VILTROX JY-710-C1 Wireless Remote Shutter Timer Controller Instruction Manual

1. ບົດແນະນຳ

The VILTROX JY-710-C1 is a 2.4GHz wireless remote shutter timer controller designed for Canon EOS cameras. This device allows for precise control over your camera's shutter, enabling various shooting modes including single shot, continuous shooting, BULB mode, delay shooting, and advanced timer schedule shooting. Its wireless functionality provides flexibility, while the wired option ensures reliability. This manual provides detailed instructions for setup, operation, and maintenance of your JY-710-C1.

2. ເນື້ອໃນຊຸດ

ກະລຸນາກວດເບິ່ງວ່າລາຍການທັງໝົດຕໍ່ໄປນີ້ແມ່ນລວມຢູ່ໃນຊຸດຂອງທ່ານ:

• 1 x JY-710 Transmitter Unit
• 1 x JY-710 Receiver Unit
• 1 x Shutter Connection Cord (C1 type for Canon cameras)
• 1 x ຄູ່ມືການສອນ

3. ອົງປະກອບຂອງຜະລິດຕະພັນ

3.1 ຫນ່ວຍສົ່ງສັນຍານ

The transmitter features an LCD display for settings, navigation buttons, and a shutter release button. It is used to configure and initiate shooting sequences.

ຮູບທີ 3.1: Close-up of the JY-710-C1 Transmitter Unit. This image shows the ergonomic design of the transmitter, with its clear LCD display and accessible control buttons for setting various timer functions.

3.2 ໜ່ວຍຮັບສັນຍານ

The receiver unit connects to your camera's remote port and receives signals from the transmitter. It features a channel selector switch and a battery compartment.

ຮູບທີ 3.2: Close-up of the JY-710-C1 Receiver Unit. This image highlights the receiver's compact size, the FSK 2.4GHz wireless technology indicator, and the channel selection switch (1, 2, 3, 4).

4. ຕັ້ງຄ່າ

4.1 ການຕິດຕັ້ງຫມໍ້ໄຟ

Both the transmitter and receiver units require two AAA 1.5V LR03 alkaline batteries each. To install:

1. Open the battery compartment cover on the back of both the transmitter and receiver.
2. ໃສ່ໝໍ້ໄຟ AAA ສອງໜ່ວຍ, ຮັບປະກັນການຂົ້ວທີ່ຖືກຕ້ອງ (+/-).
3. ປິດຝາປິດຊ່ອງໃສ່ຫມໍ້ໄຟຢ່າງປອດໄພ.

4.2 Connecting to Camera (Wireless Mode)

For wireless operation, the receiver unit connects to your camera.

1. Attach the receiver unit to your camera's hot shoe (optional, for secure mounting).
2. Connect one end of the provided shutter connection cord to the receiver unit's port.
3. Connect the other end of the shutter connection cord to your camera's remote control terminal.
4. Ensure both the transmitter and receiver are powered on and set to the same channel (1-4) using the channel selector switch on the receiver.

ຮູບທີ 4.1: Wireless Setup with Transmitter and Receiver. This image illustrates the complete wireless setup, showing the transmitter in use and the receiver connected to a Canon DSLR camera mounted on a tripod.

4.3 Connecting to Camera (Wired Mode)

The transmitter can also be used as a wired remote control by connecting it directly to the camera.

1. Connect one end of the provided shutter connection cord to the transmitter unit's port.
2. Connect the other end of the shutter connection cord to your camera's remote control terminal.
3. The receiver unit is not needed for wired operation.

ຮູບທີ 4.2: Wired Connection Example. This image shows the receiver unit connected directly to a Canon camera, demonstrating how the unit can function as a wired remote when the transmitter is not used wirelessly.

5. ຮູບແບບການເຮັດວຽກພື້ນຖານ

The JY-710-C1 supports several basic shooting modes:

• ຍິງດ່ຽວ: Press the shutter button on the transmitter halfway to focus, then fully to take a single photo.
• 1s Continuous Shooting: Hold the shutter button fully pressed for continuous shots.
• BULB Shooting: For long exposures, press the shutter button fully and release to start the exposure. Press again to end the exposure.
• ການຍິງຊ້າ: Set a delay time before the shutter is released.

6. Timer Schedule Shooting

The JY-710-C1 offers advanced timer functions for automated shooting sequences. Use the navigation buttons on the transmitter to select and adjust parameters.

6.1 ການຕັ້ງຄ່າພາລາມິເຕີ

The transmitter's LCD displays various parameters: DELAY, LONG (exposure time), INTNL (interval), and N (number of shots). Use the SET button to enter editing mode and the arrow buttons to adjust values.

• DELAY (Timer Delay): Sets the delay before the first shot. Range: 0s to 99hrs 59min 59s.
• LONG (Exposure Time): Sets the duration of each exposure. Range: 0s to 99hrs 59min 59s. This is used for BULB exposures.
• INTNL (Interval): Sets the time between each shot. Range: 1s to 99hrs 59min 59s.
• N (Number of Shots): Sets the total number of photos to be taken. Range: 1 to 399, or '--' for unlimited.

ຮູບທີ 6.1: Setting Timer Functions on the Transmitter. This image shows the transmitter's display with various timer settings (DELAY, LONG, INTNL, N) being adjusted, demonstrating the user interface for programming shooting sequences.

6.2 Starting a Timer Sequence

After setting your desired parameters, press the TIMER START/STOP button to begin the programmed shooting sequence. Press it again to stop the sequence.

7. ບໍາລຸງຮັກສາ

7.1 ການທໍາຄວາມສະອາດ

ເຊັດອຸປະກອນດ້ວຍຜ້າອ່ອນໆ, ແຫ້ງ. ຢ່າໃຊ້ເຄື່ອງເຮັດຄວາມສະອາດຂັດຫຼືສານລະລາຍ.

7.2 ການດູແລຫມໍ້ໄຟ

Remove batteries if the device will not be used for an extended period to prevent leakage. Replace batteries when the low battery indicator appears on the LCD.

8. ການແກ້ໄຂບັນຫາ

• ອຸປະກອນບໍ່ເປີດ: ກວດເບິ່ງການຕິດຕັ້ງແບດເຕີລີ່ແລະໃຫ້ແນ່ໃຈວ່າຫມໍ້ໄຟສົດ.
• Camera not responding (Wireless): Ensure both transmitter and receiver are powered on and set to the same channel. Verify the shutter connection cord is securely attached to both the receiver and camera. Check camera settings for remote control.
• Camera not responding (Wired): Ensure the shutter connection cord is securely attached to both the transmitter and camera. Check camera settings.
• ລຳດັບໂມງຈັບເວລາບໍ່ເລີ່ມຕົ້ນ: Ensure all timer parameters (DELAY, LONG, INTNL, N) are correctly set and the TIMER START/STOP ປຸ່ມໄດ້ຖືກກົດ.
• ແຊກແຊງ: If experiencing inconsistent wireless performance, try changing the channel on both the transmitter and receiver.

9. ຂໍ້ມູນຈໍາເພາະ

10. ຄວາມເຂົ້າກັນໄດ້

The VILTROX JY-710-C1 is compatible with the following Canon EOS camera models:

• EOS 80D, 77D, 70D, 60D, 60Da
• EOS 800D, 760D, 750D, 700D, 650D, 600D, 550D, 500D, 450D
• EOS 100D, 1300D, 1200D, 1100D, 1000D
• EOS M5, M6

11. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

VILTROX products are designed for reliability and performance. For warranty information and technical support, please refer to the official VILTROX webສະຖານທີ່ຫຼືຕິດຕໍ່ຜູ້ຈັດຈໍາຫນ່າຍທ້ອງຖິ່ນຂອງທ່ານ. ກະລຸນາຮັກສາຫຼັກຖານການຊື້ຂອງທ່ານສໍາລັບການຮຽກຮ້ອງການຮັບປະກັນ.