Generac 6922 Gas Powered Pressure Washer User Manual

ຄໍາແນະນໍາຄວາມປອດໄພທີ່ສໍາຄັນ

Before operating the Generac 6922 pressure washer, read and understand all safety warnings and instructions in this manual. Failure to follow these instructions may result in serious injury or property damage.

• Always wear appropriate personal protective equipment, including eye protection, hearing protection, and protective footwear.
• ຢ່າເອົາປືນສີດໃສ່ຄົນ, ສັດລ້ຽງ, ຫຼືອຸປະກອນໄຟຟ້າ. ສີດທີ່ມີຄວາມກົດດັນສູງສາມາດເຮັດໃຫ້ເກີດການບາດເຈັບທີ່ຮຸນແຮງ.
• Ensure all connections are secure before starting the unit to prevent leaks and loss of pressure.
• Operate the pressure washer in a well-ventilated area to avoid carbon monoxide poisoning from engine exhaust.
• Do not operate the unit if any parts are damaged or missing. Contact Generac customer support for replacement parts.
• ຮັກສາເດັກນ້ອຍ ແລະຜູ້ຢືນຢູ່ຫ່າງຈາກພື້ນທີ່ປະຕິບັດງານ.
• Use only approved fuels and oils as specified in this manual. Store fuel in approved containers and away from ignition sources.
• Always engage the spray gun trigger safety lock when not spraying to prevent accidental discharge.

ສິນຄ້າເກີນview

The Generac 6922 is a gas-powered pressure washer designed for medium-duty residential cleaning tasks. It delivers 2800 PSI and 2.4 GPM, making it suitable for cleaning decks, siding, driveways, and vehicles. Key features include an ergonomic spray gun, integrated detergent tank, and quick-change nozzle tips.

ຮູບ 1: ດ້ານຫນ້າ view of the Generac 6922 Gas Powered Pressure Washer.

ອົງປະກອບຫຼັກ

• ເຄື່ອງຈັກ: Generac OHV horizontal-shaft engine provides reliable power.
• ປ້ຳ: Delivers high-pressure water for effective cleaning.
• ປືນສີດ: Ergonomic design with cushion grip and easy-to-pull trigger for reduced fatigue.
• ທໍ່ຄວາມດັນສູງ: ທໍ່ທໍ່ 25 ຟຸດສໍາລັບການເຂົ້າເຖິງຂະຫຍາຍ.
• ເຄັດລັບ Nozzle: Includes 0-degree, 25-degree, 40-degree, and soap nozzles for various applications.
• ຖັງຊັກຟອກ: Integrated 0.5-gallon tank for convenient on-board detergent storage.
• ລໍ້: 10-inch never-flat wheels for easy maneuverability across different terrains.
• ກະດານຄວບຄຸມ: User-friendly controls for on/off, choke, and fuel shutoff.

ຮູບ 2: ດ້ານຫນ້າ view of the pressure washer, showing the control panel and spray gun holder.

ຮູບ 3: ຂ້າງ view of the pressure washer, highlighting the engine and pump assembly.

ຮູບ 4: ດ້ານຫລັງ view of the pressure washer, showing the hose connection point.

Figure 5: Close-up of the integrated hose storage on the handle.

Figure 6: Close-up of the Generac OHV engine, showing the fuel cap and pull start.

Figure 7: Close-up of the integrated 0.5-gallon detergent tank.

Figure 8: Close-up of the pump connections, including the water inlet and high-pressure outlet.

ການຕິດຕັ້ງແລະການປະກອບ

1. ການຫຸ້ມຫໍ່

Carefully remove all components from the packaging. Inspect for any damage during shipping. Ensure all parts listed in the packing list are present.

2. Handle Assembly

1. Slide the upper handle assembly onto the lower frame until the spring buttons engage.
2. Secure the handle with the provided knobs or bolts, ensuring it is firmly in place.

3. Connecting the Spray Gun and Hose

1. Connect the high-pressure hose to the pump outlet. Tighten securely, preferably with a wrench to prevent leaks.
2. Connect the other end of the high-pressure hose to the spray gun. Ensure a tight connection.
3. Insert the desired quick-change nozzle tip into the spray gun wand until it clicks into place.

4. ເພີ່ມນ້ຳມັນເຄື່ອງ

The engine may be shipped without oil. Refer to the engine manual for specific oil type and capacity. Typically, 10W-30 oil is recommended. Do not overfill.

1. ວາງເຄື່ອງຊັກຜ້າຄວາມກົດດັນໃສ່ພື້ນຜິວທີ່ມີລະດັບ.
2. ເອົາຝາປິດໃສ່ນໍ້າມັນ/ຈຸ່ມ.
3. Slowly add the recommended engine oil until it reaches the full mark on the dipstick.
4. ປ່ຽນຝາປິດ/ໄມ້ວັດລະດັບນ້ຳມັນເຄື່ອງ.

5. ການເພີ່ມນໍ້າມັນ

Use fresh, unleaded gasoline with an octane rating of 87 or higher. Do not use E85 fuel. Always add fuel in a well-ventilated area away from ignition sources.

1. ໃຫ້ແນ່ໃຈວ່າເຄື່ອງຈັກປິດແລະເຢັນ.
2. ຖອດຝານໍ້າມັນອອກ.
3. Fill the fuel tank, leaving some space for expansion. Do not overfill.
4. ປ່ຽນຝາອັດນ້ຳມັນຢ່າງປອດໄພ.

6. ການເຊື່ອມຕໍ່ການສະຫນອງນ້ໍາ

Connect a standard garden hose to the water inlet on the pump. Ensure the garden hose is free of kinks and has sufficient flow. Turn on the water supply completely before starting the engine.

ການດໍາເນີນງານ

1. Pre-Start Checklist

• ກວດເບິ່ງລະດັບນໍ້າມັນເຄື່ອງ.
• ກວດເບິ່ງລະດັບນໍ້າມັນ.
• ໃຫ້ແນ່ໃຈວ່າການສະຫນອງນ້ໍາເຊື່ອມຕໍ່ແລະເປີດ.
• Select and install the appropriate nozzle.
• ໃຫ້ແນ່ໃຈວ່າການເຊື່ອມຕໍ່ທໍ່ທັງຫມົດແມ່ນແຫນ້ນ.

2. ການເລີ່ມຕົ້ນເຄື່ອງຈັກ

1. Open the fuel valve (if equipped).
2. Move the choke lever to the 'CHOKE' position (cold engine).
3. ຕັ້ງສະຫຼັບເຄື່ອງຈັກເປັນ 'ON'.
4. ດຶງເຊືອກ starter ແຫນ້ນຈົນກ່ວາເຄື່ອງຈັກເລີ່ມຕົ້ນ.
5. ເມື່ອເຄື່ອງຈັກເລີ່ມຕົ້ນ, ຄ່ອຍໆຍ້າຍ choke lever ໄປຕໍາແຫນ່ງ 'RUN'.
6. Allow the engine to warm up for a few moments.

3. Using Detergent

The integrated 0.5-gallon detergent tank allows for easy application of cleaning solutions.

1. Fill the detergent tank with pressure washer safe detergent.
2. Install the black soap nozzle onto the spray gun. This nozzle activates the detergent injector.
3. Spray the detergent onto the surface to be cleaned. Allow it to soak for a few minutes (do not let it dry).
4. Switch to a high-pressure nozzle (e.g., 25-degree) to rinse the surface thoroughly.

4. ການເລືອກຫົວສີດ

The Generac 6922 includes four quick-change nozzle tips:

• 0-degree (Red): ນ້ຳລາຍຈຸດສຳລັບທຳຄວາມສະອາດຈຸດນ້ອຍໆທີ່ເຄັ່ງຄັດ. ໃຊ້ດ້ວຍຄວາມລະມັດລະວັງທີ່ສຸດ.
• 25-degree (Green): ສະເປພັດລົມເພື່ອທໍາຄວາມສະອາດທົ່ວໄປຂອງພື້ນຜິວສ່ວນໃຫຍ່.
• 40-degree (White): Wide fan spray for gentle cleaning of delicate surfaces.
• ສະບູ່ (ສີດໍາ): ກະແສຄວາມກົດດັນຕ່ໍາສໍາລັບການສະຫມັກຂໍເອົາ detergents.

5. ຂັ້ນຕອນການທໍາຄວາມສະອາດ

• Always start spraying with the nozzle a safe distance from the surface and move closer as needed.
• Use overlapping strokes to ensure even cleaning.
• Work from top to bottom when cleaning vertical surfaces to prevent streaking.

6. ການປິດເຄື່ອງ

1. If using detergent, flush the system with clean water by running the pressure washer with the soap nozzle in a bucket of clean water until all detergent is cleared.
2. ປິດສະຫຼັບເຄື່ອງຈັກ.
3. ປິດການສະຫນອງນ້ໍາ.
4. ບີບກະບອກປືນສີດເພື່ອປ່ອຍຄວາມກົດດັນທີ່ຍັງເຫຼືອຢູ່ໃນລະບົບ.
5. ຕັດທໍ່ທໍ່ສວນ ແລະທໍ່ແຮງດັນສູງ.

ບໍາລຸງຮັກສາ

Regular maintenance ensures optimal performance and extends the life of your pressure washer. Always perform maintenance with the engine off and cool, and the spark plug wire disconnected.

1. ການປ່ຽນນ້ຳມັນເຄື່ອງ

Change the engine oil after the first 5 hours of operation, then every 50 hours or annually, whichever comes first. Refer to the engine manual for detailed instructions.

2. ການທຳຄວາມສະອາດ/ປ່ຽນເຄື່ອງກອງອາກາດ

Inspect the air filter regularly and clean or replace it as needed, especially in dusty conditions. A dirty air filter can reduce engine performance.

3. ການກວດກາປລັກສຽບໄຟ

Inspect the spark plug annually or every 100 hours. Clean or replace if fouled or damaged. Ensure proper gap setting.

4. ການບຳລຸງຮັກສາປັ໊ມ

After each use, flush the pump with clean water. For extended storage, use a pump protector to prevent freezing and corrosion.

5. ການເກັບຮັກສາ

Before storing the pressure washer for an extended period:

• Drain all fuel from the tank or add a fuel stabilizer.
• ລະບາຍ carburetor ໄດ້.
• ປ່ຽນນ້ຳມັນເຄື່ອງ.
• Apply pump protector.
• Store in a clean, dry, and frost-free area.

ການແກ້ໄຂບັນຫາ

ຂໍ້ມູນຈໍາເພາະ

ຂໍ້ມູນການຮັບປະກັນ

This Generac pressure washer is covered by a manufacturer's limited warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the warranty card included with your product or visit the official Generac webເວັບໄຊ. ຮັກສາຫຼັກຖານການຊື້ຂອງທ່ານສໍາລັບການຮ້ອງຂໍການຮັບປະກັນ.

ການຊ່ວຍເຫຼືອລູກຄ້າ

For technical assistance, replacement parts, or service inquiries, please contact Generac customer support. You can find contact information on the Generac website or in the documentation provided with your pressure washer. Have your model number (6922) and serial number ready when contacting support.