Ampຄູ່ມືຜູ້ໃຊ້ຕົວປັບຄວາມເຄັ່ງຕຶງຂອງຕົວເຊື່ອມຕໍ່ວົງມົນ henol 10-101987-103

1. ບົດແນະນຳ

This document provides comprehensive instructions for the installation, operation, and maintenance of the Amphenol 10-101987-103 Circular Connector Strain Relief Adapter. This adapter is designed to provide robust strain relief for 6-pin circular connectors, enhancing cable durability and connection integrity in various applications.

ກະລຸນາອ່ານຄູ່ມືນີ້ຢ່າງລະອຽດກ່ອນທີ່ຈະພະຍາຍາມຕິດຕັ້ງຫຼືນໍາໃຊ້ເພື່ອຮັບປະກັນການເຮັດວຽກທີ່ເຫມາະສົມແລະຄວາມປອດໄພ.

2. ຜະລິດຕະພັນເກີນview

ໄດ້ Amphenol 10-101987-103 is a specialized accessory for circular connectors. It consists of a main adapter body and a two-piece clamp mechanism with securing screws. Its primary function is to prevent stress on cable connections by securing the cable firmly at the connector entry point.

ຮູບທີ 2.1: ເກີນview ຂອງ Amphenol 10-101987-103 strain relief adapter components, including the main body, two clamp pieces, and two screws.

ຮູບທີ 2.2: The strain relief adapter body shown with the two clamp pieces and screws positioned separately, illustrating the individual components.

ຮູບທີ 2.3: A ໃກ້ຊິດ view of the strain relief adapter body, with the clamp pieces and screws ready for assembly, demonstrating the design for cable retention.

3. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

Follow these steps to properly install the strain relief adapter onto your 6-pin circular connector:

1. Prepare the Connector: Ensure your 6-pin circular connector is fully assembled and wired according to its specific instructions.
2. Attach Adapter Body: Thread the main body of the 10-101987-103 adapter onto the rear of the circular connector. Tighten it securely by hand or with an appropriate tool, ensuring a snug fit without over-tightening.
3. ວາງຕຳແໜ່ງສາຍ: Route the cable through the opening of the adapter body.
4. ຕິດຕັ້ງ Clamp ຕ່ອນ: ວາງສອງ clamp pieces around the cable, inside the adapter body. Ensure the grooves on the clamp pieces align with the cable's diameter for a secure grip.
5. ຮັບປະກັນ Clamps: Insert the provided screws through the holes in the clamp pieces and into the threaded holes in the adapter body. Tighten the screws evenly until the cable is firmly gripped by the clamp, providing effective strain relief. Do not overtighten, as this may damage the cable jacket.
6. ຢືນຢັນການຕິດຕັ້ງ: Gently pull on the cable to confirm that it is securely held by the strain relief and that no undue stress is placed on the connector's internal connections.

4. ຫຼັກການດຳເນີນງານ

ເມື່ອ​ຕິດ​ຕັ້ງ​, ໄດ້​ Amphenol 10-101987-103 adapter functions passively to protect the cable-to-connector interface. It distributes mechanical stress (pulling, bending, twisting) away from the delicate solder joints or crimp connections within the circular connector, transferring it to the more robust cable jacket and the strain relief mechanism itself. This significantly extends the lifespan and reliability of the cable assembly.

5. ບໍາລຸງຮັກສາ

ໄດ້ Amphenol 10-101987-103 strain relief adapter requires minimal maintenance. Periodically inspect the adapter for the following:

• ຄວາມແໜ້ນໜາ: Ensure all screws and the main adapter body remain securely tightened. Re-tighten if any looseness is detected.
• ຄວາມເສຍຫາຍທາງກາຍ: Check for any cracks, bends, or corrosion on the metal components. Replace the adapter if significant damage is observed.
• ຄວາມສົມບູນຂອງສາຍ: Inspect the cable jacket where it enters and exits the strain relief for signs of wear or damage.

To clean, wipe the adapter with a dry, lint-free cloth. Avoid using harsh chemicals or abrasive materials that could damage the finish.

6. ການແກ້ໄຂບັນຫາ

This section addresses common issues that may arise during the installation or use of the strain relief adapter.

• ບັນຫາ: The adapter does not thread onto the circular connector.
  • ການແກ້ໄຂ: Verify that the circular connector is compatible with a Size 14 adapter. Ensure threads are clean and free of debris. Do not force the adapter.
• ບັນຫາ: The cable is not securely gripped by the clamp.
  • ການແກ້ໄຂ: Ensure the correct cable diameter is used for this strain relief. Re-check that the clamp pieces are correctly seated and the screws are tightened evenly and sufficiently.
• ບັນຫາ: Screws are difficult to tighten or loosen.
  • ການແກ້ໄຂ: Use the correct screwdriver size. If threads are stripped or damaged, the adapter may need replacement.

7. ຂໍ້ມູນຈໍາເພາະ

8. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For specific warranty information, please refer to the documentation provided at the point of purchase or contact Amphenol directly. General product support and technical assistance can be obtained through authorized Amphenol distributors or their official webເວັບໄຊ.

ສໍາລັບການຊ່ວຍເຫຼືອເພີ່ມເຕີມ, ກະລຸນາເຂົ້າໄປທີ່: www.amphenol.com