1. ຄໍາແນະນໍາກ່ຽວກັບຄວາມປອດໄພທົ່ວໄປ
ອ່ານ ແລະເຂົ້າໃຈທຸກຄຳເຕືອນຄວາມປອດໄພ, ຄຳແນະນຳ, ຮູບປະກອບ, ແລະຂໍ້ມູນສະເພາະທີ່ສະໜອງໃຫ້ກັບເຄື່ອງມືພະລັງງານນີ້. ການບໍ່ປະຕິບັດຕາມຄໍາແນະນໍາທັງຫມົດທີ່ລະບຸໄວ້ຂ້າງລຸ່ມນີ້ອາດຈະເຮັດໃຫ້ໄຟຟ້າຊ໊ອກ, ໄຟໄຫມ້, ແລະ / ຫຼືການບາດເຈັບທີ່ຮ້າຍແຮງ.
- ຄວາມປອດໄພໃນພື້ນທີ່ເຮັດວຽກ: ຮັກສາພື້ນທີ່ບ່ອນເຮັດວຽກຂອງເຈົ້າໃຫ້ສະອາດ ແລະ ມີແສງສະຫວ່າງດີ. ພື້ນທີ່ວຸ້ນວາຍ ຫຼືບ່ອນມືດພາໃຫ້ເກີດອຸປະຕິເຫດ. ຫ້າມໃຊ້ເຄື່ອງມືໄຟຟ້າໃນບັນຍາກາດທີ່ລະເບີດ, ເຊັ່ນໃນທີ່ປະທັບຂອງຂອງແຫຼວ, ອາຍແກັສ, ຫຼືຝຸ່ນ.
- ຄວາມປອດໄພທາງໄຟຟ້າ: ປລັກເຄື່ອງມືໄຟຟ້າຕ້ອງກົງກັບປລັກສຽບໄຟ. ບໍ່ເຄີຍດັດແປງປລັກສຽບໃນທາງໃດກໍ່ຕາມ. ຢ່າໃຊ້ສາຍບື. ຫ້າມໃຊ້ສາຍເພື່ອຖື, ດຶງ, ຫຼືຖອດສາຍໄຟ. ຮັກສາສາຍໄຟໃຫ້ຫ່າງຈາກຄວາມຮ້ອນ, ນໍ້າມັນ, ແຄມແຫຼມ, ຫຼືພາກສ່ວນທີ່ເຄື່ອນຍ້າຍ.
- ຄວາມປອດໄພສ່ວນຕົວ: Always wear eye protection, dust mask, non-skid safety shoes, hard hat, or hearing protection for appropriate conditions. Stay alert, watch what you are doing, and use common sense when operating a power tool.
- ການນໍາໃຊ້ແລະການດູແລເຄື່ອງມື: ຢ່າບັງຄັບເຄື່ອງມືພະລັງງານ. ໃຊ້ເຄື່ອງມືພະລັງງານທີ່ຖືກຕ້ອງສໍາລັບຄໍາຮ້ອງສະຫມັກຂອງທ່ານ. ຖອດປລັກສຽບອອກຈາກແຫຼ່ງພະລັງງານກ່ອນທີ່ຈະເຮັດການປັບ, ປ່ຽນອຸປະກອນເສີມ, ຫຼືເກັບຮັກສາເຄື່ອງມືພະລັງງານ.
- Specific Miter Saw Safety: ໃຫ້ແນ່ໃຈວ່າ workpiece ໄດ້ຢ່າງປອດໄພ clamped before cutting. Keep hands clear of the cutting area and the blade. Allow the blade to reach full speed before beginning a cut.
2. ຜະລິດຕະພັນເກີນview ແລະອົງປະກອບ
The Einhell TC-MS 2513 L Miter Saw is designed for precise and efficient cutting tasks. Familiarize yourself with its key components for safe and effective operation.
ຮູບທີ 2.1: ໂດຍລວມ view of the Einhell TC-MS 2513 L Miter Saw, showcasing its compact and robust design with the dust collection bag attached.
ຮູບທີ 2.2: A user demonstrating the proper stance and operation of the miter saw for cutting a wooden workpiece.
ຮູບທີ 2.3: ໃກ້ຊິດ view of the integrated laser guide, projecting a precise line onto the workpiece for accurate cutting alignment.
ຮູບທີ 2.4: The adjustable X-Tend supports, designed to provide stable support for longer workpieces during cutting operations.
ຮູບທີ 2.5: Illustration of the saw head tilting mechanism, allowing for easy adjustment to achieve precise miter cuts.
ຮູບທີ 2.6: A close-up of the high-quality carbide-tipped saw blade, designed for clean and powerful cuts.
ອົງປະກອບທີ່ສໍາຄັນ:
- Swivel Plate: High-quality base with exact angle adjustment for angular cuts.
- ຫົວເລື່ອຍ: Can be tilted to the left for miter cuts.
- ຄູ່ມືເລເຊີ: Mains-powered laser marks the cutting line for quick and precise positioning.
- Clampອຸປະກອນ ing: Robust mechanism to securely fix workpieces.
- X-Tend Supports: Adjustable supports for processing long workpieces.
- Integrated Stop: Ensures precise and repeatable cuts.
- Saw Blade: Superior quality carbide-tipped blade for clean and powerful cutting.
- ຖົງເກັບຂີ້ຝຸ່ນ: Effective for maintaining a clean workplace by collecting sawdust.
- ມືຈັບ: For simple and safe transportation of the tool.
3. ຕັ້ງຄ່າ
ກ່ອນທີ່ຈະໃຊ້ງານເລື່ອຍຕັດມຸມ, ໃຫ້ແນ່ໃຈວ່າມັນຖືກຕິດຕັ້ງ ແລະ ຮັດແໜ້ນຢ່າງຖືກຕ້ອງ.
- ການຫຸ້ມຫໍ່ແລະການກວດກາ: Carefully remove the saw from its packaging. Inspect all components for any damage that may have occurred during transit. Ensure all listed parts are present.
- ການຕິດຕັ້ງເລື່ອຍ: For stable operation, it is recommended to mount the miter saw to a workbench or a stable stand using appropriate fasteners.
- Attaching the Dust Bag: Connect the provided dust collection bag to the dust extraction port on the saw. Ensure it is securely fastened to effectively collect sawdust during operation.
- Adjusting X-Tend Supports: Extend the X-Tend supports as needed to provide adequate support for the length of your workpiece. These supports can be adjusted with one hand.
- ການເຊື່ອມຕໍ່ພະລັງງານ: Connect the saw's power cord to a suitable 230V power outlet. Ensure the power switch is in the OFF position before plugging in.
4. ຄໍາແນະນໍາການດໍາເນີນງານ
Follow these steps for safe and effective operation of your Einhell TC-MS 2513 L Miter Saw.
- Workpiece Placement: Place the workpiece firmly against the fence and on the saw table.
- Securing the Workpiece: Use the robust clamping device to securely fix the workpiece in place. This is crucial for preventing movement during cutting and ensuring safety.
- Setting the Cutting Angle (Miter Cut):
- Loosen the locking handle for the swivel plate.
- Rotate the swivel plate to the desired angle, indicated on the scale. The high-quality swivel plate allows for exact angle adjustment.
- Lock the swivel plate in position with one hand.
- Setting the Bevel Angle (Tilt Cut):
- To make miter cuts, the saw head can be tilted to the left.
- Adjust the tilt angle as required and secure it.
- Using the Laser Guide: Activate the mains-powered laser. The laser line will project onto your workpiece, indicating the precise cutting path. Use this guide for quick and accurate positioning.
- ການຕັດ:
- Ensure the area around the blade is clear of obstructions and your hands.
- Press the power switch to start the saw. Allow the blade to reach its full operating speed (4000 rpm) before beginning the cut.
- Slowly and steadily lower the saw blade through the workpiece. Do not force the saw.
- ເມື່ອຕັດສຳເລັດແລ້ວ, ໃຫ້ປ່ອຍສະວິດໄຟ ແລະ ປ່ອຍໃຫ້ໃບມີດຢຸດສະງັດກ່ອນທີ່ຈະຍົກຫົວເລື່ອຍຂຶ້ນ.
- Using the Integrated Stop: For repetitive cuts of the same length, utilize the integrated stop feature to ensure consistent and precise results.
ຮູບທີ 4.1: Diagram illustrating various cutting angles and their corresponding maximum cutting capacities (e.g., 90°x90°: 130x75 mm, 45°x45°: 95x35 mm).
5. ບໍາລຸງຮັກສາ
ການບຳລຸງຮັກສາເປັນປະຈຳຮັບປະກັນອາຍຸການໃຊ້ງານທີ່ຍາວນານ ແລະ ປະສິດທິພາບທີ່ດີທີ່ສຸດຂອງເລື່ອຍຕັດຂອງທ່ານ.
- ທໍາຄວາມສະອາດ: After each use, disconnect the saw from the power supply. Clean the saw thoroughly, especially around the blade guard, table, and dust collection port, to remove sawdust and debris. The sawdust collection bag should be emptied regularly.
- ການກວດກາ ແລະ ການປ່ຽນແຜ່ນໃບ: Regularly inspect the carbide-tipped saw blade for sharpness and damage. A dull or damaged blade can lead to poor cuts and increased strain on the motor. Replace the blade when necessary, following the instructions in your detailed product manual for safe blade removal and installation.
- ການລະບາຍສີ: Periodically lubricate moving parts as recommended in the full product manual to ensure smooth operation.
- ການກວດກາສາຍໄຟ: Check the power cord for any signs of damage, cuts, or fraying. Replace damaged cords immediately by a qualified professional.
6. ການແກ້ໄຂບັນຫາ
ພາກນີ້ແກ້ໄຂບັນຫາທົ່ວໄປທີ່ທ່ານອາດຈະພົບກັບເລື່ອຍຕັດມຸມຂອງທ່ານ.
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| Saw ບໍ່ເລີ່ມຕົ້ນ | No power supply; Faulty switch; Motor overload protection activated | ກວດສອບການເຊື່ອມຕໍ່ພະລັງງານ; ຕິດຕໍ່ສູນບໍລິການ; ປ່ອຍໃຫ້ມໍເຕີເຢັນລົງ |
| ການຕັດບໍ່ຖືກຕ້ອງ | Dull blade; Incorrect angle setting; Workpiece not clamped ຢ່າງປອດໄພ | Replace blade; Re-adjust angle precisely; Secure workpiece firmly with clampໃນອຸປະກອນ |
| Excessive dust/chips | Dust bag full or improperly attached; Clogged dust port | Empty and reattach dust bag; Clear any blockages in the dust port |
| Saw blade binds in workpiece | Workpiece not supported; Forcing the cut; Dull blade | Use X-Tend supports; Do not force, let saw do the work; Replace blade |
ຖ້າທ່ານພົບບັນຫາທີ່ບໍ່ໄດ້ລະບຸໄວ້ຢູ່ນີ້ ຫຼື ຖ້າວິທີແກ້ໄຂບໍ່ສາມາດແກ້ໄຂບັນຫາໄດ້, ກະລຸນາຕິດຕໍ່ຝ່າຍສະໜັບສະໜູນລູກຄ້າຂອງ Einhell.
7. ຂໍ້ມູນຈໍາເພາະ
Technical data for the Einhell TC-MS 2513 L Miter Saw:
ຮູບທີ 7.1: Icon indicating a blade diameter of 250 mm and 48 teeth.
ຮູບທີ 7.2: Icon representing the integrated laser guide feature.
ຮູບທີ 7.3: Icon indicating a maximum cutting width of 130 mm.
ຮູບທີ 7.4: Icon indicating a maximum cutting height of 75 mm.
- ຕົວແບບ: TC-MS 2513 L
- ໝາຍເລກຕົວແບບ: 4300850
- ການປ້ອນຂໍ້ມູນພະລັງງານ: 1200 ວັດ
- ສະບັບtage: 230 ໂວນ
- ຄວາມໄວບໍ່ມີການໂຫຼດ: 4000 rpm
- ເສັ້ນຜ່າສູນກາງຂອງແຜ່ນໃບຄ້າຍຄື: 250 ມມ
- ຈໍານວນແຂ້ວ: 48
- ສູງສຸດ. ຄວາມກວ້າງການຕັດ: 120 mm (at 90°)
- ສູງສຸດ. ຄວາມເລິກການຕັດ: 75 mm (at 90°)
- ຂະໜາດ (L x W x H): 73 x 66.8 x 52.5 cm
- ນ້ຳໜັກ: 9.75 ກິໂລກຣາມ
- ຄວາມຍາວສາຍ: 1.4 ແມັດ
- ວັດສະດຸຈັບ: ໂພລີໂພລີນ
- ຄຸນນະສົມບັດພິເສດ: Depth adjustment, Laser, X-Tend supports
- ອົງປະກອບລວມ: 1 Miter Saw, 1 Saw Blade, 1 Dust Bag
8. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
Einhell is committed to the quality and longevity of its products.
- ການຮັບປະກັນຂະຫຍາຍ: In addition to the standard warranty, Einhell offers an extended 3-year warranty on all Einhell devices upon online registration. To activate this extended service, products must be registered on the official Einhell webສະຖານທີ່ພາຍໃນ 30 ມື້ຂອງການຊື້.
- ການຊ່ວຍເຫຼືອລູກຄ້າ: For further assistance, technical support, or spare parts, please visit the official Einhell webເວັບໄຊ ຫຼືຕິດຕໍ່ພະແນກບໍລິການລູກຄ້າຂອງເຂົາເຈົ້າ.
ຮູບທີ 8.1: Badge indicating the 3-year warranty available upon online registration.
