1. ບົດແນະນຳ
The NICE P1S Hand Transmitter is a compact and efficient remote control designed for various applications, primarily for door or gate systems. Operating at a frequency of 433.92 MHz, this transmitter features 5 distinct keys for versatile control. It is supplied with batteries and comprehensive instructions, ensuring a straightforward setup and programming process without the need for specialized equipment.
2. ການຕິດຕັ້ງແລະການຕິດຕັ້ງຫມໍ້ໄຟ
The NICE P1S Hand Transmitter comes with batteries included, making it ready for use after initial setup. Follow these steps for battery installation or replacement:
- ຊອກຫາຊ່ອງໃສ່ແບັດເຕີຣີຢູ່ດ້ານຫຼັງຂອງເຄື່ອງສົ່ງສັນຍານ.
- ເປີດຝາປິດ.
- Insert two 1.5V AAA (LR03) alkaline batteries, ensuring correct polarity (+/-).
- ປິດຝາປິດຊ່ອງໃສ່ຫມໍ້ໄຟຢ່າງປອດໄພ.
ໝາຍເຫດ: The transmitter requires 2 AA batteries, which are included. Ensure to use alkaline batteries for optimal performance.
3. ຄໍາແນະນໍາການດໍາເນີນງານ
The NICE P1S Hand Transmitter is designed for simple operation with its 5-button interface. Its radio frequency connectivity allows for a maximum range of 10 meters under optimal conditions.
3.1 Programming the Transmitter
The programming type for this device is a one-time registration with the receiver. Refer to your receiver's manual for specific instructions on how to put it into programming mode and register the new transmitter.
3.2 ການທໍາງານຂອງປຸ່ມ
The transmitter features 5 buttons. The specific function of each button (e.g., open, close, stop) will depend on how it is programmed with your door or gate system. Typically, the larger buttons control primary functions, while smaller buttons may control auxiliary features or specific modes.
Image of the NICE P1S Hand Transmitter, a white rectangular remote control with five grey buttons. The top button has an upward arrow, the middle button has a square, and the third button has a downward arrow. Below these are two smaller rows of circular buttons. The 'Nice' logo is visible at the bottom right.
4. ບໍາລຸງຮັກສາ
The NICE P1S Hand Transmitter requires minimal maintenance. The primary maintenance task is battery replacement when the transmitter's performance diminishes or it stops responding.
- ການປ່ຽນແບັດເຕີຣີ: Replace batteries as described in Section 2 when the indicator light (if present) signals low battery, or the range decreases significantly.
- ທໍາຄວາມສະອາດ: Use a soft, dry cloth to clean the exterior of the transmitter. Avoid using abrasive cleaners or solvents.
- ການເກັບຮັກສາ: Store the transmitter in a dry place, away from extreme temperatures and direct sunlight.
5. ການແກ້ໄຂບັນຫາ
If you experience issues with your NICE P1S Hand Transmitter, consider the following common solutions:
- ຕົວສົ່ງສັນຍານບໍ່ຕອບສະໜອງ:
- ກວດເບິ່ງວ່າໃສ່ແບັດເຕີລີ່ຖືກໃສ່ຢ່າງຖືກຕ້ອງຫຼືບໍ່. ປ່ຽນແທນຖ້າຈໍາເປັນ.
- Ensure you are within the maximum operating range (10 meters) of the receiver.
- Verify that the transmitter is properly programmed with the receiver. Re-program if needed.
- ຫຼຸດຜ່ອນໄລຍະການປະຕິບັດງານ:
- ປ່ຽນແບັດເຕີລີ.
- Check for obstructions between the transmitter and the receiver (e.g., thick walls, metal objects).
- Ensure there is no strong radio interference in the area.
If problems persist, consult a qualified technician or contact NICE customer support.
6. ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ລາຍລະອຽດ |
|---|---|
| ຍີ່ຫໍ້ | ງາມ |
| ຕົວແບບ | P1S |
| ຄວາມຖີ່ | 433.92 MHz |
| ຈໍານວນປຸ່ມ | 5 |
| ປະເພດຫມໍ້ໄຟ | 2 x 1.5V AAA (LR03) Alkaline |
| ຂະໜາດ (L x W x H) | 1.7 x 0.6 x 0.2 cm |
| ນ້ໍາຫນັກລາຍການ | 140 ກຣາມ |
| ເຕັກໂນໂລຊີການເຊື່ອມຕໍ່ | ຄວາມຖີ່ວິທະຍຸ |
| ຂອບເຂດສູງສຸດ | 10 ແມັດ |
| ປະເພດການຄວບຄຸມ | ການຄວບຄຸມປຸ່ມ |
7. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
The NICE P1S Hand Transmitter comes with a 1-year warranty, which includes the battery and instructions. For technical support, warranty claims, or further assistance, please refer to the contact information provided with your product packaging or visit the official NICE webເວັບໄຊ.
For more information, you may visit the product page: NICE P1S on Amazon.se
