ຄູ່ມືຜູ້ໃຊ້ CipherLab 1504B ລະດັບເຂົ້າ 2D Imager

1. ບົດແນະນຳ

This manual provides comprehensive instructions for the setup, operation, and maintenance of your CipherLab 1504B Entry Level 2D Imager. The CipherLab 1504B is a high-performance 2D barcode scanner designed for efficient data capture in various environments, including retail, healthcare, and logistics. It is capable of reading both 1D and 2D barcodes quickly and accurately.

ຮູບທີ 1: The CipherLab 1504B 2D Imager. This image displays the ergonomic design of the handheld scanner, featuring a trigger button and a scanning window at the front. The device is black with a yellow trigger accent.

2. ຕັ້ງຄ່າ

2.1 ການຫຸ້ມຫໍ່

ເອົາສ່ວນປະກອບທັງຫມົດອອກຈາກການຫຸ້ມຫໍ່ຢ່າງລະມັດລະວັງ. ກວດ​ສອບ​ວ່າ​ມີ​ລາຍ​ການ​ດັ່ງ​ຕໍ່​ໄປ​ນີ້​:

• CipherLab 1504B 2D Imager
• ສາຍ USB
• ຄູ່ມືເລີ່ມຕົ້ນດ່ວນ (ຖ້າລວມ)

2.2 ການເຊື່ອມຕໍ່ອຸປະກອນ

1. Locate an available USB port on your host computer.
2. Connect the smaller end of the USB cable to the port at the base of the CipherLab 1504B imager.
3. Connect the larger end of the USB cable to the USB port on your computer.
4. The imager will power on automatically. Most operating systems will detect the device as a standard HID keyboard device and install necessary drivers automatically.

2.3 ການຕັ້ງຄ່າເບື້ອງຕົ້ນ

The CipherLab 1504B is typically configured for standard operation out of the box. For specific settings or advanced configurations (e.g., changing symbologies, adding prefixes/suffixes), refer to the full programming manual or scan configuration barcodes provided by CipherLab. These barcodes are usually found in a separate programming guide.

3. ຄໍາແນະນໍາການດໍາເນີນງານ

3.1 ຂັ້ນຕອນການສະແກນພື້ນຖານ

1. Ensure the imager is properly connected to your computer and powered on.
2. Open an application where you wish to input scanned data (e.g., a text editor, spreadsheet, or POS software).
3. Point the scanning window of the imager at the barcode you wish to scan.
4. Press and hold the trigger button. A red aiming beam will appear.
5. ວາງລຳແນມໃສ່ທາງກາງຂອງບາໂຄດ.
6. Once the barcode is successfully read, the imager will emit a short beep and the LED indicator will flash green. The data will then be transmitted to your computer as if typed from a keyboard.
7. ປ່ອຍປຸ່ມກະຕຸ້ນ.

3.2 Indicator Lights and Sounds

• Green LED Flash & Short Beep: Successful scan.
• Red LED (Steady): Imager is powered on and ready.
• No LED / No Power: Check USB connection.

4. ບໍາລຸງຮັກສາ

4.1 Cleaning the Imager

To ensure optimal performance, keep the scanning window clean. Use a soft, lint-free cloth lightly dampened with water or a mild, non-abrasive cleaner. Do not use harsh chemicals, solvents, or abrasive materials, as these can damage the device.

4.2 ການເກັບຮັກສາ

Store the imager in a cool, dry place away from direct sunlight and extreme temperatures. Protect it from drops and impacts when not in use.

5. ການແກ້ໄຂບັນຫາ

6. ຂໍ້ມູນຈໍາເພາະ

• ໝາຍເລກຕົວແບບ: A1504B2BSU001
• ຂະໜາດຜະລິດຕະພັນ: 10 x 2 x 2.7 ນິ້ວ
• ນ້ໍາຫນັກລາຍການ: 7 ອອນ
• ການເຊື່ອມຕໍ່: USB
• ປະເພດເຄື່ອງສະແກນ: ຮູບພາບ 2D

7. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

Information regarding product warranty and technical support is typically provided in a separate warranty card or can be found on the official CipherLab website. Please refer to these resources for detailed warranty terms, registration, and contact information for technical assistance.