Reznor EMC-10-AK2-HG7

EMC-10 ຄູ່ມືຜູ້ໃຊ້ເຄື່ອງເຮັດຄວາມຮ້ອນຫນ່ວຍຕູ້ໄຟຟ້າ

Model: EMC-10-AK2-HG7 | Brand: Reznor

ສິນຄ້າເກີນview

The Reznor EMC-10-AK2-HG7 Electric Cabinet Unit Heater is designed for primary or supplementary heating, or freeze protection in various environments. This 208-volt unit features a two-speed motor and a maximum heat capacity of 34,144 BTU/hr. Its robust construction includes an 18-gauge stainless steel housing, tubular heating elements with fins, and an epoxy/polyester powder paint coating for enhanced corrosion resistance. The unit can be configured for either floor or ceiling mounting, offering flexible installation options.

Reznor EMC-10 Electric Cabinet Unit Heater

ຮູບພາບ: ທາງຫນ້າ view of the Reznor EMC-10 Electric Cabinet Unit Heater, showing its white cabinet, top and bottom grilles, and the "REZNOR" logo in red.

ຂໍ້ມູນຄວາມປອດໄພ

ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

The EMC-10 unit can be installed as a floor-mounted or ceiling-mounted system. Proper installation is crucial for safe and efficient operation. Refer to the detailed installation manual provided with the product for specific mounting instructions, electrical wiring diagrams, and clearance requirements.

ການເຊື່ອມຕໍ່ໄຟຟ້າ

ຄໍາແນະນໍາການດໍາເນີນງານ

The EMC-10 Electric Cabinet Unit Heater is equipped with a two-speed motor for flexible heating control. Operation is typically managed via an external thermostat or control system (not included with the unit).

ການດໍາເນີນງານພື້ນຖານ

  1. Ensure the unit is properly installed and connected to the power supply.
  2. Set the desired temperature on your external thermostat.
  3. The unit will activate when the ambient temperature falls below the thermostat setting.
  4. The two-speed motor allows for adjustment of airflow and heat distribution. Consult your control system's manual for specific fan speed selection.
  5. The high-temperature control with automatic reset provides an additional safety feature, shutting off the unit if overheating occurs.

ບໍາລຸງຮັກສາ

Regular maintenance ensures optimal performance and longevity of your Reznor EMC-10 unit. Always disconnect power before performing any maintenance.

ການແກ້ໄຂບັນຫາ

ກ່ອນທີ່ຈະຕິດຕໍ່ສະຫນັບສະຫນູນລູກຄ້າ, review ບັນຫາທົ່ວໄປ ແລະວິທີແກ້ໄຂບັນຫາຕໍ່ໄປນີ້:

ບັນຫາສາເຫດທີ່ເປັນໄປໄດ້ການແກ້ໄຂ
ຫນ່ວຍບໍລິການບໍ່ເປີດ.No power supply; tripped circuit breaker; thermostat set too low; safety control activated.Check power connection; reset circuit breaker; adjust thermostat setting; allow unit to cool if safety control tripped.
ຜົນຜະລິດຄວາມຮ້ອນບໍ່ພຽງພໍ.Blocked grilles; incorrect fan speed; unit undersized for space.Clear obstructions from grilles; ensure proper fan speed setting; consult a professional for sizing verification.
Unusual noises from unit.Loose components; motor issue; debris in fan.Disconnect power and inspect for loose parts; contact a qualified technician for motor inspection.

If the issue persists after attempting these solutions, please contact Reznor customer support.

ຂໍ້ມູນຈໍາເພາະ

ຂໍ້ມູນການຮັບປະກັນ

The Reznor EMC-10 Electric Cabinet Unit Heater comes with a ການຮັບປະກັນຊິ້ນສ່ວນ 1 ປີ from the date of purchase. This warranty covers defects in materials and workmanship under normal use and service. For warranty claims or detailed terms and conditions, please refer to the official warranty document included with your product or contact Reznor customer support.

ການຊ່ວຍເຫຼືອລູກຄ້າ

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Reznor customer support. Have your model number (EMC-10-AK2-HG7) and purchase date ready when you call.

Contact information for Reznor can typically be found on their official webສະຖານທີ່ຫຼືຢູ່ໃນການຫຸ້ມຫໍ່ຜະລິດຕະພັນ.

ເອກະສານທີ່ກ່ຽວຂ້ອງ - EMC-10-AK2-HG7

ກ່ອນview Reznor EUHC Indoor Commercial/Industrial Electric Unit Heater - ຂໍ້ມູນຈໍາເພາະ
ລາຍລະອຽດທາງດ້ານເຕັກນິກສໍາລັບເຄື່ອງເຮັດຄວາມຮ້ອນຫນ່ວຍໄຟຟ້າແບບກະທັດລັດ Reznor EUHC, ລວມທັງຂະຫນາດ, ຂໍ້ມູນໄຟຟ້າ, ການເກັບກູ້, ນ້ໍາຫນັກ, ແລະຄໍາແນະນໍາການຕິດຕັ້ງສໍາລັບການນໍາໃຊ້ທາງການຄ້າແລະອຸດສາຫະກໍາ.
ກ່ອນview Reznor EUH Series Electric Unit Heater Specifications Technical Specifications
ຂໍ້ມູນຈໍາເພາະທາງດ້ານວິຊາການທີ່ສົມບູນແບບສໍາລັບ Reznor EUH Series indoor commercial and industrial low-static axial fan electric resistive unit heaters, covering unit size, features, installation, dimensions, clearances, and electronic data.
ກ່ອນview Reznor EGHB Industrial Suspended Unit Heater: ຂໍ້ມູນຈໍາເພາະ, ຄຸນສົມບັດ, ແລະຄູ່ມືການຕິດຕັ້ງ
ຂໍ້ມູນສະເພາະດ້ານເຕັກນິກ, ຄຸນສົມບັດ, ຂໍ້ແນະນຳໃນການຕິດຕັ້ງ ແລະຂໍ້ມູນຂະໜາດຂອງເຄື່ອງເຮັດຄວາມຮ້ອນໜ່ວຍໄຟຟ້າແບບລະງັບແບບອຸດສາຫະກຳ Reznor EGHB, ອອກແບບມາສຳລັບພື້ນທີ່ການຄ້າ ແລະອຸດສາຫະກຳ.
ກ່ອນview Reznor LDAP Model Downflow Unit ຄູ່ມືການທົດແທນເຄື່ອງເຮັດຄວາມຮ້ອນ
ຄູ່ມືສະບັບນີ້ໃຫ້ຂໍ້ມູນລະອຽດກ່ຽວກັບພາກສ່ວນການທົດແທນສໍາລັບ Reznor LDAP model downflow unit heaters. ມັນກວມເອົາໄຟຟ້າ, venter, ພັດລົມ, ແລກປ່ຽນຄວາມຮ້ອນ, burner, ແລະອົງປະກອບຕູ້, ຄຽງຄູ່ກັບອຸປະກອນເສີມແລະທາງເລືອກ. ລວມມີການຖອດລະຫັດເລກ serial, ລາຍລະອຽດການຮັບປະກັນ, ແລະຂໍ້ກໍາຫນົດດ້ານວິຊາການສໍາລັບຂະຫນາດຫນ່ວຍງານຕ່າງໆ.
ກ່ອນview Reznor EHA Series ສະຖາປັດຕະຍະກຳເຄື່ອງເຮັດຄວາມຮ້ອນແບບຕິດຝາດ້ວຍໄຟຟ້າ
ລາຍລະອຽດສະເພາະດ້ານເຕັກນິກຂອງ Reznor EHA Series ເຄື່ອງເຮັດຄວາມຮ້ອນແບບຕິດຝາດ້ວຍໄຟຟ້າແບບບັງຄັບໃຊ້ໃນອາຄານ ແລະທີ່ຢູ່ອາໄສ, ກວມເອົາຂະໜາດຫົວໜ່ວຍ, ຄຸນສົມບັດ, ທາງເລືອກໃນການຕິດຕັ້ງ, ຂໍ້ມູນດ້ານວິຊາການ, ຂະໜາດ ແລະຂໍ້ແນະນຳດ້ານຄວາມປອດໄພ.
ກ່ອນview Reznor Ceiling Suspension Kit ຄູ່ມືການຕິດຕັ້ງສໍາລັບເຄື່ອງເຮັດຄວາມຮ້ອນຫນ່ວຍບໍລິການໄຟຟ້າແລະອາຍແກັສ
ຄຳແນະນຳໃນການຕິດຕັ້ງ ແລະ ລາຍລະອຽດຂອງສ່ວນປະກອບສຳລັບຊຸດຕິດຕັ້ງເພດານ Reznor CK22, ເຂົ້າກັນໄດ້ກັບເຄື່ອງເຮັດຄວາມຮ້ອນໄຟຟ້າ EHU ແລະ ເຄື່ອງເຮັດຄວາມຮ້ອນທີ່ໃຊ້ແກັສ UDXC, UDX, UDZ. ຮຽນຮູ້ວິທີການຕິດຕັ້ງເຄື່ອງເຮັດຄວາມຮ້ອນ Reznor ຂອງທ່ານຢ່າງປອດໄພ.