ແນະນຳ
The Hach Pocket Pro Low Range TDS Tester is designed to provide accurate and reliable measurements of Total Dissolved Solids (TDS) in various water samples. This compact and easy-to-use device features built-in diagnostics, replaceable batteries, and a large, easy-to-read LCD screen, making it ideal for field and laboratory use. This manual provides essential information for the proper setup, operation, and maintenance of your TDS tester.
ແມ່ນຫຍັງຢູ່ໃນກ່ອງ
- Hach Pocket Pro Low Range TDS Tester
- 4 ຫມໍ້ໄຟ AAA
- ສາຍສາກ
- ການແກ້ໄຂການປັບທຽບ
- ຄູ່ມືເລີ່ມຕົ້ນໄວ
ຄຸນນະສົມບັດທີ່ສໍາຄັນ
- Confidence in results
- ປະຫຍັດເວລາແລະເງິນ
- ຄວາມງ່າຍຂອງການນໍາໃຊ້
ຕັ້ງຄ່າ
ການຕິດຕັ້ງຫມໍ້ໄຟ
- ຊອກຫາຝາປິດຊ່ອງໃສ່ແບັດເຕີຣີຢູ່ດ້ານຫຼັງຂອງເຄື່ອງທົດສອບ.
- ເອົາຝາປິດອອກ.
- Insert 4 AAA batteries, ensuring correct polarity as indicated inside the compartment.
- ປ່ຽນຝາປິດຊ່ອງໃສ່ຫມໍ້ໄຟໃຫ້ປອດໄພ.
ການປັບທຽບເບື້ອງຕົ້ນ
For optimal accuracy, it is recommended to perform an initial calibration upon first use or after prolonged storage. Use the provided calibration solution for this process. Refer to the quick start guide for detailed calibration steps specific to your model.
ຄໍາແນະນໍາການດໍາເນີນງານ
ເປີດ/ປິດ
Press the power button (circular arrow icon) to turn the tester on. Press and hold the power button for a few seconds to turn it off.
ການວັດແທກ
- ໃຫ້ແນ່ໃຈວ່າເຄື່ອງທົດສອບສະອາດແລະແຫ້ງກ່ອນທີ່ຈະໃຊ້.
- Immerse the probe end of the tester into the sample solution, ensuring the sensor is fully submerged.
- Allow a few moments for the reading to stabilize on the large LCD screen. The display will show the TDS value and temperature.
- Record the measurement as needed.
- Rinse the probe with distilled water after each measurement to prevent cross-contamination.
ຄວາມເຂົ້າໃຈໃນການສະແດງ
The LCD screen displays the primary measurement (TDS) and the temperature. The device includes built-in diagnostics to assist with troubleshooting and ensure reliable readings.
ບໍາລຸງຮັກສາ
ທໍາຄວາມສະອາດ Probe ໄດ້
Regular cleaning of the probe is crucial for accurate readings. Rinse the probe thoroughly with distilled or deionized water after each use. For stubborn residues, gently wipe the probe with a soft cloth or cotton swab. Avoid abrasive materials that could damage the sensor.
ການປ່ຽນແບັດ
When the battery indicator appears on the display, replace the 4 AAA batteries as described in the Setup section. Always use fresh batteries for optimal performance.
ການເກັບຮັກສາ
Store the tester in a cool, dry place away from direct sunlight and extreme temperatures. Ensure the probe is clean and dry before storage. If storing for extended periods, remove the batteries to prevent leakage.
ການແກ້ໄຂບັນຫາ
ການອ່ານທີ່ບໍ່ຖືກຕ້ອງ
- ໃຫ້ແນ່ໃຈວ່າໂພຣບສະອາດ ແລະ ບໍ່ມີສິ່ງເສດເຫຼືອ.
- Perform a calibration using fresh calibration solution.
- Check for air bubbles around the probe during measurement.
- ກວດສອບ sample temperature is within the operating range.
No Display/Power Issues
- ກວດເບິ່ງວ່າແບັດເຕີລີຖືກຕິດຕັ້ງຢ່າງຖືກຕ້ອງແລະມີຄ່າພຽງພໍ. ປ່ຽນແທນຖ້າຈໍາເປັນ.
- ໃຫ້ແນ່ໃຈວ່າຝາປິດຊ່ອງໃສ່ຫມໍ້ໄຟປິດຢ່າງປອດໄພ.
Slow Response Time
- Clean the probe thoroughly.
- Allow sufficient time for the reading to stabilize, especially in samples with varying temperatures.
ຂໍ້ມູນຈໍາເພາະ
| ຄຸນລັກສະນະ | ມູນຄ່າ |
|---|---|
| ໝາຍເລກຕົວແບບ | 9531200 |
| ຍີ່ຫໍ້ | ແຮກ |
| ປະເພດການວັດແທກ | ເຄື່ອງວັດແທກ TDS |
| ແຫຼ່ງພະລັງງານ | ພະລັງງານຫມໍ້ໄຟ |
| ຕ້ອງໃຊ້ແບັດເຕີຣີ | ໝໍ້ໄຟ AAA 4 ອັນ (ລວມ) |
| ນ້ໍາຫນັກລາຍການ | 9.6 ອອນ |
| ຂະໜາດແພັກເກັດ | 8.74 x 4.72 x 2.36 ນິ້ວ |
| ຜູ້ຜະລິດ | ແຮກ |
| ວັນທີທໍາອິດທີ່ມີ | ວັນທີ 16 ທັນວາ 2014 |
ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
Hach products are manufactured to high standards of quality and reliability. For specific warranty information pertaining to your Hach 9531200 Pocket Pro Low Range TDS Tester, please refer to the documentation included with your purchase or visit the official Hach webເວັບໄຊ.
For further assistance, technical support, or to explore other Hach products, please visit the HACH Store on Amazon.