ຕູ້ເຊັບເຟີນີເຈີ JUWEL 7613 ພ້ອມດ້ວຍການປະສົມປະສານດິຈິຕອນ - ຄູ່ມືຜູ້ໃຊ້

1. ບົດແນະນຳ

Thank you for choosing the JUWEL 7613 Furniture Safe. This high-quality safe, made in Italy, features a reliable digital electronic combination system for securing your valuables. This manual provides essential information for the proper installation, operation, and maintenance of your safe to ensure its longevity and your peace of mind. Please read these instructions carefully before using the safe.

ຮູບທີ 1: The JUWEL 7613 Furniture Safe with its door open, revealing the digital keypad on the inside of the door and the two robust locking bolts. The interior is a contrasting teal color, and the JUWEL logo is visible on the top left of the safe's exterior.

2. ຕັ້ງຄ່າ

2.1 ການຫຸ້ມຫໍ່

• Carefully remove the safe from its packaging.
• Inspect the safe for any signs of damage. If damaged, contact your supplier immediately.
• Retain packaging materials for future transport or storage if necessary.

2.2 ການຕິດຕັ້ງຫມໍ້ໄຟ

The safe's digital combination system is powered by 6V (4 x LR6 AA 1.5V) batteries. An emergency power supply is also possible using a 9V (6LR61) battery.

1. Locate the battery compartment, typically on the inside of the safe door or behind the keypad.
2. Insert 4 new LR6 AA 1.5V alkaline batteries, ensuring correct polarity (+/-).
3. ປິດຝາປິດຊ່ອງໃສ່ຫມໍ້ໄຟຢ່າງປອດໄພ.
4. For emergency power, a 9V (6LR61) battery can be connected to the external contacts on the keypad if the internal batteries are depleted.

2.3 ການຕິດຕັ້ງ

The JUWEL 7613 safe is designed for wall mounting. Proper installation is crucial for security.

• Choose a discreet and secure location for mounting.
• Ensure the mounting surface (e.g., a solid wall) can support the weight of the safe and its contents.
• Use appropriate fasteners (not included) for your specific wall type.
• Consult a professional for installation if you are unsure.

2.4 ການຕັ້ງຄ່າລະຫັດເບື້ອງຕົ້ນ

Upon first use, you will need to set your personal digital combination. Refer to the specific instructions provided with your safe for the exact procedure, as it may vary slightly. Generally, this involves:

1. With the safe door open, locate the internal reset button (often red or a small hole requiring a pin).
2. Press the reset button. The keypad should emit a beep and/or a light will illuminate.
3. Enter your desired new code (typically 3-8 digits) on the keypad.
4. Confirm the code by pressing the 'E' or 'OK' button.
5. Test the new code several times with the door open before closing it.

ສຳຄັນ: Choose a memorable but not easily guessable code. Do not write down your code near the safe.

3. ຄໍາແນະນໍາການດໍາເນີນງານ

3.1 ການເປີດຕູ້ເຊັບ

1. Enter your personal digital combination on the keypad.
2. Press the 'E' or 'OK' button to confirm.
3. If the code is correct, the safe will beep, and the motor will engage to retract the locking bolts.
4. Turn the handle (if present) or pull the door open within a few seconds.

If an incorrect code is entered, an error indicator (e.g., 'ERROR' light) will illuminate, and the safe will remain locked. After multiple incorrect attempts, the safe may enter a lockout period.

3.2 Closing and Locking the Safe

1. ປິດປະຕູທີ່ປອດໄພຢ່າງແຫນ້ນຫນາ.
2. Turn the handle (if present) to extend the locking bolts. The safe will automatically lock.
3. Verify that the door is securely locked by gently attempting to open it.

3.3 Changing Your Digital Combination

It is recommended to change your code periodically for enhanced security.

1. Open the safe using your current code.
2. With the door open, press the internal reset button.
3. Enter your new desired code (3-8 digits).
4. Confirm the new code by pressing the 'E' or 'OK' button.
5. Test the new code multiple times with the door open before closing it.

4. ບໍາລຸງຮັກສາ

4.1 ການທົດແທນຫມໍ້ໄຟ

When the batteries are low, the keypad may indicate this with a warning light or weaker beeps. Replace all 4 AA batteries promptly to avoid being locked out.

• ເປີດປະຕູທີ່ປອດໄພ.
• ຖອດຝາປິດຊ່ອງໃສ່ຫມໍ້ໄຟ.
• Replace all old batteries with new LR6 AA 1.5V alkaline batteries, observing polarity.
• ປິດຝາປິດ.

4.2 ການທໍາຄວາມສະອາດ

ເຮັດຄວາມສະອາດດ້ານນອກຂອງຕູ້ນິລະໄພດ້ວຍຜ້າອ່ອນ, ງamp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or the electronic components.

5. ການແກ້ໄຂບັນຫາ

5.1 Safe Does Not Open After Entering Code

• ລະຫັດບໍ່ຖືກຕ້ອງ: Ensure you are entering the correct digital combination. Try again carefully.
• ແບັດເຕີຣີຕໍ່າ: If the keypad lights are dim or there are no beeps, the batteries may be low. Replace them as described in Section 4.1.
• ພະລັງງານສຸກເສີນ: If internal batteries are completely dead, connect a 9V (6LR61) battery to the external contacts on the keypad to provide temporary power and open the safe.
• Lockout Period: If too many incorrect codes were entered, the safe may be in a temporary lockout state. Wait a few minutes and try again.

5.2 Keypad Unresponsive

• ແບັດເຕີຣີໝົດ: The most common cause. Replace all 4 AA batteries.
• Battery Polarity: Double-check that batteries are inserted with correct polarity.

5.3 Door Does Not Close Properly

• ອຸປະສັກ: Check for any items inside the safe that might be preventing the door from closing fully.
• Locking Bolts: Ensure the locking bolts are fully retracted before attempting to close the door.

6. ຂໍ້ມູນຈໍາເພາະ

7. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

This JUWEL safe is manufactured to high standards and comes with a manufacturer's warranty. Please refer to the warranty card included with your purchase or visit the official JUWEL webເວັບໄຊສໍາລັບເງື່ອນໄຂການຮັບປະກັນລາຍລະອຽດ.

For technical support, spare parts, or further assistance, please contact JUWEL customer service or your authorized dealer. You can often find contact information on the manufacturer's webເວັບໄຊ: www.juwel.it