄັນ

• High-quality dual-channel preamp.
• Independent 3-band EQ (Treble, Mid, Bass) for each channel.
• Independent Gain and Volume controls for each channel.
• Switchable speaker cabinet simulation.
• Two footswitch operating modes: On/Off or Channel A/B switching.
• Compact and durable metal housing.

ການຄວບຄຸມ ແລະການເຊື່ອມຕໍ່

ຮູບພາບ: ທາງຫນ້າ view of the MOOER UK Gold 900 Micro Preamp, showing the control knobs and footswitch.

• TRE (Treble) Knob: ປັບການຕອບສະໜອງຄວາມຖີ່ສູງ.
• MID (Middle) Knob: Adjusts the mid-range frequency response.
• ບິດເບສ: ປັບການຕອບສະໜອງຄວາມຖີ່ຕໍ່າ.
• ປຸ່ມເພີ່ມ: Controls the amount of overdrive/distortion.
• VOL (ປະລິມານ) Knob: ປັບລະດັບຜົນຜະລິດລວມ.
• CH/CAB Button:
  • Press to switch between Channel A and Channel B.
  • Press and hold to toggle the speaker cabinet simulation on or off.
• ສະຫຼັບຕີນ: Activates or bypasses the preamp, or switches between channels depending on the selected mode.
• Jack ຂາເຂົ້າ: ເຊື່ອມຕໍ່ guitar ຫຼືອຸປະກອນອື່ນໆຂອງທ່ານ.
• ຜົນໄດ້ຮັບ Jack: ເຊື່ອມຕໍ່ກັບ amplifier, mixer, ຫຼືການໂຕ້ຕອບສຽງ.
• ການປ້ອນຂໍ້ມູນພະລັງງານ DC 9V: Connect a 9V DC power adapter (center negative, 300mA minimum).

ຮູບພາບ: ດ້ານຫລັງ view of the MOOER UK Gold 900 Micro Preamp, showing the 9V DC power input.

ຮູບພາບ: ຂ້າງ view of the MOOER UK Gold 900 Micro Preamp, illustrating the input and output jacks.

ຕັ້ງຄ່າ

1. ການເຊື່ອມຕໍ່ພະລັງງານ: Connect a 9V DC power adapter (center negative, 300mA minimum) to the DC 9V input jack on the rear of the unit. Ensure the power supply meets these specifications to prevent damage.
2. ການ​ເຊື່ອມ​ຕໍ່​ເຄື່ອງ​ມື​: Connect your guitar or other instrument to the INPUT jack on the right side of the preamp using a standard 1/4-inch instrument cable.
3. ການເຊື່ອມຕໍ່ຂາອອກ: Connect the OUTPUT jack on the left side of the preamp ກັບ​ທ່ານ amplifier's input, effects loop return, or an audio interface/mixer.
4. ການຕັ້ງຄ່າເບື້ອງຕົ້ນ: Before powering on, set all control knobs (TRE, MID, BASS, GAIN, VOL) to their minimum positions to avoid sudden loud sounds.
5. ເປີດ: Once all connections are secure, apply power to the unit. The LED indicator will illuminate.

ຄໍາແນະນໍາການດໍາເນີນງານ

ການເລືອກຊ່ອງ

The UK Gold 900 features two channels, A and B, each with independent EQ, Gain, and Volume settings.

• To switch channels: Briefly press the CH/CAB button. The LED color will change to indicate the active channel (e.g., green for Channel A, red for Channel B).

Speaker Cabinet Simulation

ກ່ອນamp includes an integrated speaker cabinet simulation, which is useful for direct recording or connecting to a PA system.

• To toggle cabinet simulation: Press and hold the CH/CAB button for approximately 2 seconds. The LED will flash to indicate the change.

ໂFoດ Footswitch

The footswitch can operate in two different modes:

1. ໂໝດເປີດ/ປິດ: In this mode, the footswitch acts as a bypass, turning the preamp ຜົນກະທົບໃນຫຼືປິດ.
2. Channel A/B Mode: In this mode, the footswitch switches between Channel A and Channel B.

Refer to the product's full manual or manufacturer's website for instructions on how to switch between these footswitch modes, as this functionality is typically configured via a hidden switch or specific power-up sequence.

ການປັບສຽງ

Adjust the following controls to shape your sound:

• ໄດ້ຮັບ: Increase for more overdrive and distortion. Decrease for cleaner tones.
• VOL: ປັບປະລິມານຜົນຜະລິດໂດຍລວມ.
• TRE, MID, BASS: Use these three knobs to fine-tune the equalization for your desired tone.

ບໍາລຸງຮັກສາ

• ທໍາຄວາມສະອາດ: ໃຊ້ຜ້າປຽກແຫ້ງເພື່ອເຮັດຄວາມສະອາດເຄື່ອງ. ຢ່າໃຊ້ນໍ້າສະອາດ ຫຼືສານລະລາຍ.
• ການເກັບຮັກສາ: ເກັບຮັກສາໄວ້ກ່ອນamp in a dry environment, away from extreme temperatures and direct sunlight.
• ການສະຫນອງພະລັງງານ: Always use the specified 9V DC (center negative) power supply. Incorrect power can damage the unit.
• ການເຊື່ອມຕໍ່: Ensure all cables are securely connected but do not overtighten. Disconnect cables when the unit is not in use for extended periods.

ການແກ້ໄຂບັນຫາ

• ບໍ່ມີສຽງ:
  • ກວດສອບການເຊື່ອມຕໍ່ສາຍທັງໝົດ (ອິນພຸດ, ອໍພຸດ, ພະລັງງານ).
  • ໃຫ້ແນ່ໃຈວ່າແຫຼ່ງຈ່າຍໄຟໄດ້ເຊື່ອມຕໍ່ຢ່າງຖືກຕ້ອງ ແລະ ເຮັດວຽກຢ່າງຖືກຕ້ອງ.
  • Verify that the volume knobs on the preamp ແລະຂອງທ່ານ amplifier are not set to zero.
  • Test with different cables and instruments to rule out faulty equipment.
• Undesired Noise/Buzz:
  • Ensure you are using a regulated 9V DC (center negative) power supply. Unregulated or incorrect power supplies can introduce noise.
  • Check for ground loops by trying different power outlets or isolating the power supply.
  • Reduce gain settings if the noise is excessive distortion.
  • ຮັບປະກັນວ່າສາຍໄຟທັງໝົດມີການປ້ອງກັນ ແລະ ຢູ່ໃນສະພາບດີ.
• ສະວິດຕີນບໍ່ຕອບສະໜອງ:
  • ກວດໃຫ້ແນ່ໃຈວ່າເຄື່ອງເປີດຢູ່.
  • If the footswitch mode is set to Channel A/B, it will not bypass the effect.

ຂໍ້ມູນຈໍາເພາະ

ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

ສຳລັບຂໍ້ມູນການຮັບປະກັນ ແລະ ການຊ່ວຍເຫຼືອດ້ານເຕັກນິກ, ກະລຸນາອ້າງອີງເຖິງ MOOER ຢ່າງເປັນທາງການ webຫຼື ຕິດຕໍ່ຕົວແທນຈຳໜ່າຍ MOOER ທີ່ໄດ້ຮັບອະນຸຍາດຂອງທ່ານ. ເກັບໃບຮັບເງິນຊື້ຂອງທ່ານໄວ້ເປັນຫຼັກຖານການຊື້ສຳລັບການຮຽກຮ້ອງການຮັບປະກັນ.

MOOER Official Webເວັບໄຊ: www.mooeraudio.com