ຄູ່ມືການໃຊ້ງານເຄື່ອງວັດດ້ວຍປາກກາ Ohaus ST10C-A

1. ບົດແນະນຳ

The Ohaus ST10C-A Pen Meter is designed for simple, fast, and accurate measurement. This economical device offers reliable performance for various applications. Its durable construction and user-friendly features make it suitable for consistent use in diverse environments.

2. ຜະລິດຕະພັນເກີນview

The ST10C-A Pen Meter is a compact, handheld device. Key features include a clear digital display, an intuitive on/off button, a protective sensor cap, and a wrist strap for secure handling.

ຮູບທີ 1: Ohaus ST10C-A Pen Meter. This image shows the Ohaus ST10C-A Pen Meter. It features a digital display for pH readings, an 'On/Off' button, and a durable, waterproof design with red accents.

The meter's IP67 waterproof ABS housing ensures protection against dust and water ingress, making it suitable for wet conditions. An automatic shutdown feature helps conserve battery life.

3. ຕັ້ງຄ່າ

1. ການຫຸ້ມຫໍ່: Carefully remove the meter and all accessories from the packaging. Inspect for any damage.
2. ການ​ຕິດ​ຕັ້ງ​ຫມໍ້​ໄຟ​: The meter typically comes with batteries pre-installed or requires simple installation. Refer to the battery compartment cover for instructions on opening and inserting batteries, ensuring correct polarity.
3. Sensor Preparation: Remove the protective sensor cap. If the sensor appears dry, condition it according to standard pH electrode practices (e.g., soaking in storage solution or pH 7 buffer for a short period).
4. ການ​ສອບ​ທຽບ​ເບື້ອງ​ຕົ້ນ​: For optimal accuracy, perform an initial calibration using fresh pH buffer solutions (e.g., pH 4.01, 7.00, and 10.01). Follow the calibration procedure outlined in the meter's specific quick start guide or on-screen prompts.

4. ຄໍາແນະນໍາການດໍາເນີນງານ

1. ເປີດ/ປິດ: ກົດ ເປີດ/ປິດ button located on the front of the meter to turn the device on or off.
2. ການ​ວັດ​ແທກ​:
   • Ensure the sensor cap is removed.
   • Rinse the sensor with distilled water before and after each measurement.
   • ເອົາເຊັນເຊີເຂົ້າໄປໃນ sample solution, ensuring the sensor tip is fully submerged.
   • Gently stir the solution to ensure homogeneity and allow the reading to stabilize.
   • Read the pH value displayed on the screen once it becomes stable.
3. ປິດອັດຕະໂນມັດ: The meter is equipped with an automatic shutdown feature to conserve battery life. It will power off after a period of inactivity.

5. ບໍາລຸງຮັກສາ

• ການເຮັດຄວາມສະອາດເຊັນເຊີ: After each use, rinse the sensor thoroughly with distilled or deionized water. Do not wipe the sensor bulb, as this can cause static charges and damage the sensitive glass.
• ການເກັບຮັກສາ: Always replace the protective sensor cap after use. Ensure the cap contains a small amount of storage solution (or pH 7 buffer) to keep the sensor hydrated. Never store the sensor dry or in distilled water.
• ການປ່ຽນແບັດເຕີຣີ: When the battery indicator appears on the display, replace the batteries promptly. Refer to the battery compartment for the correct battery type and installation procedure.
• ທໍາຄວາມສະອາດທົ່ວໄປ: The meter's housing can be cleaned with a damp ຜ້າ. ຫຼີກເວັ້ນການນໍາໃຊ້ສານເຄມີທີ່ຮຸນແຮງຫຼືເຄື່ອງເຮັດຄວາມສະອາດຂັດ.

6. ການແກ້ໄຂບັນຫາ

7. ຂໍ້ມູນຈໍາເພາະ

• ຕົວແບບ: ST10C-A
• ຍີ່ຫໍ້: ໂອໂຮສ
• ທີ່ຢູ່ອາໄສ: IP67 waterproof ABS
• ຄຸນສົມບັດ: Protective sensor cap, automatic shutdown, wrist strap
• ຂະໜາດ: Approximately 15 x 10 x 4 inches (Product dimensions as listed, note this might be packaging size)
• ນ້ຳໜັກ: Approximately 2 Pounds (Product weight as listed, might be shipping weight)

Note: Specific measurement ranges, accuracy, and resolution details should be confirmed with the official Ohaus product data sheet.

8. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For detailed warranty information, technical support, or service inquiries, please refer to the official Ohaus website or contact your local Ohaus representative. Keep your purchase receipt for warranty claims.

Official Ohaus Webເວັບໄຊ: www.ohaus.com