Vivere Double Cotton Hammock with Space-Saving Steel Stand Instruction Manual

ແນະນຳ

This manual provides comprehensive instructions for the assembly, operation, maintenance, and troubleshooting of your Vivere Double Cotton Hammock with Space-Saving Steel Stand. Please read all instructions carefully before use to ensure safe and proper setup.

ຂໍ້ມູນຄວາມປອດໄພ

• Always assemble the hammock stand on a flat, stable surface.
• ໃຫ້ແນ່ໃຈວ່າການເຊື່ອມຕໍ່ທັງຫມົດຖືກແຫນ້ນຢ່າງປອດໄພກ່ອນທີ່ຈະໃຊ້.
• ບໍ່ເກີນຄວາມອາດສາມາດນ້ໍາຫນັກສູງສຸດຂອງ 450 ປອນ (204 ກິໂລກໍາ).
• Keep children and pets away from the hammock during assembly.
• Regularly inspect the hammock fabric and stand for any signs of wear or damage. Discontinue use if damage is found.
• Do not stand on the hammock or use it as a swing.
• Avoid placing the hammock near open flames or heat sources.

ລາຍການຊິ້ນສ່ວນ

Before assembly, ensure all components are present.

• Hammock Fabric (1)
• Steel Stand Base Legs (2)
• Steel Stand Crossbar (1)
• Steel Stand Frame Bars (2)
• J-Hooks with Wing Nuts (2)
• Carrying Bag (1)
• Rubber End Caps (4 + 2 spare)

Image: The complete Vivere Double Cotton Hammock with its space-saving steel stand and accompanying carrying bag.

ຄໍາແນະນໍາຂອງສະພາແຫ່ງ

Follow these steps for quick and easy assembly. It is recommended to have two people for initial setup, though one person can manage.

Step 1: Lay Out Your Parts

Unpack all components and lay them out on a clear, flat surface. Identify the two base legs, the crossbar, and the two frame bars. Locate the two J-hooks with their wing nuts.

Image: All steel stand components laid out on a grassy area, ready for assembly.

Step 2: Attach Crossbar into Base Legs

Insert the ends of the crossbar into the designated openings on the two base legs. Ensure they are fully seated.

Step 3: Attach Frame Bar to Leg Base

Connect each frame bar to the top of its corresponding leg base. Secure these connections using the provided hand-tightened bolts.

Step 4: Attach J-Hook to Frame Bar

Insert a J-hook into the desired height adjustment hole on each frame bar. Secure it with the wing nut, ensuring it is tightened firmly.

Step 5: Attach Hammock to J-Hook on Frame Bar

Drape the hammock fabric over the J-hooks on both frame bars. Ensure the hammock is evenly distributed and securely resting on the hooks.

Video: An official Vivere video demonstrating the five easy steps to assemble the Vivere Double Cotton Hammock with Space-Saving Steel Stand. This video provides a visual guide for laying out parts, attaching the crossbar, connecting frame bars, securing J-hooks, and finally attaching the hammock.

Image: An adult and child comfortably seated in the assembled Vivere Double Cotton Hammock, demonstrating its capacity for two individuals.

Image: Two children sitting in the Vivere Double Cotton Hammock next to a swimming pool, highlighting its suitability for outdoor relaxation.

ຄໍາແນະນໍາການດໍາເນີນງານ

To use your hammock, gently sit in the center, allowing the fabric to conform to your body. For optimal comfort, adjust the J-hooks to achieve your preferred hammock height and tension. The hammock is designed for relaxation and light swaying motions.

ບໍາລຸງຮັກສາ

Cleaning the Hammock Fabric

The cotton hammock fabric can be hand washed with mild soap and cold water. Air dry completely before storing. Do not bleach or tumble dry.

Cleaning the Steel Stand

Wipe the steel stand with a damp cloth to remove dirt and debris. For stubborn stains, use a mild detergent. Ensure the stand is dry before storage to prevent rust.

ການເກັບຮັກສາ

When not in use, especially during inclement weather or off-season, disassemble the hammock and stand. Store all components in the provided carrying bag in a dry, cool place to prolong product life.

Image: A close-up of the Vivere Premium Carry Bag, designed for convenient storage and transport of the hammock and stand components.

ການແກ້ໄຂບັນຫາ

Hammock feels too low/high

Adjust the J-hooks on the frame bars to a different height setting. There are multiple holes for customization.

ຢືນຮູ້ສຶກບໍ່ໝັ້ນຄົງ

Ensure all bolts and wing nuts are securely tightened. Verify that the stand is placed on a completely flat and level surface.

ສຽງດັງ

Apply a small amount of lubricant to the J-hooks or any moving parts where metal meets metal.

ຂໍ້ມູນຈໍາເພາະ

ຂໍ້ມູນການຮັບປະກັນ

Vivere products are manufactured to high standards and are backed by a limited warranty. Please refer to the product packaging or the official Vivere webເວັບໄຊສໍາລັບເງື່ອນໄຂການຮັບປະກັນສະເພາະ.

ການຊ່ວຍເຫຼືອລູກຄ້າ

For further assistance, parts replacement, or any inquiries not covered in this manual, please contact Vivere customer support through their official webເວັບໄຊທ໌ຫຼືຮ້ານຂາຍຍ່ອຍບ່ອນທີ່ຜະລິດຕະພັນໄດ້ຖືກຊື້.