Steinbach Classic 250N Filtration System

1. ຜະລິດຕະພັນເກີນview

The Steinbach Classic 250N Filtration System is a high-performance sand filter designed to maintain clean and clear water in above-ground pools. This powerful unit is suitable for pools with a capacity of up to 19,000 liters, ensuring efficient removal of impurities. It features a robust pump and a versatile 7-way valve for various operational modes.

2. ຂໍ້ມູນຄວາມປອດໄພ

ກະລຸນາອ່ານຄຳແນະນຳດ້ານຄວາມປອດໄພທັງໝົດຢ່າງລະອຽດກ່ອນການຕິດຕັ້ງ ແລະ ການດຳເນີນງານເພື່ອປ້ອງກັນການບາດເຈັບ ຫຼື ຄວາມເສຍຫາຍ. ເກັບຄູ່ມືນີ້ໄວ້ເພື່ອອ້າງອີງໃນອະນາຄົດ.

• ສະເຫມີຕັດການເຊື່ອມຕໍ່ການສະຫນອງພະລັງງານກ່ອນທີ່ຈະດໍາເນີນການບໍາລຸງຮັກສາຫຼືທໍາຄວາມສະອາດໃນລະບົບການກັ່ນຕອງ.
• Ensure the electrical outlet is protected by a Ground Fault Circuit Interrupter (GFCI) for safety.
• ຢ່າໃຊ້ປ້ຳຖ້າອຸນຫະພູມນ້ຳສູງກວ່າ 35°C (95°F).
• ໃຫ້ເດັກນ້ອຍຢູ່ຫ່າງຈາກລະບົບຕົວກອງໃນລະຫວ່າງການປະຕິບັດງານ.
• Ensure all connections are secure and leak-free to prevent water damage or electrical hazards.
• The pump is not self-priming; ensure it is filled with water before starting.

3. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

Proper installation is crucial for the optimal performance of your filtration system. Follow these steps carefully:

3.1 ການຫຸ້ມຫໍ່ແລະການກວດສອບອົງປະກອບ

ກວດ​ສອບ​ວ່າ​ອົງ​ປະ​ກອບ​ທັງ​ຫມົດ​ແມ່ນ​ມີ​ແລະ​ບໍ່​ເສຍ​ຫາຍ​:

• Filter Tank (250 mm diameter)
• Pump Unit (230V / 200W)
• 7-Way Multi-Port Valve with Pressure Gauge
• Connecting Hoses (32/38 mm diameter)
• ຖານແຜ່ນ
• Clamps and Fittings

3.2 Filter Media Preparation

The system requires approximately 10 kg of filter sand with a granule size of 0.7 - 1.2 mm, or compatible filter balls. Refer to the specific instructions for filling the filter tank with your chosen media.

3.3 Assembly and Connection

1. Place the base plate on a firm, level surface near your pool.
2. Mount the filter tank and pump securely onto the base plate.
3. Connect the pump to the filter tank and the multi-port valve using the provided hoses and fittings. Ensure all connections are tight to prevent leaks.
4. Connect the system to your pool's skimmer and return lines using 32/38 mm hoses.

3.4 ການຈັດວາງທີ່ດີທີ່ສຸດ

For gravity-fed operation, the water level in the pool should be above the sand filter. Avoid situations where the water level is below the filter, as this can hinder proper flow and operation.

4. ຄໍາແນະນໍາການດໍາເນີນງານ

The 7-way multi-port valve allows for different operational modes. Always turn off the pump before changing the valve position.

• ການກັ່ນຕອງ: This is the standard operating mode for daily filtration. Water is pumped through the filter media, and clean water is returned to the pool.
• BACKWASH: Used to clean the filter media. Water flows in reverse through the filter, dislodging trapped debris, which is then discharged to waste. Perform when pressure gauge indicates high pressure.
• ລ້າງອອກ: Used after backwashing to flush out any remaining debris from the filter media and lines before returning to FILTER mode. Water is discharged to waste.
• WASTE (EMPTY): ຂ້າມຕົວກອງ ແລະ ສູບນ້ຳໂດຍກົງອອກຈາກສະລອຍນ້ຳເພື່ອເສຍສິ່ງເສດເຫຼືອ. ເປັນປະໂຫຍດສໍາລັບການຫຼຸດລະດັບນ້ໍາໃນສະນຸກເກີຫຼືສູນຍາກາດຂີ້ເຫຍື້ອຢ່າງຮຸນແຮງໂດຍກົງກັບສິ່ງເສດເຫຼືອ.
• RECIRCULATE (CIRCULATE): ຂ້າມຕົວກອງ ແລະ ໝູນວຽນນ້ຳໂດຍກົງກັບຄືນສູ່ສະລອຍນ້ຳ. ເປັນປະໂຫຍດສໍາລັບການແຈກຢາຍສານເຄມີໂດຍບໍ່ມີການກອງ.
• ປິດ: Closes all flow to the filter. Use only when the pump is off and for maintenance tasks that require isolating the filter.

To start operation, ensure the valve is set to FILTER, then turn on the pump. Monitor the pressure gauge for normal operating pressure.

5. ບໍາລຸງຮັກສາ

Regular maintenance ensures the longevity and efficiency of your Steinbach filtration system.

5.1 ການລ້າງຫຼັງ ແລະ ການລ້າງອອກ

Perform backwashing when the pressure gauge reading is 0.2-0.3 bar (3-5 psi) above the clean filter pressure, or when water flow to the pool decreases significantly. Follow with a rinse cycle.

1. ປິດປັ.ມ.
2. ຕັ້ງວາວເປັນ BACKWASH.
3. Turn on the pump and backwash until the water in the sight glass (if present) runs clear (typically 2-3 minutes).
4. ປິດປັ.ມ.
5. ຕັ້ງວາວໃຫ້ RINSE.
6. Turn on the pump and rinse for 30-60 seconds.
7. ປິດປັ.ມ.
8. Set the valve back to FILTER.
9. ເປີດປັ໊ມເພື່ອສືບຕໍ່ການກັ່ນຕອງປົກກະຕິ.

5.2 ການປ່ຽນວັດສະດຸກອງ

Filter sand typically needs replacement every 3-5 years, depending on usage and water quality. Filter balls may require periodic cleaning or replacement as per their specific instructions.

5.3 ລະດູໜາວ

Before freezing temperatures, drain all water from the pump, filter tank, and hoses. Store the pump and valve in a dry, frost-free location. Cover the filter tank if it remains outdoors.

6. ການແກ້ໄຂບັນຫາ

ອ້າງອີງໃສ່ພາກນີ້ສໍາລັບບັນຫາທົ່ວໄປແລະການແກ້ໄຂທີ່ເປັນໄປໄດ້ຂອງພວກເຂົາ.

7. ຂໍ້ກໍານົດດ້ານວິຊາການ

8. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For specific warranty details and terms, please refer to the documentation provided with your purchase. In general, products purchased through Amazon may be eligible for returns or replacements within 30 days, subject to Amazon's return policy.

For technical support, spare parts, or further assistance, please contact Steinbach customer service. Contact information can typically be found on the manufacturer's webສະຖານທີ່ຫຼືຢູ່ໃນການຫຸ້ມຫໍ່ຜະລິດຕະພັນ.