ແນະນຳ
The Polk Audio T50 Floor Standing Tower Speaker is engineered to deliver powerful, high-performance sound for both home theater and stereo applications. Featuring Polk's Dynamic Balance technology, a 1-inch silk dome tweeter, a 6.25-inch composite driver, and two front-firing sub-bass radiators, the T50 provides crisp highs, detailed mids, and deep, impactful bass. It is designed to integrate seamlessly into most home theater receivers and stereos, supporting Dolby and DTS for an immersive audio experience.
ແມ່ນຫຍັງຢູ່ໃນກ່ອງ
- 1 x Polk Audio T50 Tower Speaker
- 1 x Speaker Grille
- ບັດທະບຽນການຮັບປະກັນ
ຕັ້ງຄ່າ
Setting up your Polk Audio T50 Tower Speaker is designed to be straightforward. Follow these steps for optimal performance:
- ການຈັດວາງ: Position the tower speakers in your listening area, ensuring they are equidistant from your primary listening position for a balanced soundstage. For home theater setups, place them to the left and right of your television or projection screen.
- ການເຊື່ອມຕໍ່: Connect the speaker wire from your AV receiver or stereo amplifier to the 5-way binding posts on the back of the T50 speaker. Ensure correct polarity (positive to positive, negative to negative) for optimal sound reproduction.
- Grille Attachment: The speaker grille can be attached magnetically to the front of the speaker for protection and aesthetic preference.
- ການເຊື່ອມໂຍງລະບົບ: The T50 speakers are timbre-matched with other Polk T-Series speakers, allowing for seamless integration into a larger surround sound system (e.g., with T15 surrounds and a T30 center channel).
ຮູບ 1: ດ້ານຫລັງ view of the Polk Audio T50 speaker showing the 5-way binding posts for easy and secure wire hookup.
ຮູບທີ 2: ຕົວຢ່າງample placement of two Polk Audio T50 tower speakers in a home theater setup, demonstrating seamless sound integration.
ວິດີໂອທີ 1: ຈົບແລ້ວview of the Polk T-Series speakers, highlighting their design and features for home audio setups.
ປະຕິບັດການ
Once properly connected, your Polk Audio T50 speakers will operate in conjunction with your audio receiver or amplifier. Ensure your receiver is powered on and set to the correct input source. Adjust volume levels on your receiver. The T50 speakers are designed to reproduce a wide range of frequencies, providing clear audio for movies, music, and games.
Figure 3: The Polk Audio T50 speaker integrated into a home audio environment, ready for use.
ບໍາລຸງຮັກສາ
To ensure the longevity and optimal performance of your Polk Audio T50 speakers, follow these simple maintenance guidelines:
- ທໍາຄວາມສະອາດ: Gently wipe the speaker cabinets with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners, which can damage the finish.
- Grille Care: The speaker grilles can be carefully removed and dusted. If necessary, they can be gently vacuumed with a soft brush attachment.
- ສະພາບແວດລ້ອມ: Place speakers in a stable location away from direct sunlight, excessive heat, moisture, or extreme temperature changes. Ensure adequate ventilation around the speakers.
- ການເຊື່ອມຕໍ່: ກວດເບິ່ງການເຊື່ອມຕໍ່ສາຍລຳໂພງເປັນໄລຍະເພື່ອຮັບປະກັນວ່າພວກມັນປອດໄພ ແລະບໍ່ມີການກັດກ່ອນ.
ການແກ້ໄຂບັນຫາ
If you encounter issues with your Polk Audio T50 speakers, consider the following common troubleshooting steps:
- ບໍ່ມີສຽງ:
- Verify that your AV receiver or amplifier ເປີດແລະແຫຼ່ງປ້ອນທີ່ຖືກຕ້ອງຖືກເລືອກ.
- Check all speaker wire connections at both the speaker and the receiver for proper polarity and secure contact.
- Ensure the volume on your receiver is not muted or set too low.
- ສຽງບິດເບືອນ:
- ຫຼຸດລະດັບສຽງໃນເຄື່ອງຮັບສັນຍານຂອງທ່ານລົງ.
- Check speaker wire connections for any loose strands that might be touching each other or the wrong terminal.
- Ensure your receiver's impedance settings match the speaker's impedance (6 Ohms).
- ສຽງບໍ່ສະເຫມີພາບ:
- Confirm that both speakers are connected with correct polarity.
- Check speaker placement to ensure they are symmetrically positioned relative to your listening area.
- Adjust the balance settings on your AV receiver.
ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ຂໍ້ມູນຈໍາເພາະ |
|---|---|
| ປະເພດການຕິດຕັ້ງ | Floor Standing |
| ວັດສະດຸ | ໄມ້ |
| ຊື່ຕົວແບບ | T50 |
| ປະເພດລຳໂພງ | ຫໍ |
| ຄຸນນະສົມບັດພິເສດ | Hi-Res Audio, Multi-Room Audio |
| ການນໍາໃຊ້ທີ່ແນະນໍາ | ສໍາລັບລະບົບສຽງ Surround |
| ອຸປະກອນທີ່ເຂົ້າກັນໄດ້ | Most Home Theater AV Receivers |
| ເສັ້ນຜ່າສູນກາງຂອງ Subwoofer | 6.5 ນິ້ວ |
| ຈຳນວນຫົວໜ່ວຍ | 1.0 ນັບ |
| ການຕັ້ງຄ່າຊ່ອງສຽງອ້ອມຮອບ | 2.1, 5.1 |
| ສີ | ດຳ |
| ຂະໜາດສິນຄ້າ | 7.75"D x 8.75"W x 36.25"H |
| ນ້ໍາຫນັກລາຍການ | 20.35 ປອນ |
| impedance | 6 ໂອມ |
| ຂອບເຂດສູງສຸດ | 7 ແມັດ |
| ວິທີການຄວບຄຸມ | ແຕະ |
| ຂະຫນາດລໍາໂພງ | 6.5 ນິ້ວ |
| ແຫຼ່ງພະລັງງານ | ໄຟຟ້າສາຍ |
| Woofer ເສັ້ນຜ່າສູນກາງ | 6 ນິ້ວ |
| Tweeter ເສັ້ນຜ່າສູນກາງ | 1 ນິ້ວ |
| ປະເພດໄດເວີສຽງ | ໄດນາມິກໄດເວີ |
| ຂະໜາດໄດເວີສຽງ | 6.25 ນິ້ວ |
| ລຳໂພງກຳລັງຜົນຜະລິດສູງສຸດ | 150 ວັດ |
| ການຕອບສະໜອງຄວາມຖີ່ | 24000 Hz |
| ເຕັກໂນໂລຊີການເຊື່ອມຕໍ່ | ມີສາຍ |
| ຮູບແບບການອອກສຽງ | ອ້ອມຮອບ |
Figure 4: Detailed dimensions of the Polk Audio T50 Floor Standing Tower Speaker.
ຮັບປະກັນ
The Polk Audio T50 Floor Standing Tower Speaker comes with a Full Warranty. Please refer to the included Warranty Registration Card for specific terms, conditions, and registration details. Retain your proof of purchase for any warranty claims.
ສະຫນັບສະຫນູນ
For further assistance, technical support, or service inquiries regarding your Polk Audio T50 speakers, please visit the official Polk Audio website or contact their customer service department. You can find contact information on the Warranty Registration Card or the brand's official webເວັບໄຊ.
