Hager SVN129 LED Pilot Light Instruction Manual

1. ບົດແນະນຳ

This instruction manual provides essential information for the safe installation, operation, and maintenance of the Hager SVN129 LED Pilot Light. The SVN129 is a compact indicator designed for electrical panels and control systems, featuring red, green, and orange LED illumination and operating on a 230V AC supply.

ກະລຸນາອ່ານຄູ່ມືນີ້ຢ່າງລະອຽດກ່ອນທີ່ຈະຕິດຕັ້ງ ແລະເກັບຮັກສາມັນໄວ້ສໍາລັບການອ້າງອີງໃນອະນາຄົດ.

2. ຂໍ້ມູນຄວາມປອດໄພ

ຄຳເຕືອນ: Electrical installation should only be performed by qualified and authorized personnel. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• ໃຫ້ຕັດການເຊື່ອມຕໍ່ໄຟຟ້າຢູ່ທີ່ເບກເກີຫຼັກກ່ອນຕິດຕັ້ງ ຫຼື ບໍລິການອຸປະກອນສະເໝີ.
• ໃຫ້ແນ່ໃຈວ່າສາຍໄຟທັງຫມົດປະຕິບັດຕາມລະຫັດໄຟຟ້າທ້ອງຖິ່ນແລະແຫ່ງຊາດ.
• ຢ່າໃຊ້ອຸປະກອນຖ້າມັນປະກົດວ່າເສຍຫາຍ.
• This device is designed for indoor use in dry locations unless otherwise specified.
• ກວດສອບການສະຫນອງ voltage matches the device's rated voltage (230V AC).

3. ຜະລິດຕະພັນເກີນview

The Hager SVN129 is an LED pilot light designed for clear visual indication within electrical systems. Its key features include:

• ໄຟ LED: Provides bright red, green, and orange light for status indication.
• ສະບັບtage ການ​ຈັດ​ອັນ​ດັບ​: Operates on 230V AC.
• ຂະໜາດໂມດູນ: Occupies 1 module space in a standard electrical panel.
• ຄວາມຖີ່: Designed for 50/60 Hz systems.

Figure 1: Hager SVN129 LED Pilot Light. This image displays the front view of the SVN129 LED pilot light, highlighting its compact form factor suitable for integration into electrical panels. The indicator features a clear lens, designed to display red, green, or orange light depending on the operational status.

4. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

Installation of the Hager SVN129 LED Pilot Light should be carried out by a qualified electrician in accordance with all applicable electrical standards and regulations.

1. ການຕັດການເຊື່ອມຕໍ່ໄຟຟ້າ: Ensure the main power supply to the installation area is completely disconnected and secured against accidental re-connection.
2. ການຕິດຕັ້ງ: The SVN129 is designed for DIN rail mounting. Snap the device onto the DIN rail in the desired position within the electrical enclosure.
3. ສາຍໄຟ: Connect the 230V AC supply wires to the designated terminals on the pilot light. Refer to the wiring diagram on the device or packaging for correct polarity and connection points. Typically, these devices have two terminals for line and neutral connections.
4. ການເຊື່ອມຕໍ່ທີ່ປອດໄພ: Ensure all terminal screws are tightened securely to prevent loose connections, which can cause overheating or intermittent operation.
5. ການຢັ້ງຢືນ: Double-check all wiring connections before restoring power.
6. ການຟື້ນຟູພະລັງງານ: Restore power to the circuit. The pilot light should illuminate according to the circuit status it is monitoring.

5. ຄໍາແນະນໍາການດໍາເນີນງານ

The Hager SVN129 LED Pilot Light operates as a visual indicator. Once correctly installed and connected to a 230V AC circuit, it will illuminate to indicate the status of that circuit or a specific condition within an electrical system.

• The specific color (red, green, or orange) displayed by the LED will depend on the model variant and the intended application for which it was selected.
• No user interaction is required for its operation beyond initial installation.

6. ບໍາລຸງຮັກສາ

The Hager SVN129 LED Pilot Light is designed for minimal maintenance. However, periodic checks can ensure continued reliable operation.

• ທໍາຄວາມສະອາດ: If necessary, gently wipe the surface of the pilot light with a soft, dry, or slightly damp ຜ້າ. ຢ່າໃຊ້ເຄື່ອງເຮັດຄວາມສະອາດຂັດຫຼືສານລະລາຍ.
• ການກວດກາ: Periodically inspect the device for any signs of physical damage, discoloration, or loose connections. If any issues are found, disconnect power and consult a qualified electrician.
• ບໍ່ມີພາກສ່ວນທີ່ຜູ້ໃຊ້ບໍລິການ: The LED pilot light contains no user-serviceable parts. Do not attempt to open or repair the unit.

7. ການແກ້ໄຂບັນຫາ

If the Hager SVN129 LED Pilot Light is not functioning as expected, consider the following troubleshooting steps:

• ແສງໄຟບໍ່ສະຫວ່າງ:
  • Check if the power supply to the circuit is active.
  • Verify that the pilot light is correctly wired and connections are secure.
  • ຮັບປະກັນການສະຫນອງ voltage ແມ່ນ 230V AC.
  • If the above steps do not resolve the issue, the device may be faulty and require replacement by a qualified electrician.
• ການດໍາເນີນງານແບບບໍ່ຢຸດຢັ້ງ:
  • Check for loose wiring connections at the terminals.
  • Ensure stable power supply to the circuit.

For issues not covered here, contact a qualified electrician or Hager customer support.

8. ຂໍ້ມູນຈໍາເພາະ

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For information regarding warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official Hager website. For technical support or inquiries, please contact Hager customer service through their official channels.

ໝາຍເຫດ: ຂໍ້ມູນຈຳເພາະ ແລະ ຮູບລັກສະນະຂອງຜະລິດຕະພັນອາດມີການປ່ຽນແປງໂດຍບໍ່ຕ້ອງແຈ້ງໃຫ້ຊາບລ່ວງໜ້າ.