ຄູ່ມືຜູ້ໃຊ້ເຄື່ອງຈັບເວລາແບບສຽບ BEMKO B62-TSMD20 TS SCHUKO

1. ບົດແນະນຳ

This manual provides detailed instructions for the safe and efficient use of your BEMKO B62-TSMD20 TS SCHUKO Plug-in Timer. Please read this manual thoroughly before installation and operation to ensure proper function and to prevent damage or injury. This device is designed to automatically switch electrical appliances ON and OFF at pre-set times over a 24-hour period.

2. ຂໍ້ມູນຄວາມປອດໄພ

• Always disconnect power before attempting any installation, maintenance, or cleaning.
• Do not exceed the maximum load rating of 3500W or 16A. Overloading can cause damage to the device and connected appliances, and may pose a fire hazard.
• Ensure the timer is plugged into a properly grounded 230V/50Hz electrical outlet.
• This device is designed for indoor use only. Do not expose it to water, moisture, or extreme temperatures.
• ຢ່າພະຍາຍາມເປີດຫຼືສ້ອມແປງອຸປະກອນ. ອ້າງອີງການບໍລິການທັງໝົດໃຫ້ກັບບຸກຄະລາກອນທີ່ມີຄຸນວຸດທິ.
• ຮັກສາໃຫ້ໄກຈາກເດັກນ້ອຍ.

3. ຜະລິດຕະພັນເກີນview

The BEMKO B62-TSMD20 is an analog plug-in timer designed for simple and reliable control of electrical devices. It features a 24-hour dial for setting daily programs and a manual override switch.

ຮູບທີ 1: ດ້ານໜ້າ view of the BEMKO B62-TSMD20 TS SCHUKO Plug-in Timer. The image displays the timer with a central Schuko type electrical socket. This socket is surrounded by a rotating 24-hour dial marked with numbers from 1 to 24 (or AM/PM indications) and small, push-down pins along its circumference for setting time intervals. A manual override switch is visible on the right side of the white casing.

ອົງ​ປະ​ກອບ​ທີ່​ສໍາ​ຄັນ​:

• Schuko Socket: For plugging in the appliance to be controlled.
• ໂທ 24 ຊົ່ວໂມງ: Rotates clockwise, marked with hours and minutes.
• ໝຸດໂປຣແກຣມ: Small segments around the dial, each representing 15 minutes.
• ສະວິດ Override ດ້ວຍຕົນເອງ: Allows for continuous ON, continuous OFF, or timer-controlled operation.

4. ຕັ້ງຄ່າ

1. ປລັກອິນ: Insert the BEMKO B62-TSMD20 timer into a standard 230V/50Hz wall outlet.
2. ຕັ້ງເວລາປະຈຸບັນ: Rotate the 24-hour dial clockwise until the current time aligns with the arrow or marker on the timer's body. Ensure you distinguish between AM and PM hours (e.g., 3 PM is 15:00).
3. ຕັ້ງໂຄງການ:
   • Each segment (pin) on the dial represents 15 minutes.
   • To set an 'ON' period, push the corresponding pins downwards.
   • To set an 'OFF' period, leave the corresponding pins in the upward position.
   • ຕົວຢ່າງample, to turn an appliance ON from 7:00 AM to 8:00 AM, push down all four pins between the 7 and 8 o'clock marks.
4. ເຊື່ອມຕໍ່ອຸປະກອນ: Plug the appliance you wish to control into the Schuko socket on the front of the timer.

5. ຄໍາແນະນໍາການດໍາເນີນງານ

ສະວິດ Override ດ້ວຍຕົນເອງ:

The manual override switch, typically located on the side of the timer, allows you to control the power output independently of the set program. It usually has three positions:

• Timer Mode (Clock Icon): The timer operates according to the set program (pins pushed down/up).
• Always ON (I Icon): The power output is continuously ON, regardless of the program settings.
• Always OFF (O Icon): The power output is continuously OFF, regardless of the program settings.

Select the desired mode by sliding the switch to the appropriate position.

6. ບໍາລຸງຮັກສາ

• ທໍາຄວາມສະອາດ: Disconnect the timer from the power outlet before cleaning. Wipe the exterior with a soft, dry cloth. Do not use liquid cleaners, abrasives, or solvents.
• ການເກັບຮັກສາ: ເກັບຮັກສາເຄື່ອງຈັບເວລາໄວ້ໃນບ່ອນທີ່ເຢັນ, ແຫ້ງເມື່ອບໍ່ໄດ້ໃຊ້.
• The BEMKO B62-TSMD20 contains no user-serviceable parts. Do not attempt to disassemble the unit.

7. ການແກ້ໄຂບັນຫາ

• Appliance not turning ON/OFF:
  • Check if the timer is securely plugged into the wall outlet.
  • Verify that the appliance is correctly plugged into the timer's socket.
  • Ensure the manual override switch is set to the 'Timer Mode' (clock icon).
  • Confirm that the program pins are correctly set for the desired ON/OFF times.
  • Check if the current time on the dial is accurately set.
• ໂມງຈັບເວລາບໍ່ກ້າວຫນ້າ:
  • ໃຫ້ແນ່ໃຈວ່າເຄື່ອງຈັບເວລາໄດ້ຮັບພະລັງງານຈາກເຕົ້າສຽບໃສ່ຝາ.
  • If the timer has been unplugged for an extended period, it may need to be reset to the current time once power is restored.
• ຄວາມຮ້ອນເກີນ:
  • Immediately unplug the timer and the connected appliance.
  • Ensure the connected appliance's power consumption does not exceed the timer's maximum load rating (3500W / 16A).

8. ຂໍ້ມູນຈໍາເພາະ

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information, technical support, or service inquiries regarding your BEMKO B62-TSMD20 TS SCHUKO Plug-in Timer, please contact your retailer or the manufacturer, Bemko, directly. Please retain your proof of purchase for warranty claims.