Instruction Manual for zaMel ETERO RWS-211C/12V/N RWS Radio Switch

1. ການແນະນໍາແລະຜະລິດຕະພັນຫຼາຍກວ່າview

The zaMel ETERO RWS-211C/12V/N is a wireless surface-mounted radio switch designed for controlling up to four electrical devices. Its robust IP56 rating ensures protection against jet water, making it suitable for outdoor installations. This device offers a reliable control solution for various applications such as garage doors, pumps, lamps, and more, with an impressive outdoor range of up to 300 meters.

Utilizing Keeloq® coding technology from Microchip Technology USA, the RWS-211C/12V/N ensures secure and interference-free bidirectional transmission. Each transmission is dynamically re-encrypted, providing enhanced safety. Operating at a frequency of 433.92 MHz with low transmission power (<5mW), this radio switch does not require state approval.

2. ຄຸນນະສົມບັດທີ່ສໍາຄັນ

Wireless surface-mounted switch for outdoor installation (IP56 rated).
Controls up to 4 independent electrical devices.
Extended outdoor range of up to 300 meters.
Bidirectional, coded, and interference-free Keeloq® transmission.
Maximum connection power: 2000 W.
Load on one channel: 16 A / 250 V AC 4000 VA / AC1.
ຊ່ວງອຸນຫະພູມໃຊ້ງານ: -20°C ຫາ +35°C.
Requires 12 V operating voltage.

3. Product Components and Visuals

zaMel RWS-211C/12V/N Radio Switch with remote and antenna — **ຮູບທີ 3.1:** ເກີນview of the zaMel RWS-211C/12V/N Radio Switch system, showing the main receiver unit, detachable antenna, and the four-button remote control. The receiver unit features four output indicators (K1-K4) and a 12V AC/DC power indicator.

zaMel RWS-211C/12V/N Radio Switch held in hand for scale — **ຮູບທີ 3.2:** The zaMel RWS-211C/12V/N receiver unit shown held in a hand, illustrating its compact size and dimensions (approximately 4.7 inches or 12 cm in length). This view highlights the four cable glands at the bottom for secure wiring connections.

ດ້ານໜ້າ view of zaMel RWS-211C/12V/N Radio Switch receiver and remote — **ຮູບທີ 3.3:** ທາງຫນ້າໂດຍກົງ view of the zaMel RWS-211C/12V/N receiver unit and its accompanying remote control. This perspective clearly shows the "zaMel" branding on both devices, the four indicator LEDs (K1-K4) on the receiver, and the numbered buttons (1-4) on the remote.

4. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

Before beginning installation, ensure all power sources are disconnected to prevent electrical shock. It is recommended that installation be performed by a qualified electrician.

4.1 Mounting the Receiver Unit

Choose a suitable outdoor location for the receiver unit, ensuring it is within range of the devices to be controlled and the remote control. The IP56 rating allows for outdoor exposure.
Secure the receiver unit to a flat, stable surface using appropriate screws through the mounting holes located at the corners of the casing.
Attach the provided antenna to the designated connector on the receiver unit. Ensure it is securely fastened for optimal signal reception.

4.2 ການເຊື່ອມຕໍ່ສາຍໄຟ

The RWS-211C/12V/N requires a 12V AC/DC operating voltage. Use the cable glands at the bottom of the unit for secure and waterproof cable entry.

ການສະຫນອງພະລັງງານ: Connect a stable 12V AC/DC power supply to the designated terminals inside the receiver unit. Observe correct polarity if using DC.
ການເຊື່ອມຕໍ່ອຸປະກອນ: Connect the electrical devices (e.g., garage door opener, lamp, pump) to the respective output channels (K1, K2, K3, K4) within the receiver. Each channel can handle a load of up to 16 A / 250 V AC (4000 VA). Refer to the internal wiring diagram for specific terminal assignments.
ໃຫ້ແນ່ໃຈວ່າການເຊື່ອມຕໍ່ທັງຫມົດແມ່ນແຫນ້ນແຫນ້ນແລະຖືກ insulated ຢ່າງຖືກຕ້ອງ.

4.3 ການຈັບຄູ່ການຄວບຄຸມໄລຍະໄກ

The remote control typically comes pre-paired, but if re-pairing is necessary or if you are adding new remotes, follow the manufacturer's specific pairing procedure, which usually involves a button sequence on the receiver unit and the remote.

5. ຄໍາແນະນໍາການດໍາເນີນງານ

Once installed and powered, the zaMel RWS-211C/12V/N is ready for operation using the provided remote control.

The remote control features four numbered buttons (1, 2, 3, 4), each corresponding to one of the four output channels (K1, K2, K3, K4) on the receiver unit.
Pressing a button on the remote will toggle the state of the corresponding output channel on the receiver. For example, if channel K1 is connected to a lamp, pressing button '1' on the remote will turn the lamp ON, and pressing it again will turn it OFF.
The indicator LEDs (K1-K4) on the receiver unit will illuminate when their respective channels are active.
ໃຫ້ແນ່ໃຈວ່າຣີໂໝດຄວບຄຸມມີແບັດເຕີຣີໃໝ່ເພື່ອປະສິດທິພາບສູງສຸດ.

6. ບໍາລຸງຮັກສາ

The zaMel RWS-211C/12V/N is designed for durability and requires minimal maintenance.

ທໍາຄວາມສະອາດ: Periodically wipe the exterior of the receiver unit and remote control with a soft, damp ຜ້າ. ຢ່າໃຊ້ເຄື່ອງເຮັດຄວາມສະອາດຂັດຫຼືສານລະລາຍ.
ການເຊື່ອມຕໍ່: Occasionally check all wired connections to ensure they remain secure and free from corrosion, especially in outdoor environments.
ການປ່ຽນແບັດເຕີຣີ: Replace the remote control battery when its range decreases or it becomes unresponsive. Refer to the remote's specific instructions for battery type and replacement procedure.
ເສົາອາກາດ: Ensure the antenna remains upright and unobstructed for best signal performance.

7. ການແກ້ໄຂບັນຫາ

ບັນຫາ	ສາເຫດທີ່ເປັນໄປໄດ້	ການແກ້ໄຂ
ອຸປະກອນບໍ່ຕອບສະໜອງຕໍ່ຣີໂໝດ.	ແບດເຕີລີ່ໄລຍະໄກແມ່ນຕໍ່າຫຼືຕາຍ. ຕົວຮັບບໍ່ໄດ້ເປີດເຄື່ອງ. ໄລຍະໄກບໍ່ໄດ້ຈັບຄູ່ກັບເຄື່ອງຮັບ. ການຂັດຂວາງລະຫວ່າງຫ່າງໄກສອກຫຼີກແລະເຄື່ອງຮັບ. Device connected to receiver is faulty.	ປ່ຽນແບັດທາງໄກ. Check 12V power supply to receiver. Perform pairing procedure (refer to section 4.3). ຫຼຸດຜ່ອນໄລຍະຫ່າງ ຫຼື ກຳຈັດສິ່ງກີດຂວາງ. ທົດສອບອຸປະກອນທີ່ເຊື່ອມຕໍ່ໂດຍກົງ.
ຂອບເຂດປະຕິບັດການຫຼຸດລົງ.	ແບັດເຕີຣີທາງໄກຕໍ່າ. ການລົບກວນຈາກອຸປະກອນອື່ນໆ. ແອນເຕນນາຖືກອຸດຕັນ ຫຼື ເສຍຫາຍ.	ປ່ຽນແບັດທາງໄກ. Relocate receiver or identify source of interference. Check antenna connection and position.
Receiver LEDs not illuminating.	ບໍ່ມີພະລັງງານໄປຫາຕົວຮັບ. ຄວາມຜິດພາຍໃນ.	Verify 12V power supply connection. Contact customer support if power is confirmed.

8. ຂໍ້ກໍານົດດ້ານວິຊາການ

ຂະໜາດສິນຄ້າ	ຂະ ໜາດ 5.5 x 8.2 x 15.7 ຊມ; 560 ກ
ໝາຍເລກຕົວແບບ	RWS-211C/12V/N
ຮູບແບບການເຮັດວຽກ	ປິດແລ້ວ
ການຈັດອັນດັບປັດຈຸບັນ	16 Amps
ການດໍາເນີນງານ Voltage	12V AC / DC
ປະເພດການຕິດຕໍ່	ເປີດປົກກະຕິ
ປະເພດຕົວເຊື່ອມຕໍ່	ຄລາມເມີ
Maximum Connection Power	2000 ວ
Load per Channel	16 A / 250 V AC 4000 VA / AC1
ຊ່ວງອຸນຫະພູມປະຕິບັດການ	-20°C ເຖິງ +35°C
ຄວາມຖີ່ຂອງສາຍສົ່ງ	433.92 MHz
ການຈັດອັນດັບການປົກປ້ອງ	IP56

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For information regarding product warranty, please refer to the documentation included with your purchase or visit the official zaMel webເວັບໄຊ. ເງື່ອນໄຂການຮັບປະກັນອາດຈະແຕກຕ່າງກັນໄປຕາມພາກພື້ນ.

Should you encounter any issues or require technical assistance, please contact zaMel customer support. Contact details are typically available on the manufacturer's webສະຖານທີ່ຫຼືຢູ່ໃນການຫຸ້ມຫໍ່ຜະລິດຕະພັນ.

	ຄູ່ມືຜູ້ໃຊ້ ZAMEL ZCM-42 Time Programmer - Wi-Fi Configurable ຄູ່ມືການນໍາໃຊ້ທີ່ສົມບູນແບບສໍາລັບການ ZAMEL ZCM-42 Time Programmer, ລາຍລະອຽດການຕັ້ງຄ່າ Wi-Fi ຂອງຕົນ, ຄຸນນະສົມບັດການກໍານົດເວລາ, ສະເພາະດ້ານວິຊາການ, ສາຍໄຟ, ແລະການດໍາເນີນງານສໍາລັບການອັດຕະໂນມັດແລະລະບົບການຄວບຄຸມ.
	Zamel LLM-01 Wired Control Board for Floor Heating - Technical Specifications Detailed technical specifications and connection guide for the Zamel LLM-01 wired control board, designed for efficient floor heating systems.
	Zamel SRP-22 Sterownik Rolet Dopuszkowy - Instrukcja i Specyfikacja Techniczna Kompleksowa instrukcja obsługi i specyfikacja techniczna sterownika rolet Zamel SRP-22. Zawiera informacje o instalacji, konfiguracji, programowaniu radiowym i przez aplikację mobilną exta life, a także dane techniczne.
	MATEC RTP-04 ເຄື່ອງຄວບຄຸມອຸນຫະພູມທີ່ສາມາດຂຽນໄດ້ແບບໂປແກມສໍາລັບການເຮັດຄວາມຮ້ອນຊັ້ນໄຟຟ້າ - ຄູ່ມືຜູ້ໃຊ້ ຄູ່ມືການນໍາໃຊ້ທີ່ສົມບູນແບບສໍາລັບການຄວບຄຸມອຸນຫະພູມ MATEC RTP-04, ລາຍລະອຽດການຕິດຕັ້ງ, ການດໍາເນີນງານ, ການດໍາເນີນໂຄງການ, ແລະສະເພາະດ້ານວິຊາການສໍາລັບລະບົບເຮັດໃຫ້ຄວາມຮ້ອນ underfloor ໄຟຟ້າໂດຍ ZAMEL.
	Zamel Supla SBW-02 ຄູ່ມືຜູ້ໃຊ້ 2-Channel Wi-Fi Gate Controller ຄູ່ມືຜູ້ໃຊ້ທີ່ສົມບູນແບບສໍາລັບ Zamel Supla SBW-02, ຕົວຄວບຄຸມປະຕູ Wi-Fi 2 ຊ່ອງ. ຄູ່ມືນີ້ກວມເອົາລາຍລະອຽດຂອງຜະລິດຕະພັນ, ຄຸນສົມບັດ, ການເຕືອນໄພ, ຂໍ້ມູນສະເພາະທາງດ້ານວິຊາການ, ການຕິດຕັ້ງ ແລະ ການຕິດຕັ້ງແບບເທື່ອລະຂັ້ນຕອນໂດຍໃຊ້ແອັບ Supla, ການຣີເຊັດອຸປະກອນ, ຂໍ້ມູນການຮັບປະກັນ ແລະ ຊັບພະຍາກອນເພີ່ມເຕີມ.
	ຄູ່ມືການຕິດຕັ້ງ Mats ເຄື່ອງເຮັດຄວາມຮ້ອນໄຟຟ້າ MATEC ແລະການຮັບປະກັນ ຄໍາແນະນໍາໃນການຕິດຕັ້ງທີ່ສົມບູນແບບແລະລາຍລະອຽດການຮັບປະກັນສໍາລັບ mats ເຄື່ອງເຮັດຄວາມຮ້ອນໄຟຟ້າ MATEC (MOJ ແລະ MOD ຊຸດ) ໂດຍ ZAMEL, ກວມເອົາການຕິດຕັ້ງ, ການຄັດເລືອກເຄື່ອງຄວບຄຸມອຸນຫະພູມ, ແລະຂໍ້ກໍາຫນົດດ້ານວິຊາການສໍາລັບລະບົບຄວາມຮ້ອນຊັ້ນ.

zaMel RWS-211C/12V/N