1. ບົດແນະນຳ
The Axxess AX-TOYCAM2-6V is an interface designed to facilitate the retention of a factory backup camera or the addition of an aftermarket backup camera in select Toyota vehicles. This module includes an AX-CAM6V 12-volt to 6-volt converter, ensuring compatibility with factory camera systems that operate on a lower voltage. This manual provides essential information for proper installation, operation, and maintenance of the device.
2. ຂໍ້ມູນຄວາມປອດໄພ
- Always disconnect the vehicle's negative battery terminal before beginning any installation to prevent electrical shorts and damage.
- ການຕິດຕັ້ງແບບມືອາຊີບແມ່ນແນະນໍາສໍາລັບການປະຕິບັດທີ່ດີທີ່ສຸດແລະຄວາມປອດໄພ.
- ໃຫ້ແນ່ໃຈວ່າການເຊື່ອມຕໍ່ທັງຫມົດແມ່ນປອດໄພແລະຖືກ insulated ຢ່າງຖືກຕ້ອງເພື່ອປ້ອງກັນບໍ່ໃຫ້ວົງຈອນສັ້ນ.
- Do not modify the harness or components unless explicitly instructed. Unauthorized modifications can void the warranty and cause damage.
- Route all wiring away from moving parts, heat sources, and sharp edges to prevent damage.
3. ເນື້ອໃນຊຸດ
Verify that all items are present before proceeding with the installation:
- Axxess AX-TOYCAM2-6V Interface Harness
- AX-CAM6V 12-volt to 6-volt Converter
The image below displays the main components of the AX-TOYCAM2-6V harness.
This image displays the Axxess AX-TOYCAM2-6V harness, featuring multiple connectors for integration with a Toyota vehicle's wiring system and an RCA connector for a backup camera. The harness includes red and black wires for power and ground connections, and a separate 6-volt converter.
4. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ
This section outlines the general steps for installing the AX-TOYCAM2-6V interface. Specific vehicle wiring diagrams and disassembly instructions should be consulted for your particular Toyota model.
4.1 ຂັ້ນຕອນການຕິດຕັ້ງກ່ອນ
- ຕັດການເຊື່ອມຕໍ່ຫມໍ້ໄຟ: ຖອດຂົ້ວລົບຂອງແບັດເຕີຣີຂອງລົດອອກ.
- Access Vehicle Wiring: Carefully remove the necessary trim panels and the factory head unit to gain access to the vehicle's wiring harness.
4.2 ການເຊື່ອມຕໍ່ Harness
- ເຊື່ອມຕໍ່ສາຍໄຟອິນເຕີເຟດ: Connect the AX-TOYCAM2-6V harness to the corresponding factory connectors behind the head unit. Ensure all connections are firm and secure.
- Connect 6-Volt Converter (AX-CAM6V): If retaining a factory camera or adding a camera requiring 6V, connect the AX-CAM6V converter. The typical wiring for the converter is:
- ສາຍສີຟ້າ/ສີຂາວ: 12V Input (Connect to a switched 12V source).
- Blue/Red Wire: 6V Output (Connect to the camera's 6V power input).
- ສາຍດຳ: Ground (Connect to a reliable chassis ground).
- Connect Camera (if adding): Connect the aftermarket backup camera's video output (RCA) to the yellow RCA input on the AX-TOYCAM2-6V harness.
4.3 ຂັ້ນຕອນຫຼັງການຕິດຕັ້ງ
- ການທໍາງານຂອງການທົດສອບ: Reconnect the vehicle's battery. Turn on the ignition and engage reverse gear to test the backup camera display. Verify that the image is clear and activates correctly.
- ປະກອບຄືນໃໝ່: Once functionality is confirmed, carefully reassemble all removed trim panels and secure the head unit.
The following video demonstrates the physical appearance of the harness, which can assist in identifying components during installation.
This video provides a 360-degree view of the Axxess AX-TOYCAM2-6V harness, showcasing its various connectors and wiring. It helps in identifying the components included in the package and understanding its physical form factor.
5. ຄໍາແນະນໍາການດໍາເນີນງານ
The Axxess AX-TOYCAM2-6V interface operates automatically. Once correctly installed, the connected backup camera will display its image on the vehicle's screen when the transmission is shifted into reverse gear. No manual intervention is required for its basic operation.
6. ບໍາລຸງຮັກສາ
The AX-TOYCAM2-6V is a low-maintenance electronic component. To ensure its longevity and reliable performance:
- ກວດເບິ່ງທຸກສາຍເຊື່ອມຕໍ່ເປັນໄລຍະເພື່ອຮັບປະກັນວ່າພວກມັນຮັກສາຄວາມປອດໄພ ແລະ ບໍ່ມີການກັດກ່ອນ.
- ຫຼີກເວັ້ນການເປີດເຜີຍໂມດູນກັບອຸນຫະພູມທີ່ຮຸນແຮງຫຼືຄວາມຊຸ່ມຊື່ນ.
- Do not attempt to open or service the module yourself. Refer to qualified technicians for any issues beyond basic troubleshooting.
7. ການແກ້ໄຂບັນຫາ
If you encounter issues with your backup camera system after installing the AX-TOYCAM2-6V, consider the following troubleshooting steps:
7.1 No Camera Display
- ກວດສອບພະລັງງານ: Ensure the 12V input to the AX-CAM6V converter is receiving power when the vehicle is in reverse. Verify the ground connection.
- ຢືນຢັນການເຊື່ອມຕໍ່: Double-check all harness connections to the factory wiring and the camera's RCA input.
- ການທໍາງານຂອງກ້ອງຖ່າຍຮູບ: Test the backup camera directly if possible, to rule out a faulty camera.
7.2 Distorted or Intermittent Image
- Inspect RCA Cable: Ensure the RCA video cable is not damaged, pinched, or routed near high-voltage wires that could cause interference.
- ການເຊື່ອມຕໍ່ທີ່ປອດໄພ: Confirm all video connections are tight and free from corrosion.
- ສະຖຽນລະພາບພະລັງງານ: Verify that the 6V output from the AX-CAM6V converter is stable.
If problems persist after performing these checks, contact Axxess technical support or a qualified installer.
8. ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ລາຍລະອຽດ |
|---|---|
| ໝາຍເລກຕົວແບບ | AXTOYCAM26V |
| ຂະໜາດສິນຄ້າ | 5 x 3 x 1 ນິ້ວ |
| ນ້ໍາຫນັກລາຍການ | 3.2 ອອນ |
| ຍີ່ຫໍ້ | Axxess |
| ຜູ້ຜະລິດ | AXXESS MOBILITY |
| ອຸປະກອນທີ່ເຂົ້າກັນໄດ້ | ຕິດຕາມກວດກາ |
| ປະເພດການຕິດຕັ້ງ | Surface Mount |
| ສະບັບtage | 12 Volts (Input), 6 Volts (Output via converter) |
| ປະເພດຕົວເຊື່ອມຕໍ່ | HDMI, DC power (for camera, via RCA) |
9. ຂໍ້ມູນການຮັບປະກັນ
Axxess products are covered by a manufacturer's warranty. For specific details regarding the warranty period, coverage, and claims process for the AX-TOYCAM2-6V, please refer to the warranty documentation included with your purchase or visit the official Axxess webເວັບໄຊ. ຮັກສາຫຼັກຖານການຊື້ຂອງທ່ານສໍາລັບການຮັບປະກັນຄວາມຖືກຕ້ອງ.
10. ສະຫນັບສະຫນູນ
For technical assistance, installation questions, or further support regarding the Axxess AX-TOYCAM2-6V, please contact Axxess customer support directly. You can typically find contact information on the Axxess webສະຖານທີ່ຫຼືຢູ່ໃນການຫຸ້ມຫໍ່ຜະລິດຕະພັນ.
Axxess Official Webເວັບໄຊ: https://axxessinterfaces.com/ (Please note: This is a general placeholder link, verify the current official support website for Axxess.)
