ແນະນຳ
The TASCAM MiNiSTUDIO Personal US-32 is a desktop online broadcast studio designed for podcasters, gamers, and online broadcasters. It features a professional-quality audio interface and real-time effects to enhance your audio productions.
This manual provides instructions for setting up, operating, and maintaining your US-32 MiniStudio, along with troubleshooting tips and product specifications.
ຮູບທີ 1: The Tascam US-32 MiniStudio USB Podcasting Broadcast Audio Interface. This image provides a general overview ຂອງອຸປະກອນ.
ຕັ້ງຄ່າ
ເນື້ອໃນຊຸດ
ກວດສອບວ່າມີອົງປະກອບທັງຫມົດ:
- Tascam US-32 MiniStudio Unit
- ສາຍ USB
- ຄູ່ມືຜູ້ໃຊ້ (ເອກະສານນີ້)
ການເຊື່ອມຕໍ່ອຸປະກອນ
The US-32 MiniStudio connects to your computer via a USB 2.0 cable. It can be powered by the USB bus or an optional 5V DC adapter for tablet use.
- Connect the USB cable from the US-32 MiniStudio to an available USB port on your computer.
- If using with a tablet or requiring external power, connect a 5V DC power adapter (not included) to the "DC IN 5V" port.
- Ensure the POWER switch on the rear panel is in the "ON" position.
ຮູບທີ 2: Rear panel connections of the Tascam US-32 MiniStudio. This image displays the power switch, USB 2.0 port for computer connection, and the DC IN 5V port for external power, typically used with tablets.
ການຕິດຕັ້ງຊອບແວ
Before using the US-32 MiniStudio, install the necessary drivers and control software from the official Tascam website. The device supports ASIO/WDM for Windows and Core Audio for Mac.
- Visit the official Tascam support webເວັບໄຊ.
- Locate the drivers and control software for the US-32 MiniStudio.
- ດາວໂຫຼດ ແລະ ເປີດໃຊ້ໂປຣແກຣມຕິດຕັ້ງ, ໂດຍປະຕິບັດຕາມຄຳແນະນຳໃນໜ້າຈໍ.
- ປິດເປີດຄອມພິວເຕີຂອງທ່ານຄືນໃໝ່ຖ້າຖືກຖາມ.
ຄໍາແນະນໍາການດໍາເນີນງານ
Microphone Input Options
The US-32 MiniStudio offers versatile microphone input options:
- XLR/TRS Input Jack: For professional microphones, with switchable +48V phantom power for condenser microphones.
- Built-in Condenser Mic: For convenient, immediate use without external microphones.
- 4-pole Mini-jack: For connecting earphone/microphone headsets.
Ensure appropriate input gain is set using the dedicated knob to achieve optimal audio levels without distortion.
PON Sound Effect Buttons
The three assignable PON buttons allow for instant playback of sound effects. The unit comes with pre-loaded effects like bell, buzzer, and applause. You can also customize these buttons with your own .wav or .mp3 audio files using the control software.
- Open the US-32 MiniStudio control software on your computer.
- Navigate to the PON button assignment section.
- Double-click on a button in the software interface to select an audio file (.wav or .mp3) from your computer.
- Once assigned, press the physical PON button on the unit to trigger the sound effect during your broadcast.
Real-time Voice Effects
The US-32 MiniStudio includes real-time voice effects accessible via the control software. These effects can modify your voice with pitch shifts, echo, shortwave radio effects, and studio-quality reverb.
- Access voice effects through the control software.
- Adjust parameters such as pitch, echo depth, and reverb type.
- The "ducking" effect can automatically lower background music when you speak.
ຮູບທີ 3: Front panel of the Tascam US-32 MiniStudio. This image highlights the various control knobs for input levels, the three assignable PON sound effect buttons, and the prominent ON AIR button for broadcast control.
"ON AIR" Function
The "ON AIR" button integrates your voice and effects with other audio sources from your computer, such as music or video playback. Pressing this button activates the broadcast mix.
- Ensure all audio sources (microphone, computer audio, effects) are properly configured in the control software.
- Press the "ON AIR" button to begin broadcasting your mixed audio.
ການຕິດຕາມສຽງ
The US-32 MiniStudio provides two headphone outputs for monitoring: a 1/4" output and a 1/8" output (marked "headset"). Both outputs share a single volume control.
ຮູບທີ 4: Tascam US-32 MiniStudio in a typical usage scenario. The device is connected to a laptop, and headphones are plugged in, demonstrating its application in a broadcasting or podcasting setup.
ບໍາລຸງຮັກສາ
To ensure the longevity and optimal performance of your Tascam US-32 MiniStudio, follow these maintenance guidelines:
- ທໍາຄວາມສະອາດ: ໃຊ້ຜ້າປຽກແຫ້ງເພື່ອເຮັດຄວາມສະອາດດ້ານນອກຂອງເຄື່ອງ. ຫຼີກລ້ຽງການເຮັດຄວາມສະອາດຂັດ, solvents, ຫຼືຂີ້ເຜີ້ງ.
- ການເກັບຮັກສາ: ເກັບຮັກສາເຄື່ອງໄວ້ໃນບ່ອນທີ່ເຢັນ, ແຫ້ງແລ້ງຫ່າງຈາກແສງແດດໂດຍກົງ, ອຸນຫະພູມທີ່ຮຸນແຮງ, ແລະຄວາມຊຸ່ມຊື່ນສູງ.
- ການຈັດການ: ຈັດການອຸປະກອນດ້ວຍຄວາມລະມັດລະວັງ. ຫຼີກລ້ຽງການປະຖິ້ມມັນຫຼືການຮັບຜົນກະທົບທີ່ເຂັ້ມແຂງ.
- ການລະບາຍອາກາດ: ຮັບປະກັນການລະບາຍອາກາດທີ່ເຫມາະສົມຮອບຫນ່ວຍເພື່ອປ້ອງກັນຄວາມຮ້ອນເກີນ. ຫ້າມປິດຊ່ອງລະບາຍອາກາດໃດໆ.
- ປິດພະລັງງານ: Always power off the unit and disconnect it from the power source when not in use for extended periods or during electrical storms.
ການແກ້ໄຂບັນຫາ
If you encounter issues with your US-32 MiniStudio, refer to the following common problems and solutions:
No Sound or Low Audio Output
- ກວດສອບການເຊື່ອມຕໍ່: Ensure all cables (USB, microphone, headphones) are securely connected.
- ລະດັບສຽງ: Verify that the input gain knobs on the US-32 and the master volume control are turned up. Check software volume settings on your computer.
- ພະລັງງານ Phantom: If using a condenser microphone, ensure +48V phantom power is enabled for the XLR input.
- ປະເພດໄມໂຄຣໂຟນ: Some high-end dynamic microphones may require an external preamp for optimal gain, as the built-in preamps might not provide sufficient amplification for all models.
- ການຕັ້ງຄ່າຊອບແວ: Confirm that the US-32 MiniStudio is selected as the default audio input/output device in your computer's sound settings and your broadcasting software.
Background Noise or Hum
- Ground Loop: Try connecting the computer and US-32 to the same power outlet or using a ground loop isolator.
- ຄຸນະພາບສາຍໄຟ: Use high-quality, shielded cables for microphones and other connections.
- ໄດ້ຮັບ S.tagໃນ: Ensure input gain is set appropriately. Too high gain can ampliify ສິ່ງລົບກວນ.
- ສະພາບແວດລ້ອມ: Minimize electrical interference from other devices (e.g., fluorescent lights, power adapters).
PON Buttons or Effects Not Working
- Software Running: The PON buttons and voice effects require the Tascam control software to be running in the background.
- ການມອບໝາຍ: Verify that sound files are correctly assigned to the PON buttons within the software.
- Default Audio Device: Ensure the US-32 is set as the default audio device, as some effects may route through it.
ຄອມພິວເຕີບໍ່ຮັບຮູ້ອຸປະກອນ
- ການເຊື່ອມຕໍ່ USB: ລອງໃຊ້ພອດ USB ຫຼື ສາຍ USB ອື່ນ.
- ຄົນຂັບລົດ: Reinstall the latest drivers from the Tascam webເວັບໄຊ.
- ພະລັງງານ: Ensure the unit is powered on. If using external power, verify the adapter is working.
- ຣີສະຕາດ: Restart your computer and the US-32 MiniStudio.
ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ຂໍ້ມູນຈໍາເພາະ |
|---|---|
| ໝາຍເລກຕົວແບບ | US-32 |
| ນ້ໍາຫນັກລາຍການ | 13.4 ອອນ |
| ຂະໜາດສິນຄ້າ | 5.11 x 5.9 x 1.57 ນິ້ວ |
| ການໂຕ້ຕອບຮາດແວ | USB |
| ເຕັກໂນໂລຊີການເຊື່ອມຕໍ່ | USB |
| ຈໍານວນຊ່ອງ | 4 |
| ອຸປະກອນທີ່ເຂົ້າກັນໄດ້ | ຄອມພິວເຕີສ່ວນບຸກຄົນ |
| ຊອບແວທີ່ຮອງຮັບ | ASIO/WDM (for Windows), Core Audio (for Mac) |
| ລະບົບປະຕິບັດການ | Windows (and Mac via Core Audio) |
| ສະບັບtage | 48 ໂວນ (ສຳລັບພະລັງງານ phantom) |
| ໝໍ້ໄຟ | ຕ້ອງມີແບັດເຕີຣີ AA 6 ໜ່ວຍ |
| ວັນທີທໍາອິດທີ່ມີ | ວັນທີ 6 ພຶດສະພາ 2016 |
Note: While specifications mention "6 AA batteries required," the primary power source for the US-32 is typically USB bus power or an optional 5V DC adapter. Please refer to the official Tascam documentation for definitive power requirements.
ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
For warranty information, technical support, or service inquiries, please contact Tascam customer support directly or visit their official webເວັບໄຊ. ຮັກສາຫຼັກຖານການຊື້ຂອງທ່ານສໍາລັບການຮ້ອງຂໍການຮັບປະກັນ.
Tascam Official Webເວັບໄຊ: https://tascam.com/us/
