ແນະນຳ
This manual provides essential information for the safe and effective installation, operation, and maintenance of your OSRAM SYLVANIA OCTRON 800 ECOLOGIC Linear Fluorescent Lamp, Model 22136. This T8 lamp is designed for general illumination applications, offering neutral white light with a color temperature of 3500K and a high Color Rendering Index (CRI) of 82. Please read this manual thoroughly before installation and retain it for future reference.
Image: OSRAM SYLVANIA OCTRON 800 ECOLOGIC Linear Fluorescent Lamp, Model 22136. This image displays the linear fluorescent tube, typically used in commercial or industrial lighting fixtures.
ຂໍ້ມູນຄວາມປອດໄພ
ປະຕິບັດຕາມຄວາມລະມັດລະວັງດ້ານຄວາມປອດໄພຕໍ່ໄປນີ້ສະເໝີເພື່ອປ້ອງກັນການບາດເຈັບ ຫຼືຄວາມເສຍຫາຍ:
- ຕັດການເຊື່ອມຕໍ່ພະລັງງານ: Before installing, replacing, or cleaning the lamp, ensure the power supply to the fixture is turned off at the circuit breaker or fuse box.
- ຈັດການດ້ວຍຄວາມລະມັດລະວັງ: l Fluorescentamps are made of glass and can break. Handle them carefully to avoid injury from broken glass or exposure to internal components.
- ການກໍາຈັດທີ່ຖືກຕ້ອງ: l Fluorescentamps ມີຈໍານວນຂະຫນາດນ້ອຍຂອງ mercury. ຖິ້ມ lampຕາມລະບຽບຂອງທ້ອງຖິ່ນ, ລັດ, ແລະລັດຖະບານກາງ. ຢ່າຖິ້ມລົງໃນຖັງຂີ້ເຫຍື້ອທົ່ວໄປໃນຄົວເຮືອນ.
- ຄວາມເຂົ້າກັນໄດ້: ຮັບປະກັນ lamp is compatible with your fixture's ballast and socket type (Medium Bi-pin). Using an incompatible lamp can cause damage to the lamp ຫຼື fixture, ຫຼືສ້າງອັນຕະລາຍໄຟ.
- ຢ່າເຮັດໃຫ້ມືດມົວ: ນີ້ lamp is not designed for use with dimmers unless explicitly stated on the lamp or packaging.
- ອຸນຫະພູມປະຕິບັດການ: Ensure the operating environment is within the specified temperature range for fluorescent lamps.
ການຕິດຕັ້ງແລະການຕິດຕັ້ງ
ປະຕິບັດຕາມຂັ້ນຕອນເຫຼົ່ານີ້ສໍາລັບການຕິດຕັ້ງທີ່ເຫມາະສົມ:
- ປິດພະລັງງານ: ປິດໄຟໄປຫາອຸປະກອນໄຟຢູ່ທີ່ເບຣກເກີຫຼັກ.
- ເອົາ L ເກົ່າອອກamp (ຖ້າມີ): ບິດ fluorescent ເກົ່າຢ່າງລະມັດລະວັງamp 90 degrees and gently pull it out of the fixture's sockets.
- ກວດສອບ Fixture: Check the fixture's sockets and wiring for any signs of damage or wear. Replace any damaged components before proceeding.
- ໃສ່ໃໝ່ Lamp: Align the bi-pin ends of the OSRAM SYLVANIA 22136 lamp with the slots in the fixture's sockets. Gently push the lamp into the sockets until the pins are fully seated, then twist the lamp 90 degrees to lock it into place. Ensure the lamp is securely seated and makes good electrical contact.
- ຟື້ນຟູພະລັງງານ: ເມື່ອ lamp ຖືກຕິດຕັ້ງຢ່າງປອດໄພ, ຟື້ນຟູພະລັງງານກັບ fixture ຢູ່ breaker ວົງຈອນ.
- ການທົດສອບ: ເປີດສະວິດໄຟເພື່ອກວດສອບການເຮັດວຽກທີ່ເຫມາະສົມ.
ຄໍາແນະນໍາການດໍາເນີນງານ
The OSRAM SYLVANIA 22136 fluorescent lamp operates in conjunction with a compatible fluorescent ballast within your lighting fixture. Once installed, operation is straightforward:
- ເປີດ/ປິດ: Use the wall switch or fixture control to turn the lamp ເປີດ ຫຼື ປິດ.
- ເວລາອຸ່ນເຄື່ອງ: l Fluorescentamps may require a brief warm-up period to reach full brightness, especially in colder environments.
- ການດໍາເນີນງານປົກກະຕິ: ທamp will provide consistent, neutral white light during its operational lifespan.
ບໍາລຸງຮັກສາ
Minimal maintenance is required for the OSRAM SYLVANIA 22136 lamp ເພື່ອຮັບປະກັນປະສິດທິພາບທີ່ດີທີ່ສຸດ ແລະອາຍຸຍືນ.
- ທໍາຄວາມສະອາດ: ແຕ່ລະໄລຍະ, ດ້ວຍການປິດໄຟແລະ lamp cooled, gently wipe the lamp ເຊັດພື້ນຜິວດ້ວຍຜ້າອ່ອນ, ແຫ້ງ, ບໍ່ມີຂົນເພື່ອກຳຈັດຝຸ່ນ ແລະ ສິ່ງເສດເຫຼືອ. ຢ່າໃຊ້ນໍ້າຢາທຳຄວາມສະອາດໂດຍກົງໃສ່ l.amp.
- Lamp ການທົດແທນ: ແທນ lamp when it reaches the end of its rated life (indicated by flickering, dimming, or failure to ignite) or if it becomes damaged. Always replace with a lamp ປະເພດດຽວກັນແລະວັດtage to ensure compatibility and proper operation. Refer to the 'Setup and Installation' section for replacement procedures.
- ການກວດກາ Fixture: Regularly inspect the lighting fixture for any signs of wear, corrosion, or loose connections. Address any issues promptly.
ການແກ້ໄຂບັນຫາ
ຖ້າ l ຂອງທ່ານamp is not functioning correctly, try the following troubleshooting steps:
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| Lamp ບໍ່ເຮັດໃຫ້ມີແສງ | ບໍ່ມີພະລັງງານທີ່ຈະ fixture Lamp not properly seated ຜິດປົກກະຕິ lamp ballast ຜິດປົກກະຕິ Defective starter (if applicable) | ກວດເບິ່ງເຄື່ອງຕັດວົງຈອນ ແລະສະວິດຝາ ນັ່ງ l ຄືນamp (see Setup) ແທນທີ່ດ້ວຍ l ໃຫມ່amp ປຶກສາຫາລືກັບຊ່າງໄຟຟ້າທີ່ມີຄຸນວຸດທິ Replace starter |
| Lamp flickers ຫຼືຮອບວຽນເປີດ / ປິດ | Lamp ໃກ້ຈະສິ້ນສຸດຊີວິດ ບໍ່ຖືກຕ້ອງ lamp type for ballast ອຸນຫະພູມສະພາບແວດລ້ອມຕໍ່າ ballast ຜິດປົກກະຕິ | ແທນ lamp ຮັບປະກັນ lamp matches fixture specifications ອະນຸຍາດ lamp to warm up; ensure proper operating environment ປຶກສາຫາລືກັບຊ່າງໄຟຟ້າທີ່ມີຄຸນວຸດທິ |
| ຫຼຸດຄວາມສະຫວ່າງ | ຝຸ່ນ/ສິ່ງສົກກະປົກຢູ່ເທິງ lamp Lamp ໃກ້ຈະສິ້ນສຸດຊີວິດ ບໍ່ຖືກຕ້ອງ lamp ປະເພດ | ເຮັດຄວາມສະອາດ lamp (see Maintenance) ແທນ lamp ຮັບປະກັນ lamp matches fixture specifications |
| ສິ້ນສຸດຂອງ lamp are dark | Normal aging Frequent switching ballast ຜິດປົກກະຕິ | ແທນ lamp when performance degrades Minimize frequent on/off cycles ປຶກສາຫາລືກັບຊ່າງໄຟຟ້າທີ່ມີຄຸນວຸດທິ |
If problems persist after attempting these solutions, consult a qualified electrician or contact OSRAM SYLVANIA customer support.
ຂໍ້ມູນຈໍາເພາະ
Key technical specifications for the OSRAM SYLVANIA OCTRON 800 ECOLOGIC Linear Fluorescent Lamp, Model 22136:
- ໝາຍເລກຕົວແບບ: 22136
- Lamp ປະເພດ: T8 Linear Fluorescent
- ວັດtage: 17 ວັດ
- ປະເພດພື້ນຖານ: Medium Bi-pin
- ອຸນຫະພູມສີ: 3500 ເຄວິນ (ສີຂາວທີ່ເປັນກາງ)
- ດັດຊະນີການສະແດງສີ (CRI): 82
- Lumens ເບື້ອງຕົ້ນ: 1,350
- ຊົ່ວໂມງປະເມີນສະເລ່ຍ: 30,000 ຊົ່ວໂມງ
- ເສັ້ນຜ່າສູນກາງ: 1.098 ນິ້ວ
- ຄວາມຍາວ: 24 inches (approximate, depending on measurement method)
- ຂະໜາດຜະລິດຕະພັນ: 7.75 x 6.13 x 25 inches (packaging/case dimensions)
- ນ້ໍາຫນັກລາຍການ: 6.59 pounds (for a case of lamps)
- Ecologic Feature: Designed for environmental responsibility.
ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
For information regarding the product warranty, please refer to the documentation provided with your purchase or visit the official OSRAM SYLVANIA website. For technical support or further assistance, please contact OSRAM SYLVANIA customer service through their official channels.
