Keeley Bubble Tron Dynamic Flanger Phaser Instruction Manual

1. ຜະລິດຕະພັນເກີນview

The Keeley Bubble Tron Dynamic Flanger Phaser and Random Synth Filter is a versatile effects pedal designed to produce unique modulation sounds. Inspired by classic dynamic flangers and phasers, this pedal offers three distinct modes of operation: Dynamic Flange, Dynamic Phase, and Random Filter. It allows for expressive control over your guitar's signal, reacting to your pick attack and playing dynamics to create a range of sonic textures.

Figure 1: Keeley Bubble Tron Dynamic Flanger Phaser Pedal.

The pedal features a simple yet powerful control layout, allowing users to dial in subtle or extreme effects. Its dynamic response makes it an intuitive tool for guitarists seeking to add expressive modulation to their sound.

2. ຕັ້ງຄ່າ

To set up your Keeley Bubble Tron pedal, follow these steps:

1. ການເຊື່ອມຕໍ່ພະລັງງານ: Connect a standard 9V DC power supply (center negative, 65mA+ current draw) to the 9V jack on the pedal. Ensure the power supply meets these specifications to prevent damage.
2. ການເຊື່ອມຕໍ່ຂາເຂົ້າ: Connect your guitar or other instrument to the "INPUT" jack on the right side of the pedal using a standard 1/4-inch instrument cable.
3. ການເຊື່ອມຕໍ່ຂາອອກ: Connect the "OUTPUT" jack on the left side of the pedal to your ampເຄື່ອງເພີ່ມສັນຍານ ຫຼື ກະເບື້ອງຕໍ່ໄປໃນລະບົບຕ່ອງໂສ້ສັນຍານຂອງທ່ານໂດຍໃຊ້ສາຍເຄເບີ້ນເຄື່ອງມືມາດຕະຖານຂະໜາດ 1/4 ນິ້ວ.
4. ການຕັ້ງຄ່າເບື້ອງຕົ້ນ: Before engaging the pedal, set all knobs to their 12 o'clock position and ensure the mode switch is in the middle (Phase) position for a neutral starting point.

3. ຄໍາແນະນໍາການດໍາເນີນງານ

The Keeley Bubble Tron offers a variety of controls to shape your sound. Familiarize yourself with each knob and switch:

ການຄວບຄຸມ:

• RATE (FDBK):
  • In Filter & Phase modes: Controls the rate of the LFO.
  • In Flange mode: Controls feedback. Turning left provides maximum negative feedback; turning right provides maximum positive feedback.
• SENS (ຄວາມອ່ອນໄຫວ):
  • In Filter mode: Controls envelope sensitivity, acting like a synth filter.
  • In Phase & Flange modes: Controls input sensitivity, determining the point at which dynamic control is triggered. Start with this knob at full left and adjust for desired responsiveness.
• DEPTH (Shape):
  • In Filter mode: Selects LFO shape (from full left: ramp ຂຶ້ນ, ramp down, random, or triangle).
  • In Phase & Flange modes: Sets the depth of the effect for mild or lush sounds.
• ລະດັບ: ຄວບຄຸມລະດັບຜົນຜະລິດໂດຍລວມຂອງຜົນກະທົບ.
• ຕີນສະວິດ: Toggles the effect on and off.

Mode Select Switch:

• ຂຶ້ນ: Activates Filter mode.
• ກາງ: Activates Phase mode.
• ລົງ: Activates Flange mode.

Figure 2: Bank A (Default Mode) Control Layout. This mode is active when the internal switch is set to Bank A.

Internal Mini Toggles (Bank Selection):

The Bubble Tron features internal mini toggles to expand its sonic capabilities. To access these, you will need to remove the back plate of the pedal.

• ANALOG FILTER (Vintage/Modern):
  • ວິນtage ໂໝດ: Rolls off some high frequencies for a warmer tone.
  • Modern Mode: Provides full-range clarity (default setting).
• BANK TOGGLE (Bank 1/Bank 2):
  • Bank 1 (Default): Offers Sample & Hold Filter, Dynamic Phaser, and Dynamic Flanger modes.
  • ທະນາຄານ 2: Offers Envelope Filter, Standard 8-Stage Phaser, and Standard Classic Flanger modes.

Figure 3: Bank B Control Layout. Access this mode by switching the internal Bank Toggle from Bank A to Bank B.

Figure 4: Internal Mini Toggles for Analog Filter and Bank Selection.

Figure 5: External Toggle Switch modes for Bank 1 and Bank 2.

4. ບໍາລຸງຮັກສາ

To ensure the longevity and optimal performance of your Keeley Bubble Tron, observe the following maintenance guidelines:

• ທໍາຄວາມສະອາດ: Use a soft, dry cloth to clean the pedal's exterior. Avoid abrasive cleaners or solvents, as these can damage the finish.
• ການເກັບຮັກສາ: ເກັບຮັກສາຄັນເລັ່ງໄວ້ໃນບ່ອນທີ່ເຢັນ, ແຫ້ງ ແລະ ຫ່າງຈາກແສງແດດໂດຍກົງ ແລະ ອຸນຫະພູມສູງເກີນໄປ. ເມື່ອບໍ່ໄດ້ໃຊ້ງານເປັນເວລາດົນ, ໃຫ້ຖອດສາຍໄຟອອກ.
• ການສະຫນອງພະລັງງານ: Always use a regulated 9V DC power supply with a center-negative polarity and sufficient current (65mA+). Incorrect power supplies can cause damage and void the warranty.
• ການເຊື່ອມຕໍ່: Ensure all cables are securely connected. Avoid excessive force when plugging or unplugging cables.

5. ການແກ້ໄຂບັນຫາ

If you encounter issues with your Keeley Bubble Tron, try these troubleshooting steps:

• ບໍ່ມີສຽງ:
  • ກວດສອບການເຊື່ອມຕໍ່ສາຍທັງໝົດ (ອິນພຸດ, ອໍພຸດ, ພະລັງງານ).
  • Verify the power supply is correctly connected and providing the specified 9V DC.
  • Ensure your instrument and amplifier ເຮັດວຽກຢ່າງຖືກຕ້ອງ.
  • Bypass the pedal to confirm the issue is with the pedal itself.
• ສິ່ງລົບກວນທີ່ບໍ່ຕ້ອງການ / Hum:
  • Use a high-quality, isolated power supply.
  • ກວດ​ສອບ​ສໍາ​ລັບ​ສາຍ​ໄຟ​ຜິດ​ພາດ​.
  • ຮັບ​ປະ​ກັນ​ການ​ພື້ນ​ຖານ​ທີ່​ເຫມາະ​ສົມ​ຂອງ​ທ່ານ​ amplifier ແລະອຸປະກອນອື່ນໆ.
• Effect Not Engaging/Responding:
  • Check the footswitch functionality.
  • Adjust the SENS (Sensitivity) knob, especially in dynamic modes, to ensure it's set appropriately for your playing style and instrument output.
  • Verify the MODE SELECT switch is in the desired position.

6. ຂໍ້ມູນຈໍາເພາະ

7. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information and technical support, please refer to the official Keeley Electronics webເວັບໄຊ ຫຼືຕິດຕໍ່ບໍລິການລູກຄ້າຂອງເຂົາເຈົ້າໂດຍກົງ. ຮັກສາຫຼັກຖານການຊື້ຂອງທ່ານສໍາລັບການຮຽກຮ້ອງການຮັບປະກັນໃດໆ.

ທາງການ Webເວັບໄຊ: Keeley Electronics Store