1. ບົດແນະນຳ
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Pedrollo UPm2/4-GE Multi-Stage Submersible Electric Water Pump. Please read this manual thoroughly before installation and use, and retain it for future reference.
The Pedrollo UP series of multi-stage submersible pumps features an innovative design that prevents impellers from blocking, even after extended periods of inactivity. This design ensures high efficiency and reliability, making these pumps suitable for clean water applications in domestic, civil, and agricultural settings. Typical uses include water distribution with pressure sets, garden and allotment irrigation, and pressure boosting.
2. ຂໍ້ມູນຄວາມປອດໄພ
ໃຫ້ປະຕິບັດຕາມຂໍ້ຄວນລະວັງດ້ານຄວາມປອດໄພຕໍ່ໄປນີ້ສະເໝີເພື່ອປ້ອງກັນການບາດເຈັບສ່ວນຕົວ ແລະ ຄວາມເສຍຫາຍຕໍ່ປໍ້າ:
- ໃຫ້ແນ່ໃຈວ່າການສະຫນອງພະລັງງານກົງກັບ vol ຂອງປັ໊ມtage ຄວາມຕ້ອງການ (240V).
- ຕັດການເຊື່ອມຕໍ່ໄຟຟ້າກ່ອນທີ່ຈະປະຕິບັດການຕິດຕັ້ງ, ການບຳລຸງຮັກສາ ຫຼື ວຽກງານສ້ອມແປງໃດໆ.
- Do not operate the pump with damaged cables or if the pump itself is visibly damaged.
- The pump is designed for clean water only. Do not use it for flammable, corrosive, or abrasive liquids.
- Ensure proper grounding of the electrical system.
- Keep children and unauthorized personnel away from the pump's operating area.
- Do not lift the pump by its electrical cable. Use a rope or chain attached to the pump's lifting eye.
3. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ
Proper installation is crucial for the pump's performance and longevity. Refer to the diagram below for a typical installation setup.
ຮູບທີ 1: Typical installation diagram, performance curves, and dimensional data for Pedrollo UPm2/4-GE submersible pumps. This image illustrates how the pump should be submerged in a water source, connected to a discharge pipe, and includes technical specifications and performance characteristics.
- ການໃຕ້ນ້ຳ: The pump must be fully submerged in clean water. Ensure the water level is always above the pump's intake.
- ການຕິດຕັ້ງ: Secure the pump using a suitable rope or chain attached to the designated lifting point. Do not let the pump rest directly on the bottom if it's muddy or sandy.
- ທໍ່ລະບາຍ: Connect a discharge pipe of appropriate diameter to the pump's outlet. Ensure all connections are watertight.
- ການເຊື່ອມຕໍ່ໄຟຟ້າ: Connect the pump to a 240V power supply with proper grounding and a residual current device (RCD) for safety. Consult a qualified electrician if unsure.
- ສະຫຼັບ Float: If equipped with a float switch (as shown in Figure 1), ensure it can move freely to control the pump's on/off cycles based on water level.
4. ຄໍາແນະນໍາການດໍາເນີນງານ
Once installed correctly, operating the Pedrollo UPm2/4-GE pump is straightforward:
- ການເລີ່ມຕົ້ນ: Ensure the pump is fully submerged and all connections are secure. Turn on the power supply. The pump will start automatically if the float switch is in the 'on' position (water level high enough).
- ການດໍາເນີນງານຢ່າງຕໍ່ເນື່ອງ: The pump is designed for continuous operation within its specified limits. Monitor the water level to prevent dry running, especially if not using a float switch.
- ປິດເຄື່ອງ: To stop the pump, turn off the power supply. If using a float switch, the pump will stop automatically when the water level drops below the minimum operating level.
- ຄຸນະພາບນ້ໍາ: The pump is intended for clean water. Pumping water with excessive sediment or debris can damage the impellers and motor.
5. ບໍາລຸງຮັກສາ
Regular maintenance ensures optimal performance and extends the pump's lifespan. Always disconnect power before maintenance.
- ທໍາຄວາມສະອາດ: Periodically inspect the pump's intake screen for blockages from debris. Clean as necessary.
- ການກວດສອບ Impeller: While the pump's design resists blocking, occasional inspection of the impellers for wear or damage is recommended, especially if performance degrades. This typically requires professional service.
- ການກວດສອບສາຍ: Check the power cable for any signs of damage, cuts, or fraying. Replace immediately if damaged.
- ລະດູໜາວ: In freezing climates, remove the pump from the water source and store it in a frost-free environment if it will not be used during winter. Drain all water from the pump and pipes.
6. ການແກ້ໄຂບັນຫາ
ຖ້າທ່ານພົບບັນຫາກັບປັ໊ມຂອງທ່ານ, ໃຫ້ອ້າງອີງເຖິງບັນຫາທົ່ວໄປຕໍ່ໄປນີ້ແລະວິທີແກ້ໄຂ:
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ປັ໊ມບໍ່ເລີ່ມຕົ້ນ | No power; Float switch in 'off' position; Motor overload; Damaged cable. | Check power supply and circuit breaker; Ensure float switch is free and water level is sufficient; Reset thermal overload protector (if present); Inspect and replace cable if damaged. |
| Pump runs but no water or low flow | Intake blocked; Air in system; Discharge pipe blocked or kinked; Low water level; Worn impellers. | Clean intake screen; Bleed air from the system; Check and clear discharge pipe; Ensure pump is fully submerged; Contact service for impeller inspection. |
| ປັ໊ມຢຸດໂດຍບໍ່ຄາດຄິດ | Overheating; Low water level (float switch activated); Electrical fault. | Allow pump to cool; Check water level; Inspect electrical connections and power supply. |
If troubleshooting steps do not resolve the issue, contact a qualified technician or Pedrollo customer support.
7. ຂໍ້ມູນຈໍາເພາະ
The following table details the technical specifications for the Pedrollo UPm2/4-GE Multi-Stage Submersible Electric Water Pump:
ຮູບທີ 2: ດ້ານໜ້າ view of the Pedrollo UPm2/4-GE Multi-Stage Submersible Electric Water Pump, showcasing its stainless steel body, blue power cable, and orange float switch.
| ຂໍ້ມູນຈໍາເພາະ | ມູນຄ່າ |
|---|---|
| ຍີ່ຫໍ້ | ເປໂດຣໂລ |
| ໝາຍເລກຕົວແບບ | UPm2/4 (48SP2120A1) |
| ພະລັງງານ | 1 Hp |
| ສະບັບtage | 240 ໂວນ |
| ວັດສະດຸ | ສະແຕນເລດ |
| ແຫຼ່ງພະລັງງານ | ສາຍໄຟຟ້າ |
| ອັດຕາການໄຫຼສູງສຸດ | 80 ລິດຕໍ່ນາທີ |
| ຄວາມສູງຍົກສູງສຸດ | 62 ແມັດ |
| ASIN | B018W45YV0 |
8. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
Specific warranty details for the Pedrollo UPm2/4-GE pump are not provided in this manual. For warranty information, please refer to the documentation included with your purchase or contact the seller (cemstore) or Pedrollo directly. For technical support or service, please reach out to the authorized Pedrollo service center in your region.
