Fieldpiece SC620 ບັນຈຸ Clamp ຄູ່ມືການໃຊ້ງານເຄື່ອງວັດມັລຕິມີເຕີພ້ອມຫົວໝຸນ

ແນະນຳ

The Fieldpiece SC620 is a professional-grade loaded clamp multimeter designed for HVACR technicians. It provides comprehensive electrical measurements including AC/DC voltage, AC current, DC microamps, frequency, temperature, and capacitance. This manual provides essential information for safe and effective operation of your SC620 multimeter. Please read this manual thoroughly before using the device.

ເນື້ອໃນຊຸດ

The Fieldpiece SC620 package typically includes:

• SC620 Clamp Multimeter
• Test Leads with Alligator Clips
• ແບດເຕີຣີ້ມາດຕະຖານ 9V (ລວມ)
• ຄູ່ມືຜູ້ໃຊ້ (ເອກະສານນີ້)

ຄຸນສົມບັດຜະລິດຕະພັນ

The Fieldpiece SC620 offers a range of features for HVACR diagnostics:

• ມາດຕະການ Volts AC/DC
• ມາດຕະການ 400 Amps AC
• ມາດຕະການ ຈຸນລະພາກamps DC for flame diode tests
• ມາດຕະການ ຄວາມຖີ່ via leads and clamp
• ບໍ່ມີການຕິດຕໍ່ voltage (NCV) ຕົວຊີ້ວັດ
• ຫົວຫມຸນ for easy access in tight spaces
• ສຽງສູງtage LED and beeper ເພື່ອຄວາມປອດໄພ
• Continuity warning
• Lead holder with detachable leads and alligator probe tips
• ອຸນຫະພູມ ແລະ ຄວາມຈຸ ການ​ວັດ​ແທກ​

ຕັ້ງຄ່າ

1. ການຕິດຕັ້ງຫມໍ້ໄຟ

The SC620 multimeter requires one 9V battery for operation. The battery is typically included with the device. To install or replace the battery:

1. ຊອກຫາຝາປິດຊ່ອງໃສ່ແບັດເຕີຣີຢູ່ດ້ານຫຼັງຂອງເຄື່ອງວັດມັນຕິມີເຕີ.
2. ໃຊ້ screwdriver ເພື່ອເປີດຊ່ອງໄດ້.
3. ໃສ່ແບັດເຕີຣີ 9V ໃໝ່, ໂດຍສັງເກດເບິ່ງຂົ້ວທີ່ຖືກຕ້ອງ (+/-).
4. ປິດຝາປິດຝາຫມໍ້ໄຟ.

2. ການເຊື່ອມຕໍ່ນໍາການທົດສອບ

Connect the red test lead to the VΩmA input jack and the black test lead to the COM input jack. Ensure the connections are firm. For current measurements using the clamp, no lead connection is required for the primary measurement, but leads may be used for other functions simultaneously.

ຄໍາແນະນໍາການດໍາເນີນງານ

1. ເປີດ/ປິດ

Rotate the function dial to any measurement setting to power on the multimeter. To power off, rotate the dial to the 'OFF' position.

2. AC/DC Voltage ການວັດແທກ

ການ​ວັດ​ແທກ voltage:

1. Rotate the function dial to the 'V~' (AC Voltagອ) ຫຼື 'V=' (ແຮງດັນໄຟຟ້າກະແສตรงtage) ຕໍາແໜ່ງ.
2. ເຊື່ອມຕໍ່ສາຍທົດສອບເຂົ້າກັບວົງຈອນແບບຂະໜານ.
3. ອ່ານ voltage ມູນຄ່າໃນການສະແດງຜົນ.

3. ການວັດແທກກະແສໄຟຟ້າ AC (Cl)amp)

ການ​ວັດ​ແທກ​ປະ​ຈຸ​ບັນ AC​:

1. Rotate the function dial to the 'A~' (AC Amps) ຕໍາແໜ່ງ.
2. ເປີດ clamp jaw and enclose a single conductor of the circuit.
3. Ensure the jaw is fully closed.
4. ອ່ານຄ່າປັດຈຸບັນຢູ່ໜ້າຈໍ.

4. DC Microamps ການ​ວັດ​ແທກ​

To measure DC microamps (e.g., for flame diode tests):

1. Rotate the function dial to the 'µA=' (DC Microamps) ຕໍາແໜ່ງ.
2. Connect the test leads in series with the component to be measured.
3. ອ່ານໄມໂຄຣampere value on the display.

5. Resistance and Continuity

To measure resistance or check continuity:

1. Rotate the function dial to the 'Ω' (Resistance) position.
2. ເຊື່ອມຕໍ່ສາຍທົດສອບຂ້າມອຸປະກອນ.
3. For continuity, the meter will beep if a low resistance path is detected.

6. ການວັດແທກຄວາມຖີ່

The SC620 can measure frequency via leads or clamp. Rotate the function dial to the 'Hz' position and follow the appropriate connection method.

7. ບໍ່ຕິດຕໍ່ Voltage (NCV)

Press the NCV button to activate the non-contact voltage detection feature. Hold the tip of the meter near a live AC voltagແຫຼ່ງອີເລັກໂທຣນິກ. ເຄື່ອງວັດຈະຊີ້ບອກເຖິງຄວາມມີຂອງແຮງດັນtage with an LED and an audible beep.

8. ເຄື່ອງວັດອຸນຫະພູມ

Connect a Type K thermocouple (if included, typically sold separately or as part of a kit) to the designated temperature input jacks. Rotate the function dial to the 'TEMP' position to measure temperature.

9. ການວັດແທກຄວາມອາດສາມາດ

ການ​ວັດ​ແທກ capacitance​:

1. Rotate the function dial to the 'nF' (Capacitance) position.
2. Ensure the capacitor is discharged before connecting the test leads.
3. ເຊື່ອມຕໍ່ຕົວນໍາການທົດສອບໃນທົ່ວ capacitor.
4. ອ່ານຄ່າ capacitance ເທິງ ໜ້າ ຈໍ.

ບໍາລຸງຮັກສາ

1. ທໍາຄວາມສະອາດ

ເຊັດເຄື່ອງວັດມິຕິດ້ວຍໂຄສະນາamp cloth. Do not use abrasive cleaners or solvents. Ensure the device is dry before storage or use.

2. ການທົດແທນຫມໍ້ໄຟ

Replace the 9V battery when the low battery indicator appears on the display. Refer to the 'Battery Installation' section for instructions.

3. ການເກັບຮັກສາ

Store the multimeter in a cool, dry place, away from direct sunlight and extreme temperatures. If storing for extended periods, remove the battery to prevent leakage.

ການແກ້ໄຂບັນຫາ

1. No Display or Faint Display

• Check battery charge. Replace the 9V battery if low.
• ໃຫ້ແນ່ໃຈວ່າປຸ່ມປັບຟັງຊັນບໍ່ໄດ້ຢູ່ໃນຕຳແໜ່ງ 'ປິດ'.

2. ການອ່ານທີ່ບໍ່ຖືກຕ້ອງ

• Verify test lead connections are secure and correct for the measurement type.
• ໃຫ້ແນ່ໃຈວ່າໄດ້ເລືອກຟັງຊັນ ແລະ ຂອບເຂດທີ່ຖືກຕ້ອງແລ້ວ.
• ກວດສອບສາຍທົດສອບທີ່ເສຍຫາຍ.
• For current measurements, ensure only one conductor is clamped.

3. No Continuity Beep

• Ensure the meter is in the continuity mode.
• Check for an open circuit or high resistance in the component being tested.

ຂໍ້ມູນຈໍາເພາະ

ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

ຂໍ້ມູນການຮັບປະກັນ

For detailed warranty information, please refer to the documentation provided with your purchase or visit the official Fieldpiece webເວັບໄຊ. ຮັກສາຫຼັກຖານການຊື້ຂອງທ່ານສໍາລັບການຮ້ອງຂໍການຮັບປະກັນ.

ການຊ່ວຍເຫຼືອລູກຄ້າ

If you encounter any issues or have questions regarding your Fieldpiece SC620 multimeter, please contact Fieldpiece customer support through their official webເວັບໄຊ ຫຼືຂໍ້ມູນການຕິດຕໍ່ທີ່ສະໜອງໃຫ້ຢູ່ໃນການຫຸ້ມຫໍ່ຜະລິດຕະພັນຂອງທ່ານ.