1. ບົດແນະນຳ
This manual provides detailed instructions for the installation, operation, and maintenance of the GeoVision GV-MFD2501-6F 2MP Mini Fixed Dome IP Security Camera. Please read this manual thoroughly before using the product to ensure proper setup and functionality. Keep this manual for future reference.
1.1 ຜະລິດຕະພັນເກີນview
The GV-MFD2501-6F is a compact 2-megapixel mini fixed dome IP camera designed for various surveillance applications. It features a 2.3mm lens, super low lux capabilities, and supports network connectivity for remote monitoring.
Figure 1.1: GeoVision GV-MFD2501-6F Mini Fixed Dome IP Security Camera. This image shows the compact design of the camera, highlighting its dome shape and lens.
1.2 ເນື້ອໃນຊຸດ
Verify that all items are present in the package. If any items are missing or damaged, contact your dealer immediately.
- GV-MFD2501-6F IP Camera
- ຊຸດສະກູຕິດ
- ຄູ່ມືການຕິດຕັ້ງ
- Software CD (or download link)
- ຕົວເຊື່ອມຕໍ່ກັນນໍ້າ (ຖ້າມີ)
2. ຂໍ້ມູນຄວາມປອດໄພ
WARNING: To prevent fire or shock hazard, do not expose this unit to rain or moisture.
- ໃຊ້ພຽງແຕ່ອະແດັບເຕີໄຟທີ່ລະບຸໄວ້ສໍາລັບອຸປະກອນນີ້.
- Do not open the camera housing. Refer all servicing to qualified personnel.
- Avoid placing the camera in direct sunlight, near heat sources, or in areas with high humidity or dust.
- ຮັບປະກັນການລະບາຍອາກາດທີ່ເຫມາະສົມຮອບກ້ອງຖ່າຍຮູບ.
- ຕັດການເຊື່ອມຕໍ່ໄຟຟ້າກ່ອນທີ່ຈະທໍາຄວາມສະອາດຫຼືດໍາເນີນການບໍາລຸງຮັກສາ.
3. ຕັ້ງຄ່າ
3.1 ການຕິດຕັ້ງທາງດ້ານຮ່າງກາຍ
The GV-MFD2501-6F is designed for indoor use. Choose a suitable mounting location that provides the desired field of view and is within reach of network and power cables.
- ການກະກຽມດ້ານການຕິດຕັ້ງ: ໃຊ້ແມ່ແບບຕິດຕັ້ງທີ່ສະໜອງໃຫ້ (ຖ້າມີ) ເພື່ອໝາຍຮູເຈາະ.
- ຮູເຈາະ: ເຈາະຮູທົດລອງສໍາລັບ screws mounting.
- ຮັບປະກັນກ້ອງຖ່າຍຮູບ: Attach the camera base to the mounting surface using the provided screws.
- ປັບມຸມ: Loosen the adjustment screws to position the camera lens for the desired viewing angle, then tighten the screws to secure it.
Figure 3.1: Illustrative diagram of camera mounting. This image would typically show the steps for securing the camera to a ceiling or wall, including screw placement and cable routing.
3.2 ສາຍໄຟ ແລະ ການເຊື່ອມຕໍ່
Connect the camera to your network and power source.
- ສາຍ Ethernet: Connect an Ethernet cable from your network switch or router to the camera's RJ-45 port. If using Power over Ethernet (PoE), this single cable provides both power and data.
- Power Adapter (if not using PoE): If PoE is not available, connect a compatible 12V DC power adapter (not included) to the camera's power input port.
Figure 3.2: Diagram showing camera wiring connections. This image would illustrate how to connect the Ethernet cable and, if necessary, the power adapter to the camera's ports.
3.3 ການຕັ້ງຄ່າເຄືອຂ່າຍເບື້ອງຕົ້ນ
After physical installation and connection, configure the camera for network access.
- ເປີດ: ເຊື່ອມຕໍ່ກ້ອງຖ່າຍຮູບກັບແຫຼ່ງຈ່າຍໄຟ. ກ້ອງຖ່າຍຮູບຈະທົດສອບຕົວເອງ.
- ຄົ້ນພົບກ້ອງຖ່າຍຮູບ: Use the GeoVision GV-IP Device Utility (available on the GeoVision website) to discover the camera on your local network. The utility will display the camera's IP address.
- ການເຂົ້າເຖິງ Web ການໂຕ້ຕອບ: ເປີດ ກ web ໂປຣແກຣມທ່ອງເວັບ (ຕົວຢ່າງ, Chrome, Firefox) ແລະ ໃສ່ທີ່ຢູ່ IP ຂອງກ້ອງຖ່າຍຮູບໃນແຖບທີ່ຢູ່.
- ເຂົ້າສູ່ລະບົບ: Enter the default username (e.g., "admin") and password (e.g., "admin" or "1234"). You will be prompted to change the password upon first login for security.
- ການຕັ້ງຄ່າເຄືອຂ່າຍ: Navigate to the network settings to configure IP address (DHCP or Static), subnet mask, gateway, and DNS settings as required by your network environment.
4. ຄໍາແນະນໍາການດໍາເນີນງານ
Once configured, the camera can be accessed and managed through its web interface or compatible GeoVision VMS software.
4.1 ດໍາລົງຊີວິດ View
ຈາກ web interface, navigate to the "Live View" section to see the real-time video feed from the camera. You can adjust video stream settings such as resolution, frame rate, and quality here.
4.2 ການຕັ້ງຄ່າການບັນທຶກ
Configure recording schedules, motion detection recording, and continuous recording options. Recordings can be stored on a network-attached storage (NAS), local storage (if supported), or a GeoVision NVR/VMS.
4.3 ການກວດຈັບການເຄື່ອນໄຫວ
Set up motion detection zones and sensitivity levels. When motion is detected, the camera can trigger recording, send email alerts, or activate other alarm outputs.
4.4 ການເຂົ້າເຖິງໄລຍະໄກ
To access the camera remotely, ensure your network router is configured for port forwarding (if not using a VPN or cloud service). Refer to your router's manual for port forwarding instructions. GeoVision also offers mobile applications for remote viewing.
5. ບໍາລຸງຮັກສາ
5.1 ການທໍາຄວາມສະອາດກ້ອງຖ່າຍຮູບ
Regularly clean the camera lens and housing to ensure optimal image quality. Use a soft, dry cloth. For stubborn dirt, a slightly damp cloth with mild detergent can be used, followed by a dry cloth. Do not use abrasive cleaners or solvents.
5.2 ການອັບເດດເຟີມແວ
Periodically check the GeoVision webເວັບໄຊທ໌ສຳລັບການອັບເດດເຟີມແວ. ການອັບເດດເຟີມແວສາມາດສະໜອງຄຸນສົມບັດໃໝ່, ການປັບປຸງປະສິດທິພາບ ແລະ ການປັບປຸງຄວາມປອດໄພ. ປະຕິບັດຕາມຄຳແນະນຳທີ່ມີໃຫ້ພ້ອມກັບຊຸດອັບເດດເຟີມແວຢ່າງລະມັດລະວັງ.
5.3 ການຈັດການລະຫັດຜ່ານ
Regularly change your camera's password to a strong, unique password to prevent unauthorized access.
6. ການແກ້ໄຂບັນຫາ
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ບໍ່ມີພະລັງງານກັບກ້ອງຖ່າຍຮູບ | Power adapter unplugged or faulty; PoE not active. | Check power connections. Ensure PoE switch/injector is active. Test with a known good power source. |
| ບໍ່ມີຟີດວິດີໂອ | Network cable disconnected; incorrect IP address; firewall blocking access. | Verify Ethernet cable connection. Use GV-IP Device Utility to find camera. Check network settings and firewall rules. |
| ບໍ່ສາມາດເຂົ້າສູ່ລະບົບ | Incorrect username/password. | Ensure correct credentials. If forgotten, refer to the GeoVision website for password reset procedures (may require physical access). |
| ຄຸນນະພາບຮູບພາບບໍ່ດີ | Dirty lens; improper focus; low light conditions; incorrect video settings. | Clean the lens. Adjust focus if applicable. Ensure adequate lighting. Check resolution, frame rate, and compression settings. |
7. ຂໍ້ມູນຈໍາເພາະ
The following are key specifications for the GeoVision GV-MFD2501-6F camera:
- ຕົວແບບ: 84-MFD2501-6F1U
- ຄວາມລະອຽດ: 2 ລ້ານພິກເຊລ
- ເລນ: ເລນຄົງທີ່ 2.3 ມມ
- ການເຊື່ອມຕໍ່: ໄຮ້ສາຍ Note: While "Wireless" is listed in specifications, this IP camera primarily uses wired Ethernet for reliable data transmission and PoE. Wireless functionality may refer to specific optional modules or control methods.
- ພະລັງງານ: PoE (ພະລັງງານຜ່ານ Ethernet) ຫຼື 12V DC (ບໍ່ລວມອະແດບເຕີ)
- ຂະໜາດ: ຂະໜາດປະມານ 21 x 18.6 x 9.3 cm (Parcel Dimensions)
- ນ້ຳໜັກ: ປະມານ 487 g (Parcel Weight)
- ອຸນຫະພູມປະຕິບັດການ: (Information not provided, typical range is -10°C to 50°C)
- ຜູ້ຜະລິດ: GeoVision
8. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
8.1 ຂໍ້ມູນການຮັບປະກັນ
GeoVision products typically come with a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official GeoVision webເວັບໄຊ. ຮັກສາຫຼັກຖານການຊື້ຂອງທ່ານສໍາລັບການຮ້ອງຂໍການຮັບປະກັນ.
8.2 ສະຫນັບສະຫນູນດ້ານວິຊາການ
For technical assistance, product inquiries, or troubleshooting beyond this manual, please contact GeoVision customer support or your authorized GeoVision dealer. Visit the official GeoVision webເວັບໄຊ (www.geovision.com.tw) for support resources, FAQs, and contact information.
